hi everyone what is the best most upto date image for sly uk zgemma h1 thanks in advance
Sly uk
- superlarrson
- Thread is marked as Resolved.
There are 6 replies in this Thread which was already clicked 1,179 times. The last Post () by superlarrson.
-
-
Images are a matter of taste really, they all do pretty much the same thing.
If your looking for a skin similar to an original sly receiver, rossi's blue hd one is highly recommended.
It can normally be installed on the openatv image (not sure about a zgemma receiver though) which you can get from here (select airdigital).
http://linuxsat-support.com/view.php?pg=openatv
The skin can be installed from our addons panel here:
http://linuxsat-support.com/showthread.php?t=30475Other images are here:
http://linuxsat-support.com/forumdisplay.php?f=1149 -
Display More
Images are a matter of taste really, they all do pretty much the same thing.
If your looking for a skin similar to an original sly receiver, rossi's blue hd one is highly recommended.
It can be installed on the openatv image which you can get from here (select airdigital).
http://linuxsat-support.com/view.php?pg=openatv
The skin can be installed from our addons panel here:
http://linuxsat-support.com/showthread.php?t=30475Other images are here:
http://linuxsat-support.com/forumdisplay.php?f=1149cheers for replying il tell you what issue is i set up a zgemma open atv image and have tried 2 more i cant seem to get abm working to sort the channels in order tuner timeout signal is good and scans finds all channels but there all over the place cheers again
-
I'd try disabling one tuner and try abm again, but only guessing at this point.
I don't have any experience with these receivers to be honest. -
I'd try disabling one tuner and try abm again, but only guessing at this point.
I don't have any experience with these receivers to be honest.thanks for your suggestion i already done that its also got alot of channels from other providers which are greyed out
-
You could try updating your sat.xml file.
I've attached a current one for 28.2 (will remove all other satellites though)
Extract out and Ftp it to /etc/tuxbox/
Reboot receiver and try abm again (worth a shot)
I presume you have abm configured for 28.2? -
You could try updating your sat.xml file.
I've attached a current one for 28.2 (will remove all other satellites though)
Extract out and Ftp it to /etc/tuxbox/
Reboot receiver and try abm again (worth a shot)
I presume you have abm configured for 28.2?just upoaded file restarted box now have no channels : {
- - - Updated - - -
reflashed box got channels bk but for some reason abm still not working
-
master G
Moved the thread from forum ZGemma-Star Support to forum Zgemma Star series.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
