Ubuntu Oscam Running Omnikey Sharing To CCCAM Running High Ecms HELP

Quote from nworulz

Hi all,
I have a ubuntu server Ubuntu 10.04.3 LTS
Running OSCAM 1.10rc-svn build #5775
With a Omnikey 3121 Via Usb Hub
Sharing To CCCAM 2.1.3 via 256
Problem that I am having is that the ECMS seem to have increased from where i was running the card directly in CCCAM on my dm500.
That card is a sly uk nds3 0963 card.
790 - Zee Cinema (ok) | 0.2286s |
534 - Blighty (ok) | 0.1335s
before they used to be as low as this i thought they would be lower
|174 - 5 USA (ok) | 0.0767s

It all shares fine its just the ecm times make it unwatchable.
My oscam files are as follows:
oscam.conf

[global]
logfile = stdout
nice = -1
preferlocalcards = 1
saveinithistory = 1

[monitor]
hideclient_to = 15
appendchaninfo = 0

[newcamd]
port = 10000@0963:000000
key = 0102030405060708091011121314

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.1.1-192.168.1.254

oscam.user

[account]
user = test1
pwd = test1
group = 1
uniq = 2
monlevel = 1
au = ***uk
caid = 0963
ident = 0963:000000

oscam.server

[reader]
label = ***uk
protocol = pcsc
enable = 1
device = 0
boxid = ******* blocked for safety
caid = 0963
detect = cd
mhz = 1200
cardmhz = 357
group = 11
emmcache = 1,1,7
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1

Has anyone got any ideas?
I have also tried two different omnikeys but cant seem to find out why this is happening.
BTW great site learning alot :feel_good:

Display More

Remove both these lines & restart oscam

mhz = 1200
cardmhz = 357

Also in oscam user you have set group 1 but for reader you have 11.

Quote from jojo36

try changing the mhz to 600 for both of them try that i read that on another forum somewhere

Thanks jojo36, but changing the clock frequency in oscam.server will only work on a receiver, if you are using external cardreader on ubuntu or debian its setup on the cardreader itself, not oscam config.