Hi guys, sorry for the silence, changed Vix Image to the Non HD and yes I can confirm TSMedia 7.95 works like the good old times.
Though am still hoping I can use the Vix HD Image with all my favourite Plugins, but guess I have to wait till the Plugin Author gets a chance to fix the Plugin to work on Vix HD Images.
All in all, its a beautiful plugin.
Guys thanks for the advice, I can confirm its the HD version am using. So will need to install the non HD Version and will get back to you all.
But, whats the difference and use of HD if its not working with some plugins? And what can I do, any fixes for it to work on HD Vers.?
Thanks anyway guys....Much appreciated.
I have uninstalled it and re-installed it like 5 times, done a fresh install of the image and didn't restore my settings so it was a clean image install.
Also tried an earlier version V6.9 ..that too failed and opened up like the above 7.95 version.
Hi Guys, am looking for some help after updating to the latest TSmedia 7.95, am also on the latest Vix Image Apollo -077 Kernel 3.13.5.
Now my my problem, the TSmedia panel will only open to the top left of the screen, also the text is very small. See Screen grabs below. Any idea what i can do or is this a TSmedia issue, and should sit back and wait for them to fix?? Please advise.linuxsat-support.com/cms/attachment/28356/
Sorry guys..been quite as I have been moving hse. So no internet at the momment ..having to connect via Phone Hotspot.
OK..back to the issue, as abu baniaz, says, it could be an issue while at the 1st setup of the box you chose the Satellite automatically rather than chose it manually as in Astra 28.2E for me for Sly Uk & Ireland.
But, having chosen this manually, I still find the same problem continues, and am left at with the conclusion that it might a Software issue with the latest Build 808, and not the Tuners themselves.
If guys will remember back please....before 3.0 808 Version...CrossEPG worked...but it just suddenly stopped. I am pretty sure about this, but am welcome to correction guys.
THANKS, and am happy guys a getting a Temporary resolution. Coz, once you update and restart the Tuner, after a few days CrossEPG Downloader will fail again. Then you have to start all over again, disabling the tuner and do it again.
Hi guys, as usual I have a weird issue I need help with, I have a Vu+ Duoe 2 Vix Image 3.0 Version 808, with 2 Tuners set to Simple on 28.2E
Problem:-
My Crossepg wont update unless I disable 1 Tuner, then update manually. Which works ok. But if both A or B are on then it fails to update.
Before anyone says its the Tuner failing, can I say, they both work ok. Why, coz if I disable Tuner A, EPG loads with Tuner B. If I disable Tuner B, and leave A on...Then it loads epg ok.
But if bot are set to on, then it fails, after numerous checks with a member here, it showed that it sometimes loads with both, and sometimes doesn't with either or tuner.
I have TSMedia and TSPanel, on, though am not sure this is the issue, coz even after fresh install, I still have the same issue.
Any help anyone.
Right, after the weekend and very many hours if troubleshooting and all kinds of uninstalling and re-installing image (vix image 3.0) as well as plugins (crossepg) and everything under the sun. With the generous help of abu baniaz and I troubleshooted the tuner image and stripped it to the bare minimum...after 2hrs we came to the realization that my CrossEPG was not working becoz, during setup I Automatically picked Astra 28.2E and not Manually Added them for my 2 Tuners.
Trust me that sounds weid and had to believe, but with the troubleshooting, and disabling 1 Tuner after another. As well as Manually choosing Satellite and not Automatically, it FINALLY WORKED. Thank God for that..and has since worked everynight at 4am.
Thank you abu baniaz for all the help...much appreciated...Cheers.:78::36_002::thumbsup:
brendanj9554 now that is some serious work right there....Am jealous. Really good work ...and like the idea of the tank and the tv above..been a dream of mine for a while to have something like that.
Good work, would like to see the room when fully done. And don't forget to hide all the wires, and put some cool lighting around also.
warhead1999 - My CCline is active as am able to watch all channels, free as well as paid like all Sly Channels. So am sure its live and working as it should.
abu baniaz - I don't have any dead channels, and all channels HD and normal are working ok....And thanks for the info on the AutoBouquetsMaker, didn't want to use it from the get go...as it adds bouquets to my well designed Bouquet, so am happy that you've said it's not a must.
Ten Below - I have also killed enigma and deleted my EPG.dat file which is in my HDD </media/hdd>, where I have set epg to store data, not sure if there is another location for the epg.dat file....please let me know...
Are you sure your channel list is up to date?
I reinstalled Vix Image and when I did I rescanned the Astray 28.2 and said clear before scanning....then loaded my own saved Bouquets style...but still nothing.
Am sure there is a very simple solution to this, I but, am not getting this. Only question is, is Auto Bouquets Maker a must, inorder for CrossEPG to work? From the Setup guide its the only thing I don't have installed. Cox I like my Sly Bouquets style....could this be an issue...
Guys thanks for all your support..managed to Telnet and delete epg.dat file on /media/hdd as well as one I saw in /etc/enigma2...then ran the CrossEPG, but still No Luck. Even after uninstalling and installing CrossEPG
I re-installed Vix Image again afresh, when through the settings, and this time set up again according to the guide posted above on the pdf.....same issue..not populating epg for 7days. BUT...I have 7day EPG for FreeSAT channels but not pay channels like Sly 1.
So there u have it..3am and nowhere closer to the resolution.
Any ideas....
By the way Quick Question ...when ur box is updating EPG does it change channel to a Radio Station? Coz mine doesn't stays on the same channel I was watching. Even though I have a twin tuner.
Is that right, on the PDF it says it should change to a Radio Station to update the EPG??? Maybe that's why it wont update? And yest both tuners are on 28.2
Guys...trust me I have tried it all and read and done everything on the above PDF enough times but still to no avail.
Dealing with boxes has never been an issue for me...but the crossepg....is proving to be difficult...hence the screenshots...so that you see my settings.
Hi ALL, I have a Vu+ Duo2 on
Vix Image Version 3.0
Build 808
Kernel 3.3.8
1TB HDD Mounted
For as long as I have had this box, I have never quite got the CrossEPG to work Flawlessly by itself for more than 2 weeks straight. There was a time I managed to update and have the whole 7days...but after an update I losts all EPG, and now get only Now and Next EPG.
I have read and re-read the "How to setup CrossEPG" PDF a hundred times. Deleted and re-installed CrossEPG and gone through the settings again and again, but to no joy. Now am asking for help. Please can someone advise me step by step where am going wrong...
Included is all the Screenshots, I have on EPG ...maybe you might notice my silly mistake....
Thanks in advance..
e5ea7e5cbc0e7597c843.jpgac1da76106fd9dab23cdc6b20.jpgf72cfffeeee7b02c.jpg9e3ec82c8f273c9e8f.jpg88a62f79b.jpga8943128.jpg8e080.jpgc0accbe4e92a4dc3.jpg189c29b13a.jpg1249e0102bd96a68.jpg1249e0102bd96a68.jpg
