I did what you told me in post #9
Try to install it again in telnet with the command above then show us the output.
I did what you told me in post #9
Try to install it again in telnet with the command above then show us the output.
I can't get the picon lcd every day I don't know what the exact size
LCD4Linux has its own webinterface where everything can be configured.
Paste this into a browser ~ http://192.168.1.92/lcd4linux/config/ (192.168.1.92 is the ip address of the dm900)
Is they a version of Ncam we can use for Icam channels
Only for Sky DE ~ Ncam Emu compiled and patched by RAED
same problem as in the post the LCD4Linux plug-in does not appear in the plug-in menu
Follow post #9.
Permission denied
The ncam binary doesn`t have 755 permissions.
I think that the architecture for this device is different.
It has a MIPS processor, so use the mipsel - mips32el binary file or the ipk from the link below.
after carrying out an available update, this function no longer works...
For now revert back to the previous version of OpenBH. Anything else not related to the original topic (EPG, LCD Picons) should be posted in another thread.
The old VU+ models are well known to have issues with certain USB sticks. Its recommended you try with a different USB stick or use a formatting tool.
Article
How To Flash A VU+ ZERO Linux Enigma2 Satellite Receiver
Flashing the Receiver
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised if possible.
4) Power the receiver on.
5) The WHITE L.E.D will quickly flash two or three times then start to fade in and out slowly.
6) Once completed the WHITE L.E.D will flash rapidly.
7) If in doubt leave the receiver for a full 10 minutes…
Sometimes it works for some seconds then it freezes.
Look at the Live log in the NCam webinterface.
If you see "not found" and "timeout" errors with a high ECM time on the ICAM channels, then you have a poor provider.
What do you mean by "make channel settings, for ICAM_DE" ?
You need a custom stream relay channel list to view ICAM channels.
how should I configure my reader in ncam.server to make sky deutschland work ?
There is no special configuration on the reader for Sky DE. Its configured exactly the same way as any other package.
Use the configs provided on the first post.
You posted in the thread already ~ BlackHole 9.x DM 920 UHD
I didn't mean to disrespect ANYONE
If you can`t provide the crash log requested already by Abu baniaz you won`t get resolution to the problem.
I just read your last post on the other thread and seen you are using OpenViX.
In that case the oscam binary should be in /usr/softcams not /usr/bin
It still doesn't appear:
Why did you name the oscam binary oscam -b
I said use the command in Telnet.
For IT and GB right ??
No only DE
Try starting oscam in telnet with /usr/bin/oscam -b
If the image is missing something it will throw out an error.
Can anyone tell me the correct an quickest way to install this?
How were you trying to install it?
Its only a binary, so you need to manually overwrite the existing oscam file using an FTP tool. Give the correct 755 permissions and rename the oscam to the same as the existing version so the softcam manager can start it.
so the colleagues from the streamboard forum could request it and then it should be given to them.
Or he could just stop compiling oscam and use ncam instead, then he doesn`t need to give them anything.
Forcing people to do things they don`t want to do doesn`t always have the outcome you might expect.
Hallo,
how to expand the source from ICAM to UK ?
thanks
Everything you need is in the first post of this thread or the thread below.