Posts by master G

That should be all there is to it, i`ve never tried it so let us know if it works for you.

01-08-2011

Glass System Utility v3.61
by shamann
ver. 3.61
- updated oscam bin to rev5751
- added OScam logo in OScam info
- added new option in UCM - set start cfg for OScam (debug, path to config files, etc...)
- fix Devices manager (mount path detection)
- removed partition number in mount path ("1" replaced "") for devices detected as sda and sdb - Devices manager

Note: before update, please, stop all cams and servers running via UCM

Description: allows you to automatically install ipk packages stored in the source dir (defined in setup, default: / media / hdd / autoinstall) after the start of E2 (may be allowed via setup, default: inactive), through the setup it is possible to view the current state of ipk files in the source dir, it is possible to immediately run the installation.
Applications: copy the required ipk (plugins, etc.) into the source dir, in the setup to allow autoinstall, after start plugin try installing new and unsuccessfully installed ipk packages
Note: the state before each installation and display the status is updated

note: plugin works on OE 1.6 images

:download:

Has this card got an update before in the DM500 with oscam ? Might be an idea to add the boxkey anyway just to be sure thats not the cause.

This will definately not stop the update buddy. Your config is the exact same as Oscam Sly UK Configs For Updating Entitlements.

update 31-07-2011

Dreamoem Toolbox v1

Tools List

SUNRAY-FlashUP
Drivers SUNRAY-FlashUP
DreamUP
DreamUP Patched
DCC_E2
Tunisiasat Dream player
DreamBoxEdit
Dream Logo Generator
Dream Capture
Enigma Signal Meter

:download:

Tring cards usually update on the 1st of every month, but there has been occasions where it needed an update before 3pm kickoffs. Put the card in the conax cam chip side facing up and leave it on tring sports for a minute (usually takes seconds) to get the update. If you dont have a conax cam use this Mgcamd config, How to : Mgcamd + Oscam Tring.

Not sure how often the card gets updated but you can use oscam or Mgcamd to get entitlements. Oscam Sly UK Configs For Updating Entitlements and How to : Mgcamd + Oscam s*y uk.

Which tuner version is your 800 mate?

I have just tested total football version 1.4 on a dm500 running gemini and found exactly the same problem as you described so the problem is with the plugin itself on that one.

When /var is full it will max the ram, not sure what else you can try maybe someone else has the answers.

This is his newest complete set included all of the following.
====================================

19.2 HD Stand: 25.07.2011
19.2 SD Stand: 25.07.2011
13,0 HD Stand: 05.07.2011
13,0 SD Stand: 05.07.2011
28,2 SD Stand: 20.06.2011
28,2 HD Stand: 18.06.2011
23,5 HD Stand: 25.07.2011
23,5 SD Stand 25.07.2011
4.8 HD Stand: 26.06.2011
4.8 SD Stand: 26.06.2011
9.0 HD Stand: 11.03.2011
9.0 SD Stand: 11.03.2011
7.0 W3A SD Stand: 13.05.2011
7.0 W3A HD Stand: 13.05.2011
Türksat 42 HD Stand: 04.06.2011
Türksat 42 SD Stand: 04.06.2011
0.8 HD Stand: 26.06.2011
0.8 SD Stand: 26.06.2011
NEU Hellas Sat 2 39e HD Stand 27.10.2010 thx an Spartacos
DVB C Kabeldeutschland HD Radio und TV Stand: 10.11.2010 thx digitalgodzilla
DVB C Kabeldeutschland SD Radio und TV Stand: 28.05.2010 thx digitalgodzilla
NEU Hispasat 30,W HD Stand 02.04.2010 thx charly1105
16.0 HD NEU Stand 14.02.2010 ohne Gewähr, wie lange das richtig ist! Danke an dragon7
16.0 SD NEU
NEU DVB C UnityMedia SD Radio und TV 07.01.2010 thx sternenfeuer alex
NEU DVB C UnityMedia HD Radio und TV 07.01.2010 thx sternenfeuer alex

:download:

You will have CCcam log in /tmp/warnings.txt and in /var/log, also check Oscam.conf to see if there is a path set for oscam.log.

Dm500 has a limited amount of ram/memory, so you could well have already maxxed out. Try uninstalling unused plugins and try again.

After you install Mgcamd1.35a look in folder /var/camscript or /usr/camscript, you will find the Mgcamd script. Edit it with the attached script, it will start Mgcamd then 15 seconds later oscam.

Quote from *** pirate

hi guys
my server runs with oscam, its a 500s clon and it works quiet fine.
but more and more it just stops working. i have to reboot the server by hand.
can`t go in with telnet either, if i am not at home its a hassle.

i am in spain, and it is hot, but there are more electronics in my studio and no problem. (overheating?)
there are so many things on oscam, is there something i can see what the crash causes?
anybody?
thanks m8s
el pirate:48_002:

Display More

There is not much memory on the 500, clear your log files and disable the logs in your config, i think your problem may be due to running out of space.

The script requires you to setup cron manager on dm500, I dont know how to do this. If you tell us what image you are using maybe someone else can help.

You could try using an updated oscam binary or adding a script that will check if oscam is running, if it has stopped the script will restart it again. Look here for the script, How to "Oscam check script"

When you download the latest oscam file it will be called something like oscam-svn5738-mips-tuxbox-webif-Distribution.tar, softcam manager wont recognise this file as it is thats why you need to rename it. Renaming it to "oscam" is just an example, you may rename it oscam.build if you want.