hello guys, i was using cccam on my dreambox, and the box i was using 2 keep my card updated.. now i was told to change to mgcamd . i have mgcamd downloaded, but dont no what 2 do or how go about it.. any help
help with mgcamd
- predator
- Thread is marked as Resolved.
-
-
Mgcamd is only a client EMU, you will need a separate server or Mgcamd+CCcam on the same DM500.
-
ok, i got pc server(debian) smartgo , running oscam/cccam. working brill. but need my box 2 update card. so on my box, i run mgcamd/cccam. that will do the trick ya.. what altering do i do or change m8.
-
In oscam on the debian, create an n line and give it AU rights so it will update the card.
Install Mgcamd on the DM500 and look in /var/keys/newcamd.list, paste the n line in there.
You will also need to edit the mg_cfg in /var/keys/ to allow AU rights to gain entitlements.
-
master g, sorry to be a pain m8.. im not using n:lines, im still using c:lines. i have n:line connecting cccam to oscam. but still using f:lines and c:lines in cccam.cfg on server...
-
No problem buddy, post the ip address of debian and oscam configs you are using and i will tell you what to create.
-
m8, here are configs im using, only thing thats missing is N:line thats in cccam.cfg
ip of debian server 192.168.1.5
[global]
cachedelay = 120
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory =1
failbancount = 3
failbantime = 60[webif]
httpport = 8888
httpuser = admin
httppwd = #######
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols[newcamd]
key = 0102030405060708091011121314
port = 10001@0963:000000oscam.conf
[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 5
penalty = 0
aclogfile = /YOUR/PATH/ac.log
denysamples = 9
fakedelay = 1000oscam user
[account]
user = dream01
description = for local mgcamd or DVBAPI
pwd = dream02
disabled = 0
uniq = 1
group = 1
au = ***
caid = 0963:000000oscam server
[reader]
label = ***
protocol = smartreader
device = 003:002
caid = 0963
boxid = 0000000
ecmwhitelist = 0963@000000:3E,42,44,45,47,4E,53,54,61,62,68,69,6A ,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B
detect = cd
mhz = 369
cardmhz = 368
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101 -
i did try 2 get the above working with omnikey bet no joy... thanks for help m8.
-
Here are minimal configs to connect, you can add the anticascading if you want.
Backup your old oscam configs incase you have any problems.
Code
Display More###oscam.conf### [global] logfile = stdout cwlogdir = /var/log/oscam/cw nice = -1 maxlogsize = 0 preferlocalcards = 1 saveinithistory = 1 [monitor] port = 988 nocrypt = aulow = 120 hideclient_to = 0 monlevel = 1 appendchaninfo = 0 [newcamd] port = 10001@0963:000000 key = 0102030405060708091011121314 allowed = keepalive = 1 mgclient = 1 [webif] httpport = 8888 httpuser = httppwd = httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 httphideidleclients = 0 httpreadonly = 0 httpsavefullcfg = 0 ###oscam.server### [reader] label = slot1 enable = 1 protocol = smartreader device = 003:002 services = caid = 0963 ident = 0963:000000 detect = cd group = 1 emmcache = 1,3,2 ecmcache = 1 lb_weight = 100 ###oscam.user### [account] user = linuxsat pwd = support description = mgcamd monlevel = 0 uniq = 0 group = 1 au = 1 caid = 0963 ident = 0963:000000 [account] user = dream01 description = for local mgcamd or DVBAPI pwd = dream02 disabled = 0 uniq = 1 group = 1 au = 1 caid = 0963 ident = 0963:000000
N line for newcamd.list in /var/keys/
-
thanks m8 for your help.. grateful i will give em a try .. A1 master g
MGCamd Support Forum
Configs, discussion, downloads and guides for MGCamd Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!