the task does it, it works at a high temperature and from time to time you have to restart it loses the signal but it is an economical deco I think that due to the price difference the Vu Zero is another world
Posts by neurona
-
-
Hello friend, does anyone have this deco working with CCcam?
With Oscam works
CCcam 2.3.2 does not work with C line
-
Thank you Master G all working, I did not know what to do ..... thank you very much again.
-
Hello friends can someone help me to install softcam in this decoder and tried all the versions that I found on the Internet without success, there is a new version for this deco uses cpu AMR V7
AXAS HIS TWIN
-
Hello friends I have the mega elite Astra + horbit card with my settings in oscam I can see all channels except DORCEL TV.
* Setup that channel works thanks.Maturity rating I have it disabled.
My configu
oscam.user
[reader]
label = Diablo
Protocol = internal
device = /dev/sci0
pincode = 0000
caid = 0500
detect = cd
ident = 0500:050F00,043800
group = 1oscam,config
[global]
logfile = /tmp/oscam.log
clienttimeout = 3900
clientmaxidle = 160
unlockparental = 1
nice = -1
maxlogsize = 2048
preferlocalcards = 1
dropdups = 1
lb_mode = 1
failbantime = 5[cache]
delay = 1
max_time = 8
max_hit_time = 0
wait_time = :0
cwcycle_dropold = 0[cccam]
port = pot
nodeid = nudo
version = version cccsm
reshare = 0
reshare_mode = 0[webif]
httpport = 8888
httpuser = user
httppwd = passwodr
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255
hideclient_to = 100 -
Hi, I have a problem with the Mac on my NBOX.
I have two receivers at home and both have the same MAC.I changed it with the following command:
Ifconfig eth0 down; Ifconfig eth0 hw ether 00: 09: 34: xx: xx: xx; Yesconfig eth0 upBut after interrupting the electrical network it returns to the old mac.
Someone can help me thanks.
-
Hi friend, thanks for the contribution, know the password of adults?
0000,1234,1111,2222,3333,4444,5555,6666,7777,8888,9999,01234 no work
-
Thanks friend I did not use image based on openpli 8.6
My decoder is Nbox iti5800sxI enter in plugin message (crossepg plugin not found)
-
Thanks Master G
usr/lib/enigma2/python/plugin/sistemplugin/ copy folder CrossEPG
usr/lib/python2.7 copy folder lib-dynload and file crossepg.pyo
What is the location of the files files : control, debian-binary, postrm ?
-
Hello partners.
Where can you find this plugin? For openpli image 8.6
Thank you -
-
Happy New Year to all .
It is a great forum, thanks -
thank you very much for answering, nano
if in Spain if it works -
My problem is: have Nbox decoder kernel version 2.6.32.59_stm24_0211
Enigma. 31.03.2013-master
version 8.6.0 release 06/25/2014
version front processor: 0
try to install FTP file: usbtuner_0.7.3_all.ipk
get this errorñnbox: / tmp # ipkg install usbtuner_0.7.3_all.ipk
Installing usbtuner (0.7.3) to root ...
Collected errors:
* Satisfy_dependencies_for: Can not Satisfy the following dependencies for usbtuner:
* Module-init-tools * enigma2 (> = 2.6git20091014) * module-init-tools *
* Opkg_install_cmd: Can not install package usbtuner.
person can help me thanks. -
hello
this is not the right section to my message
I hope to get help, I find another section
My problem is: have Nbox decoder kernel version 2.6.32.59_stm24_0211
Enigma. 31.03.2013-master
version 8.6.0 release 06/25/2014
version front processor: 0
try to install FTP file: usbtuner_0.7.3_all.ipk
get this errorñnbox: / tmp # ipkg install usbtuner_0.7.3_all.ipk
Installing usbtuner (0.7.3) to root ...
Collected errors:
* Satisfy_dependencies_for: Can not Satisfy the following dependencies for usbtuner:
* Module-init-tools * enigma2 (> = 2.6git20091014) * module-init-tools *
* Opkg_install_cmd: Can not install package usbtuner.
person can help me thanks. -
hello friends
You can install drivers DVB T (chipset q1010)
thank youcan anyone help me?
I need the drivers for this chipset q1010
used openpli v 8.3 thanks -
hello friends
where I can find manually created by nano?
thank you