Tring clearing how do I share

sc0tsman · Nov 21st 2011

Tring card clearing fine how do I share with another box in my house?

I have the card in a Conax cam

Oscam6018/Cccam213

Thanks lads.

**master G** · Nov 21st 2011

Create an F line in the CCcam.cfg on VU+ then add the C line to the other box.

F: vu duo

C: ipaddressofduo 12000 vu duo

This is a basic configuration, other restrictions can be added to the F and C line, but as its an internal share you`ve no need to restrict yourself.

sc0tsman · Nov 21st 2011

Quote from master G

Create an F line in the CCcam.cfg on VU+ then add the C line to the other box.

F: vu duo

C: ipaddressofduo 12000 vu duo

This is a basic configuration, other restrictions can be added to the F and C line, but as its an internal share you`ve no need to restrict yourself.

Display More

I did what you said Master but still nada, as you can see by the jpeg below no IP is showing. Is it correct oscam cannot share?

**master G** · Nov 21st 2011

You are going to need to setup a static ip address on the VU+ so the C line stays active for the new box.

Menu > Setup > System > Network > Adaptor Settings > Use DHCP no

This will set a static ip address and tell you the ip address you need to add to the C line.

In the image below the VU+ ip address is 192.168.1.67, so the C line would be C: 192.168.1.67 12000 vu duo

You are using oscam as cardreader so all shares are controlled by CCcam in CCcam.cfg.

glenviewjf · Nov 21st 2011

Quote

I have the card in a Conax cam

Correct me if i'm wrong but i thought you couldn't share a card if it were in a CAM?

**master G** · Nov 21st 2011

Quote from glenviewjf

Correct me if i'm wrong but i thought you couldn't share a card if it were in a CAM?

True, i missed that part, it needs to be in the top slot for Oscam+CCcam configs to work.

You can only view channels when its inside the conax cam, its not possible to share.

sc0tsman · Nov 22nd 2011

Is this correct guys...

Code

WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt 
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000




F: linuxsat support
N: 192.168.1.84 30001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
C: 192.168.1.84 12000 linuxsat support

Display More

**master G** · Nov 22nd 2011

You cant have differant connections using the same user and pass, they will conflict and only one will connect.

Put the C line in the openbox, not the Vu+, try this.

CCcam.cfg:

Code

F: vu duo
N: 127.0.0.1 30001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Openbox:

Code

C: 192.168.1.84 12000 vu duo

sc0tsman · Nov 22nd 2011

I did exactly as you said above it still aint clearing on top top slot :(

Thanks for your patience with this n00b ;)

**master G** · Nov 22nd 2011

Post your oscam.conf file so i can see what port the webinfo is using

sc0tsman · Nov 22nd 2011

Code

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log




[newcamd]
Key = 0102030405060708091011121314
Port = 34001@0BAA:000000




[webif]
httpport = 16002
httpuser = root
httppwd = xxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Display More

**master G** · Nov 22nd 2011

Easiest option is to install the attached ipk, then add the F line for the openbox.

FTP to /tmp/ press Green > yellow button > Manual install ipk packages > restart gui

sc0tsman · Nov 22nd 2011

Still not clearing, hopefully these errors will help

Code

0x65c6d0  	r 	1 	tring 	ONtring 	OFF 	127.0.0.1 	0 	internal 			0000:0000 		no data 	00:02:39 	NEEDINIT (no entitlements)No active entitlements found




2011/11/22 16:43:50 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6018 (mips-tuxbox-linux)
2011/11/22 16:43:50 0 s version=1.20-unstable_svn, build #6018, system=mips-tuxbox-linux, nice=-1
2011/11/22 16:43:50 0 s client max. idle=120 sec, debug level=0
2011/11/22 16:43:50 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/11/22 16:43:50 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/11/22 16:43:50 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2011/11/22 16:43:50 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/11/22 16:43:50 0 s signal handling initialized (type=sysv)
2011/11/22 16:43:50 0 s 11891 service-id's loaded in 165ms
2011/11/22 16:43:50 0 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-idï¿½s!
2011/11/22 16:43:50 0 s HINT: --> use optimized lists from [url=http://streamboard.gmc.to/wiki/index.php/Srvid]Srvid[/url]
2011/11/22 16:43:50 0 s 37 tier-id's loaded
2011/11/22 16:43:50 0 s 1000 provid's loaded
2011/11/22 16:43:50 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2011/11/22 16:43:50 0 s Starting listener 0
2011/11/22 16:43:50 0 s monitor: disabled
2011/11/22 16:43:50 0 s Starting listener 0
2011/11/22 16:43:50 0 s camd35: disabled
2011/11/22 16:43:50 0 s Starting listener 0
2011/11/22 16:43:50 0 s cs378x: disabled
2011/11/22 16:43:50 0 s Starting listener 0
2011/11/22 16:43:50 0 s newcamd: initialized (fd=7, port=34001, crypted)
2011/11/22 16:43:50 0 s -> CAID: 0BAA PROVID: 000000
2011/11/22 16:43:50 0 s Starting listener 0
2011/11/22 16:43:50 0 s pandora: disabled
2011/11/22 16:43:50 0 s Starting listener 0
2011/11/22 16:43:50 0 s radegast: disabled
2011/11/22 16:43:50 0 s http thread started
2011/11/22 16:43:50 0 s reader check thread started
2011/11/22 16:43:50 0 s check thread started
2011/11/22 16:43:50 0 s creating thread for device /dev/sci0
2011/11/22 16:43:50 65DE50 h HTTP Server listening on port 8888
2011/11/22 16:43:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/11/22 16:43:50 0 s waiting for local card init
2011/11/22 16:43:50 65C6D0 r reader tring initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/11/22 16:43:51 0 tring card detected
2011/11/22 16:43:54 65C6D0 r ERROR in IO_Serial_Read (errno=0 Success)
2011/11/22 16:43:54 65C6D0 r ATR: 00 00
2011/11/22 16:43:54 65C6D0 r ERROR: Could not read reader->convention
2011/11/22 16:43:54 65C6D0 r Error activating card.
2011/11/22 16:43:58 65C6D0 r ERROR in IO_Serial_Read (errno=0 Success)
2011/11/22 16:43:58 65C6D0 r ATR: 00 00
2011/11/22 16:43:58 65C6D0 r ERROR: Could not read reader->convention
2011/11/22 16:43:58 65C6D0 r Error activating card.
2011/11/22 16:44:02 65C6D0 r ERROR in IO_Serial_Read (errno=0 Success)
2011/11/22 16:44:02 65C6D0 r ATR: 00 00
2011/11/22 16:44:02 65C6D0 r ERROR: Could not read reader->convention
2011/11/22 16:44:02 65C6D0 r Error activating card.




Switch Debug from 0 to   0   1   2   4   8   16   32   64   128   255

Display More

**master G** · Nov 22nd 2011

Try restarting oscam in softcam manager and see if we get the card activated.

sc0tsman · Nov 22nd 2011

Still the same, I put card in cam and changed to common interface and tring super clears.

But wont clear in top slot on oscam/cccam

sc0tsman · Nov 22nd 2011

Sorted by a kind friend, please close.

Tring clearing how do I share

Participate now!

Share

Tags