Posts by Lateron

Does anyone know how to interpret / read the OSCAM webif pages? Is there a readable WIKI somewhere? (Not at Streamboard.tv)

I cannot get my OSCAM working and need to know the meening of the logs.

I did not look at the Live Log before this all happened. Now it shows a lot of message similar to:

(ecm) anonymous (0100@00006A/5C00/5230/64:F976AA857DD149C810DD2D90583D9AA6): not found (10 ms)

What I have tried:

Copied over previously WORKING OSCAM files to Vu+ from PC

Restarted Vu+ & restarted OSCAM (blue key) to be sure

Switched to Channel 1 NPO1 (Coded channel) ==>> No picture!

Went to 192.168.0.60:888 (OSCAM details) ==> Status showed:

Upper ON 127.0.0.1 0 internal 0000:0000@000000 no data OFF(no entitements)

Lower ON 127.0.0.1 0 internal 5230:0100@00006A NPO3 HD no data CARDOK(no entitements)

Emulator ON 127.0.0.1 0 emu 0000:0000@000000 no data CARDOK(1664 entitements)

Status showed upper and lower card readers and an emulator. On the card readers showed theSRVID:CAID@PROVID as

0000:0000@000000 (upper card) and 5230:0100@00006A (lower card)

Put the card -Face Down- into the lower slot and restarted OSCAM ==>> No picture!!

Then showed for SRVID:CAID@PROVID:

Upper ON 127.0.0.1 0 internal 1B6C:0100@00006A

Lower ON 127.0.0.1 0 internal 00000:0000@000000

Emulator ON 127.0.0.1 0 emu 0000:0000@000000

Put the card -Face Down- into the UPPER slot and on Channel 1 NPO1 and restarted OSCAM ==>> No picture!!

Then showed for SRVID:CAID@PROVID:

Upper ON 127.0.0.1 0 internal 0000:0000@000000

Lower ON 127.0.0.1 0 internal 5230:0100@00006A

Emulator ON 127.0.0.1 0 emu 0000:0000@000000

It seems that when I switch cards to the other slot, the SRVID:CAID@PROVID goes to all zeros in the occupied slot and a normal value in the empty slot.

Also entitelments alway seem to be OFF except for the emulator.

I am not versed in all this. Can anyone throw some light on the subject?

Vu+ Solo 4K; Blackhole 3.0.5L image; OSCAM 11425; Canal Digitaal card; Sattelites 13.0º, 19.2º. 23.5º, 28.2º

This has happend at least three times before:

OSCAM works normally and I can get all the coded channels for my card. After I do a manual channel scan of each of the satellites OSCAM stops working and I cannot get my coded channels anymore.

I do not know how I got OSCAM to start working again when this happend in the past. I tried many things without success and then sudenly OSCAM starts working again. It takes days of trying things, so I do not know what worked. I have uninstalled OSCAM, gone to another version, restarted multiple times etc. etc.

Anyone got any suggestions? (I am not changing my Blackhole image for another if you are going to suggest that)

I have not tried a debug yet , but I think my problem has something to do with changing transponders. Eurosport 2 uses a lower frequency (10921) than any of the other channels in the Canaldigitaal package. I wonder if that is causing the load delay? Could Cccam have a switching problem? Any idea where I can find that kind of information or discussion?
==> In Summary: All Canaldigitaal channels can be received but only Eurosport 2 which has the lowest frequency of them all has a marked delay problem.

I had some other problems on my Vu+Duo so I did a factory reset and re-installed Black Hole 1.7.9 and Cccam 2.2.1 and uploaded my existing bouquets from my PC. All works fine except for Eurosport 2. When I tune into Eurosport 2 I get a blank screen without any message whatsoever. As it happened I left it like this by mistake and after about 7 minutes (!) I got a picture and sound. This morning when I tuned into Eurosport 2 the same thing happened, taking even longer, about 9 minutes before the picture came through.
Cccam is in started state otherwise I would not be able to receive the scrambled channels from Canaldigitaal. I can post the CCcam.cfg but you ask for a log file. Can you tell me where to find it and if I have to turn on logging first? And you mention DEBUG: What do you mean by that?
Glad for your help.

I use Black Hole 1.7.9 and Cccam 2.2.1 on my Vu+Duo. I have a valid CanalDigitaal card. All seems to be working OK except I keep loosing Eurosport 2 (Astra 19.2; 10920/H/22000/”7/8” German origin but included in the Dutch package). On my old equipment (Challenger II) I do not have this problem.
I use Cccam out-of-the-box, and have not needed to change the cfg file at all. I have re-scanned for channels multiple times both manually and automatically without any difference. Could my problem have anything to do with missing entries in the cfg file? If so, what entries should I make? If not, any suggestions as to solving my problem.
Thanks in advance for any suggestions.