alright guys i have got a white sly card with a phoniex usb reader i was wondering if there was a tut around for reading details and sharing this particular card cheers in advance
sly sharing help
- superlarrson
- Thread is marked as Resolved.
There are 18 replies in this Thread which was already clicked 1,224 times. The last Post () by superlarrson.
-
-
-
no its a old usb phoneix not sure if going to be of any use used it for the old funcards : )
http://www.infinityusb.com/default.asp?show=productsdetail&ProductID=11 this 1
-
The configs to read this card are attached.. You can use oscam or CCcam to share this card.. Plenty of guides on the forum for doing this..
FTP the oscam configs to /usr/local/etc
The device in oscam.server will need edited..
/dev/ttyS0 could be /dev/ttyS1, /dev/ttyS2, 3, 4 and so on, depending on which usb port is being used..
If the reader is not being recognized try this:
1. Open oscam web info and click on readers then edit reader.
2. At the bottom of the page you will see Device Out Endpoint:
change this to "0x81: Infinity USB Smart" save & restart. -
1 last question what do i use to read the card and thanks for help again
-
Not sure what you are asking here.. oscam can be card reader or emulator in your setup.. I know you setup a linux pc server, so you put the card into the phoenix reader, then the reader into the pc. Start oscam/CCcam then look at the oscam webinterface, check the log to see if there are any errors..
-
noproblem i will get back as soon as i have it all set up thanks again
- - - Updated - - -
i am unable to access my webif page
-
Did you FTP the attached oscam configs to /usr/local/etc & CCcam.cfg to /var/etc then restart both emulators in telnet ? How were you trying to access the oscam webinterface ? In a browser window like firefox do this http://192.168.1.92:8888 (change 192.168.1.92 to your servers ip address)
The webinterface details are in oscam.conf:
-
sorry i understand all that i am just not getting access i can access cccam page but no oscam
-
-
i have been able to access webif untill i changed the settings with configs you gave me im pretty sure its a problem with http allowed as you said i have tried different ways but still nothing and tried 2 browsers
-
Are you getting a 403 forbidden access denied error ? What is the ip address range on your network ? If you have the old configs copy the webif details from those..
-
yes access denied i cant find my old webif details : /
-
What is the ip address range on your network ?
Is this the guide you used to setup the pc that provided the original configs => Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install
-
unsure what and how to get address range sorry and yes thats the tut i used
- - - Updated - - -
NetRange: 81.0.0.0 - 81.255.255.255 ?
-
-
still nothing im stumpped now 1 thing i will say my oscam conf has chande from file type to notepad would this cause any issues
-
Don`t modify config files with notepad as this will save the files as oscam.conf.txt, Use notepad++.. Use your ftp tool to edit the file type, just remove the .txt
-
its ok im back in it seems to be if i remove the server config reader ect i get bk into webif i disabled with a hash got access when enabled no access so its the server config thats the problem
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!