thanks gor***
Here's the info (and files) to do it manually, in PB VX E2 OK...
here are the details of my OSCam 1.10 b. 5775, installed from the PB support server, plus the additionally installed configuration files, too...
It's a solo OSCam setup, i.e. OSCam is a server and a client, at the same time, no other cams are "helping out" at all!
The main config files will be quoted and the other ones find attached, guys - they must be according to your needs!
1) conf, user and server go to etc/tuxbox/conf folder, together with dvbapi, tiers, provid, services
2) module goes to usr/bin/cam -> CHMOD to 755
3) script .sh file goes to /usr/script/cam -> CHMOD to 755
I have a Conax original smart card (OSC)...
Make these files with Notepad++...
Save as -> All files -> name...
oscarm.conf:´
[global]
Nice = -1
ClientTimeout = 5
BindWait = 60
LogFile = stdout
CacheDelay = 120
preferlocalcards = 1
waitforcards = 1
saveinithistory = 1
lb_mode = 1
lb_save = 100
[webif]
httpport = xxxxx
httpuser = xxxxxxx
httppwd = xxxxxxxx
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httprefresh = 5
[dvbapi]
enabled = 1
au = 1
user = local_user
boxtype = dreambox
[newcamd]
key = 0102030405060708091011121314
port = xxxxx@0B00:000000
[cccam]
port = xxxxx
reshare = 3
ignorereshare = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 1
Display More
oscam.server:
[reader]
label = canal_digital
descriptioN = whatever_you_like
protocol = internal
device = /dev/sci0
group = 1
emmcache = 1,3,2
detect = cd
caid = 0B00
ident = 0B00:000000
services = CD Sweden
cardmhz = 357
mhz = 500
#external CCcam readers = my peer's servers, group 2
[reader]
label = xxxxxxx
enable = 1
protocol = cccam
device = xxxxxxxxx.dyndns.biz,xxxxxx
user = xxxxxxxx
password = xxxxxxxxxxx
lb_weight = 100
reconnecttimeout = 30
audisabled = 1
group = 2
cccversion = 2.1.3
cccmaxhops = 1
ccckeepalive = 1
emmcache = 1,3,2
fallback = 1
Display More
oscam.user:
[account]
user = name_it
group = 1,2
au = 1
services = all
monlevel = 4
betatunnel = 0300.FFFF:0100,0400.FFFF:0100
keepalive = 1
[account]
user = xxxxxxxx
pwd = xxxxxxxxx
group = 1
uniq = 40
au = 0
caid = 0B00
ident = 0B00:000000
monlevel = 4
Display More
In /usr/script/cam folder we have:
oscam_1.10.sh:
#!/bin/sh
OSD="Oscam_1.10"
PID=`pidof Oscam_1.10`
Action=$1
cam_clean () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
cam_handle () {
if test -z "${PID}" ; then
cam_up;
else
cam_down;
fi;
}
cam_down () {
killall Oscam_1.10
sleep 2
cam_clean
}
cam_up () {
/usr/bin/cam/Oscam_1.10 -c /etc/tuxbox/config &
}
if test "$Action" = "cam_res" ; then
cam_down
cam_up
elif test "$Action" = "cam_down" ; then
cam_down
elif test "$Action" = "cam_up" ; then
cam_up
else
cam_handle
fi
exit 0
Display More
With this it should work, if you put in your subscription's correct details, plus your peers' details...