can I use Dreambox Control Center (DCC) for the zgemma 2s or should I use FileZilla
Cardsharing
- ste211270
- Thread is marked as Resolved.
-
-
DCC will work on any enigma2 receiver, the latest version is here -> DCC-E2 v1.50 - Dreambox Control Center
-
CCcam 2.3.0
ok guys got the card paired and working to my box this is my CCcam.cfg what should I add or delete# #
###############################################
#### Friends ####
###############################################
#
###############################################
#### Servers ####
###############################################
#
###############################################
#### NewcS ####
###############################################
# #
#N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# #
###############################################
#### Config ####
###############################################
# SERVER LISTEN PORT : #
SERVER LISTEN PORT: 12000
ALLOW WEBINFO: yes
WEBINFO USERNAME: root
WEBINFO PASSWORD: *****
WEBINFO LISTEN PORT: 12000
#
DISABLE EMM: no
SHOW TIMING: yes
EMM THREADS : 4
EXTRA EMM LEVEL: yes
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE: /var/etc/CCcam.prio
PROVIDERINFO FILE: /var/etc/CCcam.providers
CHANNELINFO FILE: /var/etc/CCcam.channelinfo
#
CARD READER: /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
BOXKEY: /dev/sci0 ** ** ** **
AU = yes
#
CARD READER: /dev/sci1
BOXKEY: /dev/sci1 ** ** ** **
AU = yes
#
SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000
BOXKEY: /dev/ttyUSB0 ** ** ** **- - - Updated - - -
CCcam 2.3.0
ok guys got the card paired and working to my box this is my CCcam.cfg what should I add or delete# #
###############################################
#### Friends ####
###############################################
#
###############################################
#### Servers ####
###############################################
#
###############################################
#### NewcS ####
###############################################
# #
#N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# #
###############################################
#### Config ####
###############################################
# SERVER LISTEN PORT : #
SERVER LISTEN PORT: 12000
ALLOW WEBINFO: yes
WEBINFO USERNAME: root
WEBINFO PASSWORD: *****
WEBINFO LISTEN PORT: 12000
#
DISABLE EMM: no
SHOW TIMING: yes
EMM THREADS : 4
EXTRA EMM LEVEL: yes
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE: /var/etc/CCcam.prio
PROVIDERINFO FILE: /var/etc/CCcam.providers
CHANNELINFO FILE: /var/etc/CCcam.channelinfo
#
CARD READER: /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
BOXKEY: /dev/sci0 ** ** ** **
AU = yes
#
CARD READER: /dev/sci1
BOXKEY: /dev/sci1 ** ** ** **
AU = yes
#
SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000
BOXKEY: /dev/ttyUSB0 ** ** ** **should I install CCcam 2.1.3
-
should I install CCcam 2.1.3
No, use CCcam 2.3.0.. Use the attached CCcam.cfg, it has all the unnecessary parts removed..
You will need to convert the serial number from beneath the receiver to get the boxkey.. Enter the BOXKEY like this:
You can also use oscam -> How-To: Oscam or Oscam & CCcam For SLY UK CAID 0963
-
Hi master G thanks for your time
apologies I should have explained myself correctly I have my box key already using CCcam 2.3.0 my zgemma 2s is up and running my problem now is I don't know what information to put where to set up sly share for family have setup port forward in router have also setup a account in no ip .if you could give me a example of what to put where Please also do I need anything else installed apart from CCcam.cfg .apologies for all the questions
- - - Updated - - -
all sorted master G thanks very much for all ur help
will my card auto update card entitlements ?
also is using CCcam the best option or could i try something else for best results no freeze etc- - - Updated - - -
does this look ok to you master G?
SERVER LISTEN PORT : 1****
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
WEBINFO LISTEN PORT : 16001
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
ZAP OSD TIME :0
OSD USERNAME :rootOSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yesDEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfoPROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.
Key
AUTOROLL FILE : /var/keys/AutoRoll.
Key
STATIC CW FILE : /var/keys/constant.cw#
#
BOXKEY: /dev/sci0 ** ** ** **
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3750000#
#
#
#
#
F: **** **** 1**** { 0:0:1 } { } { } ******.no-ip.biz
#HOME
#- - - Updated - - -
- - - Updated - - -
Hi master G
apologies for yet another question I would like to use Oscam what would be the best and quickest way to do this should I use this file enigma2-plugin-cams-oscam-9185_vti_all.ipk and also input the details from that page for Oscam Standalone -
hi I buy server and some one send me trial cccam reshare and he said he will help me and ask me what us ur SSH I don't know nothing what is SSH and how I found it I m new want to share cccam on Ubuntu can some one help me pkz thanks
-
hi I buy server and some one send me trial cccam reshare and he said he will help me and ask me what us ur SSH I don't know nothing what is SSH and how I found it I m new want to share cccam on Ubuntu can some one help me pkz thanks
We don`t support members who pay for gifts, services / use pay servers, you will need to find a different forum for that..
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!