SuperSim Japhar DM800HDse : OpenPLi 4.0 for EStar - SEPTEMBER 2015

There are 20 replies in this Thread which was already clicked 15,558 times. The last Post () by bartalisattila.

    SuperSim Japhar DM800HDse : OpenPLi 4.0 for EStar - SEPTEMBER 2015


    OpenPLi 4.0 for EStar by Japhar, with latest IPTV software working at the best, including 700 channels ! Download link below. Enjoy !



    By MastaG for Japhar Team


    Thank you !

    DM : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team


    Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!


    Changes since previous release:


    - mx3L's gstreamer revert which fixes mp4 playback from remote locations
    - Spark drivers updated to 20151113
    - Using aio-grab from oe-alliance which includes fixes for sprak receivers
    - New Japhar IPTV List (thanks to ToySoft).
    - DM8000 has no more gsod's now (thanks to ToySoft for testing!)


    Changes compared to openpli-oe-core gst-1:


    - Ships with gstreamer upstream master git:
    Using the same patches as openpli-oe-core gst-1 with only these changes:
    Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
    because this patch was already checked in upstream.
    Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
    By mx3L which fixes mp4 playback from remote locations.
    - Every receiver uses christophecvr's multibox dvbmediasink.
    - Using libtrmp and rtmpdump from oe-alliance.
    - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
    These are only applied for Dreambox receivers.
    - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
    - IPTV Player from samsamsam included (thx to Athoik for the recipe).
    - Large list of public IPTV streams included thanks to the Japhar Team.
    - Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
    - DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
    added si2166b blindscan support
    - Spark images includes the pti.ko from OpenATV so softcam's should work now.
    - Using aio-grab source from oe-alliance which includes fixes for spark receivers.
    - The 2.6.18 kernel will now always pass the vermagic check when loading modules.
    Now you can try and load any kernel driver from OE1.5 to 2.0.


    Known issues:


    - DM800 first boot will take a while, please be patient. The next boot will be faster.
    - On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
    We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
    - On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
    Because sometimes it doesn't scale back to fullscreen.
    I've included the MX-HQ7 skin for use as workaround.
    - On Zgemma Star you cannot use fullHD skins.
    This is a hardware/driver limitation.
    Please don't try it, it will crash enigma2.
    - Some Dreambox remotes behave very sensitive.
    This causes button presses to register multiple times instead of just once.
    As a workaround you can adjust the key interval:
    Go to: Menu - System - Input devices - dreambox remote control (native).
    Set "Change repeat and delay settings" to yes
    Set "Interval between keys when repeating:" to 200ms or 300ms.
    Press green button (OK)
    Now set the same delay for: "dreambox advanced remote control (native)" as well.


    To find the download link, search for MastaG Japhar OpenPLi 4.0


    Enjoy !


    Hi,
    I installed the september version for my decoder and it is quite unstable. Please can you provide the link for the estarbox 800 se? I made a lot of search, but I found only for no clone device.

    Image is very stable, please specify exactly where it is not stable and how it happens, did you installed no-compatible plugins ? As generally this is related to not working plugins.


    Triple Drivers are working,


    Mega Links for OpenPLi 4.0 IPTV (with more than 1000+ IPTV Free channels from all over the world) ;o)


    Code
    DM8000HD https://mega.nz/#!YRklVADa!jfV_0mM-6mvH1Gq5WGFs9-MdezwoUzLFubOFmA7VCAg
DM800HDse : https://mega.nz/#!pFFEWYhA!ZHlTSNw66NWkIAMgqBUNXuwtMR9uGY1UsOvFL_zNZBM
DM800HD : https://mega.nz/#!kYlVHRoD!pWuty-xvlEvNKK-8JhdvNgPFs4-rj6iGabO8Dk77bno
DM500HD : https://mega.nz/#!VMcAyQwC!Z4CxifG_3KpZ7EgULXs3KUQWp0Z88GSS8MW90MLYBkc


    Emo

    Edited once, last by emosim ().


    I have the e-star dreambox 800se HD that is a clone version. For me the japhar version of openPLi 4.0 is quite unstable. I'm using only e2 isettinge2 plugin.

    I installed this image but the avermedia a867 DTT doesn't work.
    I tryed install drivers from japhar addon manager, and from telnet with command "opkg install kernel-module-dvb-usb-a867".


    HELP please

    DM800HDse : OpenATV 6.1 for Japhar NC3 OE2.x Kernel 3.2 (BetaV4)



    The images are more or less untested, but since already openATV 6.1 Images distributed in div forums should be but more or less hardly give problems.



    The openATV 6.1 images are parallel to 6.0, please report with the box model.

    So we get an overview where it goes and where not.



    We are looking for moderators, supporters, plugin developers, skinner and graphic designers.



    We also look for c ++ developers who are familiar with GDI and graphics,

    Since after the Dreambox driver conversion we have massive performance problems with these devices when drawing the frame buffer.



    Also missing users who care more about Kodi plugins and their adaptation for STB boxes,

    The area is huge and we are looking for motivated users who would like to share their knowledge.



    The forum lives on your own, and the image also lives on your input and ideas.



    OpenATV is an open source Enigma2 community,

    And everything here is based on non profit businesses and is a pure hobby project,

    Even if it seems to some with the fact that we are doing this here professionally.



    We are just dependent the manufacturer support us and you also by your donations.


    MEGA :

    Code
    https://mega.nz/#!g6RCXY4S!TcN5TcjaMuYBFGiomdQT9nBCLogZzabQ1r584JIhNYs


    Enjoy ;o)


    TS

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login