Hello, I'm using Zgemma H2H here in Brazil with Net cable (DVB-C), the epg only loads after opening the channel, and the epg appears only the channels of the open frequency, if I edit the cable.xml with the carrier information Will the epg load fully?
In cable.xml there is no information about Brazilian Net.
Hello, I'm having this log definitively, would anyone know what's wrong in my setup so I can fix this?
2019-06-10 11:51:43 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:43 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:43 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:36 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:35 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:35 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:35 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:35 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
2019-06-10 11:51:35 - WARNING: ServiceMapper[net] - Connector for service id [0] requested, no sid in ecm request?
Thank you very much in advance.
Sorry for my ignorance, but does this improve csp performance?
Hello, the panel is working normally, users are connecting to csp through the mysql panel maneger, however I am having this error:
Failed to fetch user file 'http://localhost/genxml.php': java.io.FileNotFoundException: http://localhost/genxml.php
Does anyone know why I'm having this error?
Hello, does anyone know if you are working with php5.6?
Hello, I installed the panel but is not communicating with CSP, would anyone have any idea what it could be?
From one house to another, I want to broadcast in the condominium that I live for 2 neighbors, I intend to install xtrean code on a ubuntu pc that I have here and send a m3u list so they can watch on smart tv.
Hello everyone, I have an azbox elite and an azbox ultra HD, I would like to know what better image to stream and how many channels can I transmit at the same time?
I'm sorry ignorance, I asked because here in Brazil we have sky with red card NDS 3 that until the moment I could not do with oscam, a friend from Portugal told me that sky uses 3 key, and that I would need these keys to add In oscam.server, seb if this confers?
What is the difference between GCam and Oscam as a server?
Do you have group = 1 in the [account] for user = red ?
Yes, I do not know vove saw in the log that connected through mgcand, I am playing for the elite azbox with openspa 3.2 as client.
The log shows caid 0946 is being requested. Change 0907 in your configs to 0946.
I changed and the same error continues.
wrong caid
0960
Hello everyone, I'm trying to run it on oscam red sky card, but I'm having the following error, if anyone can help thank you.
bit of a confusing post thought he was talking uk card
Yes, Sky Brasil card red.
So, I tested with CAID 0907 and 0946 that say working with those 2, but always with the same error.
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Dec 1 14:01:22 2016
-------------------------------------------------------------------------------
2016/12/01 14:01:22 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11281 (i486-linux-gnu-ssl-libusb-pcsc)
2016/12/01 14:01:22 00000000 s (main) System name = Linux
2016/12/01 14:01:22 00000000 s (main) Host name = debian
2016/12/01 14:01:22 00000000 s (main) Release = 3.2.0-4-686-pae
2016/12/01 14:01:22 00000000 s (main) Version = #1 SMP Debian 3.2.82-1
2016/12/01 14:01:22 00000000 s (main) Machine = i686
2016/12/01 14:01:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5102
2016/12/01 14:01:22 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2016/12/01 14:01:22 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/12/01 14:01:22 00000000 s (main) signal handling initialized
2016/12/01 14:01:22 00000000 s (config) 4 provid's loaded
2016/12/01 14:01:22 00000000 s (config) 775 service-id's loaded in 1 ms
2016/12/01 14:01:22 00000000 s (config) 3 tier-id's loaded
2016/12/01 14:01:22 00000000 s (config) 1 lengths for caid guessing loaded
2016/12/01 14:01:22 00000000 s (config) 5 entries read from oscam.whitelist
2016/12/01 14:01:22 00000000 s (net) newcamd: initialized (fd=5, port=22550, prio=1)
2016/12/01 14:01:22 00000000 s (net) -> CAID: 0946 PROVID: 000000
2016/12/01 14:01:22 00000000 s (reader) skyred [pcsc] creating thread for device 0
2016/12/01 14:01:22 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/12/01 14:01:22 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2016/12/01 14:01:22 00000000 s (anticasc) anti cascading disabled
2016/12/01 14:01:22 07AEA314 r (reader) skyred [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2016/12/01 14:01:22 05E93851 h (webif) webif: decompressed 174152 bytes back into 423156 bytes
2016/12/01 14:01:22 05E93851 h (webif) HTTP Server running. ip=0.0.0.0 port=84
2016/12/01 14:01:23 07AEA314 r (reader) skyred [pcsc] PCSC was opened with handle: 593443160
2016/12/01 14:01:23 07AEA314 r (reader) skyred [pcsc] card detected
2016/12/01 14:01:23 07AEA314 r (reader) skyred [pcsc] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 47 4C 05
2016/12/01 14:01:25 07AEA314 r (reader) skyred [pcsc] card system not supported
2016/12/01 14:01:25 07AEA314 r (reader) skyred [pcsc] Normal mode failed, reverting to Deprecated Mode
2016/12/01 14:01:25 07AEA314 r (reader) skyred [pcsc] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 47 4C 05
2016/12/01 14:01:27 07AEA314 r (reader) skyred [pcsc] card system not supported
2016/12/01 14:01:27 07AEA314 r (reader) skyred [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/12/01 14:01:27 07AEA314 r (reader) skyred [pcsc] card initializing error
2016/12/01 14:01:29 01973568 c (newcamd) client connected to 22550 port
2016/12/01 14:01:29 01973568 c (client) encrypted newcamd:22550-client 192.168.0.13 granted (red, au=on (1 reader))
2016/12/01 14:01:29 01973568 c (newcamd) user red authenticated successfully (mgcamd)
2016/12/01 14:01:29 01973568 c (newcamd) AU disabled for user red
2016/12/01 14:01:29 01973568 c (newcamd) SID list will not be send to mgcamd client.
2016/12/01 14:01:30 01973568 c (ecm) red (0946@000000/09C8/01F8/56:C95C132FA6E3194BC8F24FB07B93956B): rejected group (0 ms) (no matching reader)
2016/12/01 14:01:38 01973568 c (-) -- Skipped 5 duplicated log lines --
2016/12/01 14:01:38 01973568 c (ecm) red (0946@000000/09C8/01F8/56:66D3D1D1B8D84CABC5EFD0E1BC5DD378): rejected group (1 ms) (no matching reader)
2016/12/01 14:01:40 01973568 c (ecm) red (0946@000000/09C8/01F8/56:66D3D1D1B8D84CABC5EFD0E1BC5DD378): rejected group (0 ms) (no matching reader)
The group is correct, I checked several times.
Show us the configs you are using..
Do you have the boxid added to oscam.server ?
Hello, I added box id, follow below my settings:
[global]
logfile = /tmp/oscam.log
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_save = 100
[newcamd]
port = 22550@0907:000000
key = 0102030405060708091011121314
[webif]
httpport = 84
httpuser = root
httppwd = joyce210355
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
[reader]
label = skyred
protocol = pcsc
device = 0
key = 0102030405060708091011121314
fallback = 1
caid = 0907
boxid = XXXXXXXX
detect = cd
mhz = 500
ident = 0907:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
Hello everyone, I'm trying to run it on oscam red sky card, but I'm having the following error, if anyone can help thank you.
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Dec 1 11:19:18 2016
-------------------------------------------------------------------------------
2016/12/01 11:19:18 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11281 (i486-linux-gnu-ssl-libusb-pcsc)
2016/12/01 11:19:18 00000000 s (main) System name = Linux
2016/12/01 11:19:18 00000000 s (main) Host name = debian
2016/12/01 11:19:18 00000000 s (main) Release = 3.2.0-4-686-pae
2016/12/01 11:19:18 00000000 s (main) Version = #1 SMP Debian 3.2.82-1
2016/12/01 11:19:18 00000000 s (main) Machine = i686
2016/12/01 11:19:18 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2198
2016/12/01 11:19:18 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2016/12/01 11:19:18 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/12/01 11:19:18 00000000 s (main) signal handling initialized
2016/12/01 11:19:18 00000000 s (config) 4 provid's loaded
2016/12/01 11:19:18 00000000 s (config) 775 service-id's loaded in 10 ms
2016/12/01 11:19:18 00000000 s (config) 3 tier-id's loaded
2016/12/01 11:19:18 00000000 s (config) 1 lengths for caid guessing loaded
2016/12/01 11:19:18 00000000 s (config) 5 entries read from oscam.whitelist
2016/12/01 11:19:18 00000000 s (net) newcamd: initialized (fd=5, port=22550, prio=1)
2016/12/01 11:19:18 00000000 s (net) -> CAID: 0907 PROVID: 000000
2016/12/01 11:19:18 00000000 s (reader) skyred [pcsc] creating thread for device 0
2016/12/01 11:19:18 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/12/01 11:19:18 00000000 s (anticasc) anti cascading disabled
2016/12/01 11:19:18 1C317BF9 r (reader) skyred [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2016/12/01 11:19:18 657D24C2 h (webif) webif: decompressed 174152 bytes back into 423156 bytes
2016/12/01 11:19:18 657D24C2 h (webif) HTTP Server running. ip=0.0.0.0 port=84
2016/12/01 11:19:19 1C317BF9 r (reader) skyred [pcsc] PCSC was opened with handle: 934297570
2016/12/01 11:19:19 1C317BF9 r (reader) skyred [pcsc] card detected
2016/12/01 11:19:19 1C317BF9 r (reader) skyred [pcsc] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 47 4C 05
2016/12/01 11:19:21 1C317BF9 r (reader) skyred [pcsc] card system not supported
2016/12/01 11:19:21 1C317BF9 r (reader) skyred [pcsc] Normal mode failed, reverting to Deprecated Mode
2016/12/01 11:19:21 1C317BF9 r (reader) skyred [pcsc] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 47 4C 05
2016/12/01 11:19:23 1C317BF9 r (reader) skyred [pcsc] card system not supported
2016/12/01 11:19:23 1C317BF9 r (reader) skyred [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/12/01 11:19:23 1C317BF9 r (reader) skyred [pcsc] card initializing error
I'm trying to set sending emails to users but is showing the message "channel disconected". Does anyone know how to solve this problem?
Hello, I am currently using version 2.2, I wonder if much changes compared with version 3.2.0 and how to advise me to do the upgrade, if I can do a fresh install and then import only users?
Would I like a tip before I do anything.
Thank you very much in advance.
Hello, I installed and configured everything as is in the manual, but when I set up the user in the receiver, this error appears:
2014-10-24 16:45:21 - WARNING: NewcamdSession[60146:net] - User 'teste' (xxx.xxx.xx.xxx) login denied, unauthorized/invalid/missing password
Is there any port that I should have opened?
I appreciate if you could help me.
Thanks
Hello, I installed everything as the tutorial boss, but when I access the panel this message appears:
It works!
This is the default web page for this server.
The web server software is running but no content has been added, yet.
Could anyone help me?
I'm with my instlado CSP and running properly on Ubuntu 12.04 (usr / local / csp), and installed the panel CSPADM and is running properly on the same machine (var / www / cspadm), but I'm getting this error in the logs of the csp:
2014-10-19 14:02:54 - WARNING: XmlUserManager - Unable to parse 'http://my ip/cspadm': Content is not allowed in prolog.
This is my setup:
<user-manager class="com.bowman.cardserv.XmlUserManager" allow-on-failure="false" log-failures="true">
<auth-config>
<user-source name="cspadm">
<user-file-url>http://my ip/cspadm</user-file-url>
<user-file-key>password</user-file-key>
</user-source>
<update-interval>2</update-interval>
If anyone can help me thank.
