Posts by siri_uk

Thanks for the reply, only here for another month will take your advice and do it when i get back

Hi guys

I'm in India at the moment, have webmin installed on the server in UK, webmin is showing 3 updates, base system files, bash update and linux-image 3.2.0-4-686-pae update to 3.2.35-2. Is it ok to run the system update whilst i'm not in UK as i dont want the server to mess up. Will the update just unpack and update the system files or will i need to input things as per original setup?

TIA

Sorry for the mistake I misunderstood the meaning the people connected to me are clients then, there is no share back, no cacheex setup, just a basic server also card gets updated in official receiver about 10 days before entitlements end

I'm running debian wheezy, oscam updated to latest version with omnikey, no whitelist active, 0963 card, small family n friends server with about 13 people on. I'm in India at the moment and monitor the server when I get up find that between 4 and 9 am UK time the server has ecm times between 500 and 700 then settles, times are still high for some peers but are around 250 ms until early hours day after.

Seems like they're using 70 now if u add it to the whitelist should be fine

Hi guys

I'm running oscam, trying to figure out how to get a debug log as the later versions of oscam don't work for me, anyone advise how to setup debugging

TIA

thanks for the reply, any ideas which is the most stable version of 1.20 to use

Hi

I'm currently using oscam to read my card (0963), been using it for a while, since yesterday rev 7311, 12 & 13, been getting these errors

2012/09/01 13:55:59 0 s waiting for local card init
2012/09/01 13:55:59 A4000D70 r ***_uk [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2012/09/01 13:56:00 A4000D70 r ***_uk [pcsc] card detected
2012/09/01 13:56:01 A4000D70 r ***_uk [pcsc] ATR: ********************************
2012/09/01 13:56:02 A4000D70 r ***_uk [pcsc] Card type: SYAV
2012/09/01 13:56:02 A4000D70 r ***_uk [pcsc] Rom version: 40LF
2012/09/01 13:56:02 A4000D70 r ***_uk [pcsc] no boxID available
2012/09/01 13:56:02 A4000D70 r ***_uk [pcsc] card system not supported
2012/09/01 13:56:02 A4000D70 r ***_uk [pcsc] Normal mode failed, reverting to Deprecated Mode
2012/09/01 13:56:02 A4000D70 r ***_uk [pcsc] ATR: ******************************
2012/09/01 13:56:03 A4000D70 r ***_uk [pcsc] Card type: SYAV
2012/09/01 13:56:03 A4000D70 r ***_uk [pcsc] Rom version: 40LF
2012/09/01 13:56:03 A4000D70 r ***_uk [pcsc] no boxID available
2012/09/01 13:56:03 A4000D70 r ***_uk [pcsc] card system not supported
2012/09/01 13:56:03 A4000D70 r ***_uk [pcsc] card initializing error
2012/09/01 13:56:04 0 s init for all local cards done

If I revert to 1.10 or earlier versions of 1.20 the card works fine, anyone any ideas

TIA

thanks for the replies, these are the configs i'm using

[reader]
label = omnikey
protocol = pcsc
device = 0
caid = 0963
ecmwhitelist = 0963:3E,4E,4F,42,44,45,47,53,54,56,61,6A,6B,6D,6E,6F,62,67,68,69,7A,7C,7D,7E,71,72,73,77,78,79,80,8B
detect = cd
mhz = 357
cardmhz = 357
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 183,81
blocknano = all

[global]
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
cwlogdir = /var/log/oscam/cw
clienttimeout = 7500
failbantime = 1440
nice = -1
maxlogsize = 4096
saveinithistory = 1
dropdups = 1
lb_mode = 1
keepalive = 1

[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 0

[newcamd]
port = *****
key = *****

[cccam]
port = *****
reshare = 0
ignorereshare = 1
version = 2.1.4
stealth = 1

[webif]
httpport = *****
httpuser = *****
httppwd = *****
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.2.4
httpdyndns =
httphideidleclients = 1

[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log
denysamples = 4

I have expanded to fill the sdcard but not done the memory split will try that also

Hi guys

I'm running oscam on a raspberry pi, it's currently running off a 16 gb class 4 microsd card in an adapter. The card is read by omnikey 3121 connected directly to the usb of the raspberry, every 20 seconds or so I get glitching and freezing with an high reading of 500+ms, it doesn't do this all the time, there are only a few family on it, it seems to be when it's under load, like when the football is on, is the raspberry ok for cardshare or should I stick with debian on pc

TIA

Tried the distribution file still the same, just put in var/bin the same location as my 1.10 file renamed to oscam.x86 to match other file but get nothing, webif will not connect and oscam doesn't start as soon as I put the 1.10 file back everything is ok can't understand it

Quote from Ten Below

Have you tried downloading the latest version rather than compiling it yourself?

thanks will give it a try

Hi guys

I'm currently running Oscam 1.10rc svn build #6089 on debian 6/amd64, I have tried updating to latest 1.20 but it seems that oscam will not load, i have done a manual compile with webif, everything installs ok, anyone any ideas

TIA

Hi

I am currently running oscam on a debian server, is it better to stick to oscam or would it be better to update to cccam 2.30

Any thoughts

TIA