Posts by master G

Maybe its time we added an oscam section lol,
but seriously 2.14 came out in febuary and theres no word of anything else comming soon.I do think its time to look at the options available.

Just came across this to go with the video.

Is not mine, it was the hawk.
Major security hole in CCcam.
Card data at risk

Hallo, Hi,

same time advance for what I tell you now, I had to have a new account because I do something public, which is held out to me quite inexplicable reasons, non public.
Would I write it with my normal nick, so my time in various forums NP would have expired.
But since it concerns all Sharer, I do not see that this info is retained.

Now to the topic:
As some of you have noticed certainly support the CCcam is asleep. Seit Since the beginning of this year, there were no new versions and more are coming, probably no more.
Much more than the programmers a new business idea, which makes them ordendlich pockets full.

All CCcam versions of version 1.6.1 have a backdoor, which allows the server port to poll data.
Thus, for example the CCcam.cfg and data of the local maps, without which one is enabled in the config.
Also available to anyone who knows the IP and port.
The programmers have written for a tool that looks for specifying a dynamic IP or DNS address and the correct server listening port, a serial number of smart cards.
Delivered after the server has the data, the CCcam.cfg the server is searched for additional addresses and these are stripped of their card serial numbers.
The results can be on screen with track and write to a file.
Sun serial number, IP and date are recorded with time.

For those who are wondering what the ****** is, the well is clear that hereby can earn a lot of money.
The programmers provide the tool PayTV providers and providers of encryption systems to buy, so that they can actively seek Cardsharern who share their cards over the Internet without permission.

Confirmed that Irdeto has struck, and the News Corp..has recognized how valuable it is.The latter would be especially dangerous to us for German shares.

Sky Whether Germany is actively looking, I can not confirm, but Digit?rk already switched off for some time Deconstructed cards. This is discussed in many forums, but no one could explain how Digiturk has found these cards.
Naja, ihr wisst es nun. Well, you know it now.

Since reported recently from Germany to more frequent problems with CCcam, could this tool, especially in connection with the-n option (more on that) mentioned as a possible cause.

Since the NP scene has also come to this tool, we try to find just by capturing packets out how this tool is going on, but we have not yet come very far, as is encrypted, all traffic will and yet not a normal CCcam traffic can be distinguished.
Us is unfortunately the tool only in compiled form.

Frightening, is the already mentioned-n option, in which the Newcamd compounds, ie N: lines will be queried. This is already known for some time how easy it can be read serial numbers of the cards.
This will clear the CCcam restart and thus prolong the scan time and the share is disturbed.

The attached plugin enigma2-plugin-extensions-myvideo plays music videos and movies from the website h**p://www.myvideo.de.
The music videos play ok. Most films are not available in uk
The following categories are included :-

Top_100_Single_Chart 1-20
Top_100_Single_Chart 21-40
Films Comedy
Films Thriller
Films Horror
Films Action

:download:

Quote from grayboy

Could tell you what nlines are and mean
But I don't think you should use them in my honest opinion

Why should we not use them ?

# (23h17) Sky Digital: A new channel has started in DVB-S Clear: Olive TV (United Kingdom) on 11261.00MHz, pol.H SR:27500 FEC:2/3 SID:52104 PID:2313/2314 English.
# (22h38) Sky Digital: New frequency for Comedy Central Extra: 11307.00MHz, pol.H (DVB-S SR:27500 FEC:2/3 SID:52231 PID:2305/2306 English,2337 English- VideoGuard).
# (23h17) Sky Digital: Max.tv has left 11261.00MHz, pol.H (DVB-S SID:52104 PID:2313/2314 English), it is no longer transmitted by satellite in Europe.

* Astra 2A, 28.2?E
* (17h58) Sky Digital: Fox News has left 12226.00MHz, pol.H (DVB-S SID:5804 PID:517/645 English)

* Astra 2B, 28.2?E
* (17h51) Sky Digital: New frequency for Disney XD UK: 12110.00MHz, pol.H (DVB-S SR:27500 FEC:2/3 SID:6804 PID:514/642 English,662 English,672 English- VideoGuard).
* (17h52) Sky Digital: New frequency for ESPN: 12188.00MHz, pol.H (DVB-S SR:27500 FEC:2/3 SID:4644 PID:514/642 English- VideoGuard).
* (17h52) Sky Digital: New frequency for National Geographic Channel +1: 12304.00MHz, pol.H (DVB-S SR:27500 FEC:2/3 SID:4641 PID:518/646 English- VideoGuard).
* (17h53) Sky Digital: New frequency for Fox News: 12304.00MHz, pol.H (DVB-S SR:27500 FEC:2/3 SID:4643 PID:513/641 English- VideoGuard).
* (17h58) Sky Digital: National Geographic Channel +1 has left 12285.00MHz, pol.V (DVB-S SID:4608 PID:519/647 English)
* (17h58) Sky Digital: ESPN has left 12304.00MHz, pol.H (DVB-S SID:4241 PID:519/647 English)
* (17h58) Sky Digital: Disney XD UK has left 12304.00MHz, pol.H (DVB-S SID:9350 PID:517/645 English,665 English,685 English)

Also added Picons for *** UK (Base set from Picon4U) and the rest updated by myself

Use any FTP client, DCC for example, to transfer the picon directory
to one of the following paths on Flash, HDD, CF or USB respectively:

/usr/share/enigma2
NOT recommended, because of limited capacity of the flash memory

/media/hdd
HDD will keep running indefinitely and may affect image performance

/media/cf
Recommended if CF available and successfully mounted (8000/800)

/media/usb
Recommended if USB available and successfully mounted (8000/800)

Picon will display immediately on zapping, no further setup required!

Always remove old picons from Dreambox before uploading new ones, Sometimes they don't overwrite correctly

:download:

Quote from Ten Below

Just got a dm800 clone my self an am very impressed so far by the box, no glitching overheating and thus far the fan is still silent. Only complaint is poor range of the remote (2-3m) having searched i have seen this is a known problem so will be purchasing another remote, fingers crossed the box continues to perform as well as it has up till now. Hope i havent cursed it with this post lol.

Turns out the problem was not the remote but poor manufacturing due to the front panel not being trimmed when it come out the mould.Read more HERE

Programs Needed:
Dreambox FlashWizard (File Loader)
Dreambox Control Center DCC (Emu and other Files Loader)
DreamUp Universal (Image Loading)
Dream Edit (Channel Editing)

1. First follow these instructions
The first step is to find your IPs for PC and your receiver. For Windows XP go to start / run and type cmd and a black window is going to open where the line is blinking type ipconfig/all and press enter this is gonna bring all IPs. Write them down, you are going to need them (IP address for your PC) (net mask for dreambox) (default gate way for router) you have to verify the communication is set correctly go to tv, menu, scroll to the right and find the wrench or to gears press OK, go down to expert, press OK, select communication setup, press OK change the netmask to values you got from PC (the one you wrote down) and enter it exactly how it was, go down to name server and type your IP address (the one you got from PC) then go to gateway and type the same as name server make sure you have port 80 on the lower window on the upper bottom DHCP remove check mark, check enable network press green button to save and exit to main screen turn off receiver and unplug wait and plug it back in after all this go back to using dreambox control center program open it with the box connected through Cat5 cable only, under the dreambox option right below dreambox picture "search" press it and is going to give you some IPs for the box only, pick one double click on it to put it under dreambox window, write it down and go back to receiver, press menu, scroll to right, find wrench or gears /OK /expert setup/communication setup/ and enter the IP you save from under dreambox window "at dreambox control center" the one you just added under dreambox IP (last one you wrote down) and enter it on the very first option at the top "IP" press green button save /exit to main menu unplug and plug back in, close Dream Control Center and reopen it and check for the green lines if there all green it means you are connected however you're not using this program for the flash, it was just to check communication, now you need to open the FlashWizard program and load the image (wanted image followed by the Emu you want), press install a firmware is the first option on top, click drag & drop and find the file (or any working image fro dmb) you need to do this using a Cat5 cable (looks like a phone cable) it is going to ask if you are sure you want to load, press yes and wait about 5 minutes. After completed, reboot receiver and watch tv!!!!! Remember that my flash is going to install the IPs I am using on my setup so once you get my flash on your box you have to re-enter the IPs you had before you uploaded my flash or you wont be able to send anything else to the box.

If your receiver has a rolling screen this is because it is setup using a PAL Image (European) to stop it just press right arrow on remote until you see it stop (NTSC) save and exit.

2. Make sure receiver is unplugged. Here you are going to load your image using DreamUp Universal, double click on DreamUp and a window will open then click connect and wait for the message box is alive and speaking to us, click on flash and select the image wanted (ex. dsmremaster beta2...) double click on it if you're prompted OK press OK or just press install then wait for about 5 to 9 minutes to load image.

3. Connect receiver to TV. Enter the IPs you got from the first step double check DCC AFTER YOU CHANGE IPs to make sure your communication settings are correct! very important or you wont go any further!! the first IP is the receiver's IP, netmask is the same as you got from PC. name server(your PC IPs) gateway the same IP as server. Press green button and exit.

4. Open DCC AND MAKE SURE ALL LINES ARE GREEN if not you're settings are wrong so go back and play with it!!!

5. If you got it going, load a sat file which has all american sats, in the file section (if you are using dishpro LNB you must use a DP channel list if you're using legacy LNB you must use a legacy channel list) open dreamedit program and click on open folder and find channel list to be loaded, double click and press ok then press ftp on program and a secondary window will open press send to dreambox wait and press reload tab wait until is ready 2 or 3 seconds by this time the channel list is in your box this installs the sat automatically..

6. Now make your antenna settings go to tv/receiver/menu/setup/OK/service searching/satellite config/if a disecqc is being used and 2 sats select 2satellites via DiSEqC A/B/press green button on remote to save/select #1 sat 119 and 110 or whichever sats your are using(am going for the most common sats and settings) once you select the sats press/green to save,go back up and go into the sats again and select standard north america config/and you will see the sats you selected make sure the lnbs settings are correct 119 LNB 0=(to port 1 on db 0 is equal to port 1) 110 lnb1 = to port 2 22hrtz hi/lo on both voltage h/v on both also now highlight lnb0 and press enter under LOF?HV make sure is 11250 and LNB is 0 then press blue button and check (tone burst none) (DiSEqC mode version 1.0) (DiSEqC parameter A/A) press green button to save and do the same for 110 but remember the LNB will change to 1 and DiSEqC parameter will be A/B after this you're ready to start loading your emu. before you continue check the signal this will tell you if the settings are correct..

7. Open DCC and press FTP

8. Double click on TMP folder a window will open, on your right you need to look for the emu currently working(opencamd 1.3.0.tar.gz) if is zipped(compressed) you need to decompress it, you may get either a folder or a file ending on opencamd1.3.0.tar.gz (this is how you want it) if is a folder go in the folder and find it in the if it looks unzipped but it has the extension tar.gz that is fine!! Highlight it and press the arrow in the middle to transfer it to your receiver.

9. Once is transferred right click it and select attributes/OK/755/OK/save and exit

10. Then go to main window again and find the keys folder
double click it and check to see if you have a file name Keylist.txt and Autoupdate.Key if you don't you need to load them

11. This is how to load them, go to the right of the window and find the file downloaded from the site , highlight and press arrow to transfer then select file transferred and right click/select attributes select 755 press OK and exit

12. Now the rest is done using the remote control, press green button select manual addons ,select emu and press green to install save and exit to main window "TV. screen"

13. Press blue button to make sure the emu you just installed is activated if it's not you will see it, just press arrow on remote to the right or left and find it, once you find it press blue button again to activate it, if it doesn't stay in that window go to tv and set receiver to a channel for example ppv 505 and let it sit there and redo this whole step 13 again once you get it to stay there you're ready to go save exit and let the keys roll for about a minute may be a little more and the picture should pop right in!

Credit for this to original author jk007

Here is how:

1- Press TV button on your dream remote
2- Press on SHIFT/Set-up button for 3 seconds and TV button will blink twice
3- Enter the suitable code that match your TV
4- When u finish the remote will be ready to use for both Dreambox and the Tv

If u want to use the remote for the Dreambox just press the Dream button and to use it for Tv press the Tv button

:download:

I posted yesterday about the poor performance of the remote for my dm800 pvr clone remote.Today i programmed the remote to operate the tv and noticed it had no problems controling the tv from the other side of the room so decided to take a look at the ir inside the box and found the problem.
What i found was a flap of black plastic behind the ir window covering 90% of the sensor.This was part of the front panel plastic so basically the panel had not been trimmed of excess plastic when it came out the mould.I removed the excess plastic and put everything back together and the remote is now functioning as it should.
Beer1

I hope this helps somebody in the future as i was ready to spend money on an original remote which would not have performed any better.

Just got a dm800 clone my self an am very impressed so far by the box, no glitching overheating and thus far the fan is still silent. Only complaint is poor range of the remote (2-3m) having searched i have seen this is a known problem so will be purchasing another remote, fingers crossed the box continues to perform as well as it has up till now. Hope i havent cursed it with this post lol.

Seen this on another board, I think somebody was bored so thought this up ( some people do strange things ), also the version of cccam this is claimed to be on was released in 2007. I cannot believe this has taken until now to surface.

You will need to load the settings to your box using dreamset or dreambox edit, you will find the B16MCC files in the e2 settings section here.

Some of you may find this useful, full details HERE

Dial 0118 352 0800
Enter the 0800, 0808, or 0500 number you want to phone
Press # to start the call

Can I still use your service if I don’t get free minutes to UK landlines?

Our access numbers should be charged at the normal landline rate, which might still be cheaper than calling 0800, 0808 or 0500 number direct. Check your mobile tariff to see if we could still save you money.

What’s the catch? How does 0800Buster.co.uk earn any money?

We can offer this to you as a free service because we receive a small amount of money for handling toll free calls.

How can I store your numbers in my phone’s address book?

Most mobiles come with the ability to add “pauses” to contacts which cause the phone to wait for 2–3 seconds before dialling the rest of the number. These are usually represented by a “p” or “+” so the number you store should resemble 01183520800p0800123456#. To enter a pause:
Nokia - press three times (or until p appears)
Samsung, Motorola - press and hold until p appears
Sony Ericsson - press and hold until p appears
LG - press and hold until p appears
Siemens - press and hold until + appears
Apple iPhone - press and hold until , appears

Can I use your service to call 0845, 0870, or other UK numbers?

Unfortunately it would cost us money to handle these calls so we cannot offer it as part of our free service. You can, however, use our parent company Localphone.com to make cheap calls to the UK which should work out considerably cheaper than using your mobile directly.

What are some useful numbers I can call with 0800Buster?

You can get free directory enquiries from your mobile by dialling the 0800Buster access number, followed by 0800 118 3733.

Translated with google translate

1.35a CCcam 2.14 and Mgcamd also used with this backup.
Emu channels were opened with the OK!
With mgcamd 1.35a * 13 Orange (turn on all of), 13 RAI 1-2-3-4,
39 Bulsatcom OK ...

Stage of the test published in the DM500 nemesis for the people of this image i
Opening the official image for you, even though there editledim.Orjinal functioned properly.
I ran to change this too, adding to You EasyLogo
opportunity provided. (bootlgo bootlogo original image is in)
Despite the image that you are familiar with the ECM infoyu addons
I added part at main menu

This is optional as backupda:

* Shared channels; You have server information - keys file cccam.list
file type, there-etc within the mgcamd watch it on the server by deleting bilgilerinizide .*
Only (mg.cfg file is set as the G line 33).
But always make a backup copy before you delete the cfg file server information.

** Available in English and Turkish languages ...
(Other languages can be downloaded addonsdan)

** 2 x bootlogo used.
2. can be changed with bootlogo EasyLogo.

** Skin Kulanılmıştır the X-line 2.

** Mgcamd 1.35a integrated.

** Integrated with CCcam 2.1.4.

** CCcam info 1.1 integrated.

** Ecminfo integrated.

** EasyLogo 1.2 integrated.

** Extra URL added

** Teletext (own key) is available.

--- Image has been tested and given to the forum.
--- However, the responsibility belongs downloaded.
--- SMF does not accept responsibility.

** Before installing your backup should seek ...

** After installation, there Cccam.cfg backup / etc get out of
Make your adjustments need to install the LNB and channel list.

Download

If you are ever looking for some foreign channels to watch let us know ;)

Exellent post, thanks for this, im sure this will help a few who are just starting.

Put them in our conspiracy section lol

# Enigma is of 11.11.2010
# the plugins are of 11.11.2010
# the drivers are of 11.11.2010
# new kernel 2.6.18-r6.1
# secondstage is 76
# changes at Enigma? can be pursued HERE

# my changes at oe:

# own bootlogo's, artwork by clumsy and BVB01
# with satellites.xml - enigma? by Reinh@rd
# changes of dccamd start
# dccamd not included in image, can be installed via plugin download

# (*) included
# (**) only via plugin-download available

# systemplugins:

# automatictimerlistcleanup (**)
# automaticvolumeadjustment (**)
# autoresolution (**)
# cleanupwizard (**)
# crashlogautosubmit (**)
# crossepg (**)
# defaultservicesscanner (**)
# diseqctester (**)
# dvbtime (**)
# hotplug (*)
# ledmanager (**)
# networkbrowser (*)
# networkwizard (*)
# positionersetup (*)
# satelliteequipmentcontrol (**)
# satfinder (*)
# setpasswd (**)
# skinselector (*)
# softwaremanager (*)
# startupservice (**)
# videoenhancement (**)
# videomode (*)
# videotune (*)
# wirelesslan (**)

# plugins:

# aihdcontroller (**)
# ambx (**)
# antiscrollbar (**)
# appletrailer (**)
# audiosync (*)
# autotimer (**)
# autotimeshift (**)
# b00k (**)
# babelzapper (**)
# barryallen (**)
# bartallen (**)
# blockcontent (**)
# bonjour (**)
# buliticker (**)
# bwmon (**)
# captain-shell (**)
# cdinfo (**)
# cooltvguide (**)
# covermanager (**)
# cronmanager (**)
# cutlisteditor (**)
# cvsnews (**)
# dccamd (**)
# dflash (*)
# djmount (**)
# dmvidsdirect (**)
# dreamexplorer (**)
# dreamirc (**)
# dvdbackup (**)
# dvdburn (**)
# dvdcontroller (**)
# dvdplayer (**)
# dyndns (**)
# easymedia (**)
# emailclient (**)
# epgrefresh (*)
# epgsearch (**)
# extendedserviceinfo (**)
# fantastic (**)
# filebrowser (**)
# flashcheck (**)
# freeze (**)
# fritzcall (**)
# ftpbrowser (**)
# genuinedreambox (*)
# googlemaps (**)
# gp2flashbackup (**)
# graphmultiepg (*)
# growlee (**)
# hddtemp (**)
# hdmon (**)
# housekeeping (**)
# httpproxy (**)
# imdb (*)
# iprec (**)
# kiddytimer (**)
# lastfm (*)
# lcdskin (**)
# ledctl (**)
# letterbox (**)
# livescore (**)
# logomanager (**)
# lottoextended (**)
# lottozahlen (**)
# mediacenter (**)
# mediadownloader (**)
# mediaplayer (*)
# mediascanner (*)
# merlinepg (**)
# merlinepgsearch (**)
# merlinmusicplayer (*)
# metacafedirect (*)
# meteoitalia (**)
# modem (*)
# mosaic (**)
# mountie (**)
# mountie-light (**)
# moviecut (*)
# moviejukebox (**)
# movielistpreview (**)
# movieplayer (**)
# movieretitle (*)
# movieselectionquickbutton (**)
# movie-splitter (**)
# movietagger (*)
# multquickbutton (**)
# multirc (**)
# mytube (**)
# netcaster (**)
# nfsserver (*)
# ofdb (*)
# off (**)
# openpanel (**)
# orfat (**)
# orfteletext (**)
# partnerbox (**)
# passwordchanger (**)
# pauli (**)
# permanentclock (**)
# permanentrecording (**)
# permanenttimeshift (**)
# pictureplayer (*)
# pluginlist (**)
# podcast (**)
# puremp3player (**)
# pzyemail (**)
# quickbutton (**)
# quicktv (**)
# reconstructapsc (**)
# remotetimer (**)
# remotetv (**)
# rsdownloader (**)
# sambaserver (*)
# screensaver (**)
# secondinfobar (**)
# seekbar (**)
# sherlock (**)
# shoutcast (*)
# simplerss (**)
# smargo (**)
# socketmmi (**)
# spinnerselektor (**)
# sportinfos (**)
# startuptostandby (**)
# suduko (**)
# suomipoeka (**)
# swapscript (**)
# tageditor (*)
# timeshiftsave (**)
# timeupdate (**)
# trafficinfo (**)
# translator (**)
# tuxcom (**)
# tuxcom (**)
# tversity (**)
# unwetterinfo (**)
# updatecheck (*)
# upnp (**)
# userscripts (*)
# ushare (**)
# valixdcontrol (**)
# virtualzap (**)
# vlcplayer (**)
# wallywest (**)
# wetherplugin (**)
# wethersat (**)
# webbrowser (**)
# webcamviewer (**)
# webinterface (*)
# webradiofs (**)
# werbezapper (**)
# xmltvimport (**)
# youtubeplayer (**)
# zaphistorybrowser (**)
# zapstatistic (**)
# zdfmediathek (**)

# Skins:

# basic hd (**)
# blackbox (**)
# blueline (**)
# blueline.extended (**)
# blueline.single (**)
# brushed alu hd (**)
# chromeline (**)
# chromeline.cobolt (**)
# dmconcinnity-hd (**)
# dmm-hd (**)
# dreammm-hd (**)
# dreamtv-hd (**)
# dtv-hd (**)
# dtv-hd-reloaded (**)
# elgato-hd (**)
# flatline (**)
# flatline.blue (**)
# glassline (**)
# greenline (**)
# greenline.extended (**)
# greenline.single (**)
# greyline (**)
# greyline.extended (**)
# greyline.single (**)
# kerni-hd1 (**)
# kerni-hd1r2 (**)
# lt6-hd (**)
# shadowline (**)
# simple (**)
# swain (**)
# swain.hd (*)
# ultraviolet (**)
# vali-hd (**)
# vali-xd (**)
# yads-hd (**)
# picon 01.0e 3d hd (**)
# picon 04.0e 3d (**)
# picon 04.8e 3d hd (**)
# picon 07.0e 3d (**)
# picon 07.0e 3d hd (**)
# picon 09.0e 3d (**)
# picon 09.0e 3d hd (**)
# picon 13.0e 3d (**)
# picon 13.0e 3d hd (**)
# picon 16.0e 3d (**)
# picon 16.0e 3d hd (**)
# picon 19.0e 3d (**)
# picon 19.2e 3d hd (**)
# picon 23.5e 3d (**)
# picon 23.5e 3d hd (**)
# picon 28.2e 3d (**)
# picon 28.2e 3d hd (**)
# picon 39.0e 3d (**)
# picon 39.0e 3d hd (**)
# picon 42.0e 3d (**)
# picon 42.0e 3d hd (**)
# picon kd.3d (**)
# picon kd.3d.hd (**)
# picon um.3d (**)
# picon um 3d hd (**)

# my changes at enigma:

# MHW epg active
# load patch for crossepg
# bouquet button patch
# .recordings patch
# authenticity certificate check (by Dr.Best) <- this image will only work on original dmm hardware!

# this image is updateble via plugins -> softwareupdate over internet!

# OE Build Configuration:

# BB_VERSION = "1.8-dream"
# TARGET_ARCH = "mipsel"
# TARGET_OS = "linux"
# MACHINE = "dm800"
# DISTRO = "opendreambox"
# DISTRO_VERSION = "1.6.0"
# TARGET_FPU = "soft"

:download:

Working on gaz sky box office ha for me