hi bud had the same problem as you what i found was that the cable i was using from my box to motor was the problem so i used the cable from when i had virmin fitted and surprise the motor worked fine what i found cheaper cables did not carry the voltage from box to motor
Posts by pereras
-
-
yes ebay why if you cant help why post a comment that is not helpful or is it you just don't have any thing useful to add this is why i don't post on the forum because of people like you the word idiot springs to mind
-
hi all i have a question about a conax cam i have two cards that are paired to there boxes i was looking for the cams to use in my duo 2 box as there is no fix for oscam at moment one is a tring card the other is a digitalb card so i went to there home sites found there is a cam for tring card but not one for the other so then i went to ebay and found a new cam on there that said 8 Chanel dose this mean it will work with my digitalb card any help would be great thanx in advance
-
TSImage3-PowerVu-DM800-SIM2-SSL84D-engineerkhan15.zip
-
OpenPLi 4.0 with IPTV and GStreamer 1.6.2 released !!!! November 20th DM800HD
-
hi bud take a look here http://linuxsat-support.com/showthread.php?t=73798&highlight=fix+duo+red+light
-
@ meerkat yes the post was copied from another forum and yes you are intituled to your opinion but to just post its a load of bollocks is offensive I see that ten below did post a picture of the said card but like I said it makes no odds to me see I wont post on forums again because its not worth it don't bother to reply again as I will not reply to you again as far as I am concerned it over and I hope that sly do stop cs that's all I have to say and this can be closed
-
meerkat if you cant say anything positive I would keep your comments to your self I don't like being called a liar if you read the post prprely you will see that it said that the picture of the new card was removed because it had a water mark on it and it also said it took over 10 months for sly to complete the card change last time or are you only say ing that every thing that you post is right ?
tbh I very rarely post on forums because of people like you always have to put there comments in or is it just to get a post count if it dose happen then all well and good and if it don't well its no loss which means people will be able to continue with what ever they wish to do with there subs to me I don't care I would not have sly if you gave it me for free I think they are just a rip off full of repeats so makes no difference to me at all -
New UK *** TV cards 2014
found on another forum
Have *** UK started the roll-out of their new series viewing card ? Here’s what we are told the new viewing card looks like. With over 6 million connected homes it may take some months to complete. The last viewing card change to the all white *** card took more than 10 months to complete in 2009. Will this new viewing card spell the end for cardsharers ? -
-
hi mate not much about for this box any more you can try this if it helps
http://linuxsat-support.com/showthread.php?t=8466
or here -
-
QuickWeather_v8.1.rar
Quick weather 8.1
-
here you go lads
-
ok thanks for your help i think i fixed it seems to be working again i think it was s bad connection on the cable from the card reader to the board alli did was move the cable with a thin screwdriver went in through the ci slot so did not break the seal on the box any way will see inthe morrning if it still works but any way thanks for your help:haha:
-
thanks for reply have tryed that i did not work still the same
-
hi have a spiderbox 9000 hd combo but the thing is i cant get it to see any of my cards i have the latest pach on it and have tryed a reset i did manage to get it to see my sly card the other day and i entered the box key nad it worked ok for a day then i put the box into standby and went to bed the following day when i put the box on it did not show the card is there anything i am missing or have not done i have also tryed a gamma card and omnia card all with the same results if i go to the menu it says not inserted no other problems with the box every thing works ok thanks for help
