oh, I'm sorry I have sent to you pc file ...
Zgemma H9.2h I think 4k Armv7 ?!
In attach Test it please ...
Yes 4k Armv7.
ncam.cortexa9hf-vfp-neon-Openssl-1.1-static file doesn't even start. No log file.
oh, I'm sorry I have sent to you pc file ...
Zgemma H9.2h I think 4k Armv7 ?!
In attach Test it please ...
Yes 4k Armv7.
ncam.cortexa9hf-vfp-neon-Openssl-1.1-static file doesn't even start. No log file.
Ok... in attach compress file after extract it you will find two files ...
Please test and send logo also ...
Sorry @fairbird! How to test them, since I use a Zgemma H9.2h box?
with version 10.8 does it works ?!!!
And also do this config ... then test it if does not work send the log of ncam from tmp
Hi @fairbird!
Regarding Ncam 10.8 everything was fine.
As for Ncam 10.9 I did the changes you asked me to do in ncam.config (I set netprio to "0") and nothing happen. Still the same problem with Tivusat card.
Furthermore, on the contrary with what happens with Ncam 10.8, when I try to see the multistream channels (the Italian ones in satellites 9.0 E and 5.0 W) with the Ncam 10.9 it is impossible.
Attached by you can find log files for both 10.8 and 10.9, as well as respective photos shooted in a multisteram channel, as mentioned above.
ncam (10.8).log ncam (10.9).log 065894d75b4256765.jpg843240c22bda5a6a892e2.jpg
armv7 = cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
Why not read the Tivusat gold card ???
It's true @fairbird! Ncam 10.9 does not read both Tivusat and Mediaset cards.
And one more thing ... If you want to test any thing emu or plugin ...etc
Don't just focus on one image as what you did now just on PurE2 ...
Test another images and then you will be find the problem where ?!
On Emu or Version of image ..
Hi @fairbird!
I solved the problem.
As you said there was not a problem with bin file of Ncam 10.9.
I changed the file enigma2-plugin-softcams-ncam-mips.list generated from Ncam_10.9.ipk in /var/lib/opkg/info with the one generated from Ncam_10.8.ipk.
Now Ncam 10.9 works fine in Zgemma H9.2h, PURE2 6.5 image, ARM processor.
Something is missing in the Ncam 10.9 version of that file. Perhaps only for my box type.
Thanks a lot for your help!
Display MorePlease share your config files here to other friends ... Or do you use the config what comes with ipk file ?!!
Concerning Zgemma H9.2h it's not a matter of configuration files. I've tried Ncam 10.9 even with old config files (the ones that work fine with Ncam 10.8) and I'm still facing the same problem.
What about Kihmathi ... He have same your device and he said every things work with new ncam ... ?!!
Try this bin file for test
And I will release new version with some fixes .... soon ...
Hi @fairbird!
@Kihmathi owns a Zgemma H7s with mipsel processor, instead my Zgemma H9.2h has a arm processor. My second box is a dm800hd se clone (mipsel). In dm800hd se clone Ncam 10.9 works fine and I can use CCcam.cfg file perfectly with the new configuration. I faced problem with arm processor.
Please share your config files here to other friends ... Or do you use the config what comes with ipk file ?!!
Concerning Zgemma H9.2h it's not a matter of configuration files. I've tried Ncam 10.9 even with old config files (the ones that work fine with Ncam 10.8) and I'm still facing the same problem.
Display MoreDisplay MoreThe bin file work nothing wrong .... maybe the script path of PURE..
Does emu show in panel ?! If Yes then the script in correct path ...
See in /tmp folder if you find ncam.log then the emu work.
Thanks a lot @fairbird!
I don't know if it is image's fault since Ncam 10.8 works fine with the same PURE image.
I'll check log file, as you advise me.
Anyway, thank you very much!
I had similar problems where it was working on 10.8 and not 10.9, then I choose the openssl binary and replaced it in /usr/bin/cam then it worked. Try that version, also start scripts of pure2 point to a different config folder in etc vs usual /etc/tuxbox/config check your start script in /usr/script*/cam. Open in notepad edit appropriately.
Hi Kihmathi, as fairbird said in a post above, in my Zgemma H9.2h part of the problem consists in the configuration of Server_1 that allows to use CCcam.cfg with Ncam 10.9. Apparently, Server_1 configuration doesn't run well on my box. I've deleted Server_1 from ncam.server, eliminated
- cccam_cfg_reconnect_delay = 90
- cccam_cfg_reconnect_attempts = 6
from [global] in ncam.config, and I removed the number 64 from [account] / group in ncam.user. In this conditions Ncam 10.9 started to work for a portion of time and then still black. Instead, Ncam 10.8 works fine!
Display MoreThe problem is in your C: line not from emu
Please check you server and you config ...
Emu work on PurE2 as I prove it here
Ncam 10.9 compiled and patched by READ
So this problem is from your side ...
I faced the same problem with SoftCam.key emulator, so c-lines have nothing to do with it.
send to my ncam.log from /tmp
Maybe it's the configuration that causes the problem. When I run Ncam 10.8 bin file with the configuration files for 10.9, that I downloaded from your first post, Ncam 10.8 also shows long interruptions from time to time in a regular order.
Here is the ncam.log
Emu work well on PurE2 last version 6.5
CodeDisplay Moreroot@dm920:~# opkg install /tmp/*.ipk Installing enigma2-plugin-softcams-ncam-mips (V10.9) on root. OE2.0 IMAGES: libssl1.1 OE2.0 IMAGES: libcrypto1.1 Configuring enigma2-plugin-softcams-ncam-mips. OE2.0 IMAGES: openssl 1.1.1 :Your Device IS ARM processor ... PURE2 image [ All Config Files found ] ------------------------------------------------------- * Ncam Config & Softcam files in [/etc/tuxbox/config] * ------------------------------------------------------- ******************************************* * Install Finished * * * * Need To Restart Enigma2 * * * * Patched and compile By RAED * *******************************************
Here are the respective photos from ZGEMMA H9.2h, image PURE2, which show that Ncam 10.9 does not work in my box.078cfa3.jpg
The bin file work nothing wrong .... maybe the script path of PURE..
Does emu show in panel ?! If Yes then the script in correct path ...
See in /tmp folder if you find ncam.log then the emu work.
Thanks a lot @fairbird!
I don't know if it is image's fault since Ncam 10.8 works fine with the same PURE image.
I'll check log file, as you advise me.
Anyway, thank you very much!
Hi fairbird! I replaced the .bin file only after noticing that the .bin downloaded through ipk file doesn't work. I just wanted to try the .bin file for arm processor, hoping it will go well with my arm processor. In both cases Ncam 10.9 doesn't work in ZGEMMA H9.2h, PURE2 6.5 image. On the contrary it goes well on dm800hd se (mipsel). Regards.
Display MoreHi @fairbird!
Doesn't work on ZGEMMA H9.2h, image PURE2 6.5.
After installing the Ncam-Images-MIPS-IPK, I've tried replacing .bin file with the one for (cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT but still no light at the end of tunnel.
Why you are replaced bin file after install ipk ?!!!
No need to replace any files (just install ipk) nothing more ...
Display More
Sadly no it didnt work via ccam.cfg or via ncam.server
attaching the log files.
log file with ncam 10.9
[hide][/hide]
log file with ncam 10.8
[hide][/hide]Thank you already I know the problem it in inIPV6 (Soon) I will add file to test
Hi @fairbird!
Doesn't work on ZGEMMA H9.2h, image PURE2 6.5.
After installing the Ncam-Images-MIPS-IPK, I've tried replacing .bin file with the one for (cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT but still no light at the end of tunnel.
@ gorski hi mate i change the skin but problem still the sime
64/5000
hi esmeralda1 you can watch the subscription card from digitalb on a VU + device
You cannot see Digitalb with another box other than that of Digitalb, 'cause Digitalb has paired their card with their decoder.
(Nuk mundesh albakos, pasi Digitalb-i e ka çiftëzuar kartën me dekoderin!)
Channel list menu
Which services? Where are the logs?
enigma2_crash_1586506569.logenigma2_crash_1586538605.logenigma2_crash_1586593348.logenigma2_crash_1586593662.log
I'm using a Zgemma H9.2h box.
Sometimes I encounter crashes when zapping with the services in the service list menu.
You're welcome! I think a thumbs-up :thumb: doesn't hurt anyone... :eye-tongue: