Hi guys
I'm using oscam 7054 on dreambox with about 25 connected to this server,but now it's glitching an scrambling a lot.
It works fine if I kill 5 connections.
So guys is there anything I can do to address this issue???
Thanks
Hi guys
I'm using oscam 7054 on dreambox with about 25 connected to this server,but now it's glitching an scrambling a lot.
It works fine if I kill 5 connections.
So guys is there anything I can do to address this issue???
Thanks
if it took 12 hours then thats how long it took them to send it for some reason or other good stuff
stevejo mate are my settings correct?? cos meerkat stated that there in a mess lol
thanks
mate as you say my reader is a mess how can I correct it???
plus my update came through after 12hrs without doing thing..
here is my reader an user settings so could u pls tell what I need to change????
[reader]
label = ***uk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
[account]
user = ****r
pwd = *****
group = 1
monlevel = 4
au = slyuk
caid = 0963
keepalive = 1
thanks
No ident?
also no account/user information...
No ident?
also no account/user information...
could you pls explain in more detail pls
There should be no tweaking required buddy if you update ok in oscam you should get the entitlement fine ,you may neew to phone and check and if you have multiroom make sure its not been sent to the wrong box wont be the first time those muppets have done that
I meant I had issues before so that's why tweaked config, I did ring em an gave card details again an was told signal being now which was few hours ago but still same issue
Did you see emm arrive ? have you got the new entitlement?try also remove ecm whitelist seems a few peeps still use them personally i dont see the point
nah mate entitlement isn't showing yet plus im not using whitelist.
but done manu tv few wks bk an that came through fine after tweaking the config..
thanks
Hi guys just a quick question regarding cw rate in oscam
i got 1 peer whos cw rate is showing as 86.58 (1819.90) is that normal or hes upto no good??
Thanks in advance
is there any way you can tell how you got it sorted so you may help others
thank you busman
Yes mate my reader details were incorrect
Just done them settings
Still not clearing???
Thanks
in oscam log I get this
2014/01/29 17:53:53 1027D3E8 c dvbapiuser (0963&000000/0000/C4A9/5F:9C42): not found (1 ms) by slyuk - 0963:C4A9 unknown
2014/01/29 17:53:53 1027D3E8 c dvbapi: try pids again #3
2014/01/29 17:53:53 1027D3E8 c dvbapi: can't decode channel
ok buddy im using oscam 7054 through dream 500 setup an here my file etc
oscam config
[global]
serverip =
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /opt/oscam/cw
nice = -1
preferlocalcards = 1
saveinithistory = 1
[monitor]
port = 988
nocrypt = 127.0.0.1
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 1
[cccam]
port = *****
reshare = 1
version = 2.3.0
stealth = 1
reshare_mode = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiuser
[newcamd]
port = *****@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
Display More
oscam user
[account]
user = dvbapiuser
pwd = ******
group = 1
monlevel = 4
keepalive = 1
[account]
user = ******
pwd = ****
group = 1
keepalive = 1
Display More
oscam server
[reader]
label = slyuk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blocknano = all
Display More
oscam dvbapi
#
# dvbapi configuration
#
# format:
#
# priority:
# P: CAID[:][provider ID][:][service ID][:][ECM PID] [continue]
#
# ignore:
# I: CAID[:][provider ID][:][service ID][:][ECM PID]
#
# wait:
# D: CAID[:][provider ID][:][service ID][:][ECM PID] delay
#
# map:
# M: CAID[:][provider ID][:][service ID][:][ECM PID] target CAID[:][target provider ID]
#
# lenght:
# L: CAID[:][provider ID][:][service ID][:][ECM PID] length
#
P: 0963:000000 # prioritise CAID 0100 with provider 123456
#P: :000000 # prioritise ECM with provider ID 1234 on
# on any CAID and service
#P: 0100 # prioritise CAID 0200
#P: 0300::9ABC # prioritise CAID 0300 on service 9ABC only
#M: 0400 0500:123456 # map CAID 0400 to provider ID 123456 with
# CAID 0500
#D: 0600 200 # wait 200 ms before writing CW for CAID 0600
#I: :654321 # ignore provider ID 654321 for every CAID and
# service
#I: 0 # ignore every CAID that was not handled before
#L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal)
Display More
oscam log
2014/01/29 07:20:31 10263198 c ***** (0963&000000/0000/C5E5/68:4AE9): cache2 (26 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:20:31 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7054 (powerpc-tuxbox-linux)
2014/01/29 07:20:31 0 version=1.20-unstable_svn, build #7054, system=powerpc-tuxbox-linux, nice=-1
2014/01/29 07:20:31 0 client max. idle=120 sec, debug level=0
2014/01/29 07:20:31 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2014/01/29 07:20:31 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/01/29 07:20:32 102**** c dvbapiuser (0963&000000/0000/CB70/5F:ADDB): found (78 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:20:39 10263*** c***** (0963&000000/0000/C5E5/68:21A9): found (83 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:20:39 10298*** c ***** (0963&000000/0000/C5E4/68:21A9): cache2 (46 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:20:40 10291*** c dvbapiuser (0963&000000/0000/CB70/5F:D38F): found (78 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:20:47 10298** c t***** (0963&000000/0000/C5E4/68:5A58): found (82 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:20:47 1026** c *****(0963&000000/0000/C5E5/68:5A58): cache2 (35 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:20:48 10291*** c dvbapiuser (0963&000000/0000/CB70/5F:27DC): found (78 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:20:55 10263***c ***** (0963&000000/0000/C5E5/68:AA17): found (82 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:20:55 10298*** c ****** (0963&000000/0000/C5E4/68:AA17): cache2 (36 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:20:56 10291B**c dvbapiuser (0963&000000/0000/CB70/5F:8F9F): found (79 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:21:03 10298*** c ***** (0963&000000/0000/C5E4/68:A4CD): found (82 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:21:03 10263****c ***** (0963&000000/0000/C5E5/68:A4CD): cache2 (44 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:21:04 10291***c dvbapiuser (0963&000000/0000/CB70/5F:9D29): found (78 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:21:11 1026***c ***** (0963&000000/0000/C5E5/68:1463): found (82 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:21:11 1029**** c ***** (0963&000000/0000/C5E4/68:1463): cache2 (25 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:21:12 10291** c dvbapiuser (0963&000000/0000/CB70/5F:0D9E): found (78 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:21:19 10298***c ***** (0963&000000/0000/C5E4/68:ACC9): found (82 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:21:19 10263*** c **** (0963&000000/0000/C5E5/68:ACC9): cache2 (62 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:21:20 1029*** c dvbapiuser (0963&000000/0000/CB70/5F:2443): found (78 ms) by slyuk - 0963:CB70 unknown
2014/01/29 07:21:27 1026*** c ***** (0963&000000/0000/C5E5/68:F2F8): found (86 ms) by slyuk - 0963:C5E5 unknown
2014/01/29 07:21:27 1029***c ***** (0963&000000/0000/C5E4/68:F2F8): cache2 (10 ms) by slyuk - 0963:C5E4 unknown
2014/01/29 07:21:28 1029*** c dvbapiuser (0963&000000/0000/CB70/5F:DF52): found (78 ms) by slyuk - 0963:CB70 unknown
Display More
but the funny thing is I subbed to bt last wk an that came through fine
thanks
this was a new install so it hasn't had a chance to update yet so don't want stay on 7054 if by chance it doesn't update near the date??
thanks
If its working you dont need to change it to be honest look here
I hear what ur saying mate but people are are saying on other forums that old oscams such 70** wont update is that correct that's what im asking??
thanks
hi guys
just a quick question I am running oscam 7054 on dreambox with commando image with entitlements till march an recently I have been told that old oscam builds don't update sly card and it needs to be above 904*build to get emms updates.
so I am asking is this info correct an do I need to update asap???
many thanks
Hi all
Just a quick question regarding oscam
Before oscam I was using openpli on ccam which would let me put dreambox on standby an clients still be active but since using oscam when I put dream in standby my client get disconnected.
Could u pls advise me what's causing this???
Many thanks