Thank You for the information.
Posts by Hbalika
-
-
Hello!
Im really think to subscribe for Sky De. The only one think, what is a disatvantate of Sky, they dont promote the CI+ module. Of course I would like to use the card in my VU+ reciever.
I can find some used SKY DE CI+ modules in the ebay, etc.... My question is, if I recieve the new sky Q box and card, is it possible to run the new card with CI+ module? ,
Thank You!
-
Dear All!
I know this topic is for DM7020 HD, but i would like to have image for DM7020S (Gemini).
If you have such old image somewhere, please share with me.
Thank you
BR
Balázs
-
Dear all!
Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..
svn is not supported command... ?
Does anybody installed simplebuild on OMV?
Thank you!
B
Hi.
You have to write here what error message you see in the terminal / shell.
How do I know where the problem occurred ? Uhm ...
Do you have SVN / GIT support installed on Linux at all ?
Hello!
After some months I tried again to install simplebuild in My Open media vault.
I tried with the following command.
git clone https://github.com/gorgone/s3_releases.git
And it looks like ' git ' is unkonw command.
Here zou can see my sceenshot ( sorry it in hungarian, but it means git command not found)
'root@H-Networks:~# git clone https://github.com/gorgone/s3_releases.git
-bash: git: parancs nem található'
How to enable, install Git /svn support?
Thank You
Balázs
-
Hello! Im also looking for that card. If you have it, i can pay for that card.
-
Thank You!
But it isn't work....
-
Dear all!
Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..
svn is not supported command... ?
Does anybody installed simplebuild on OMV?
Thank you!
B
-
Hi!
thank you for the instructions. -
Hello!
Im using Ubuntu 20,04 server, with oscam 11.684.
When I want to apply the anticascading feature, eg 5000ms delay for the good cw, it is not working. The dafault delay is 1000ms, and is I save the settings it is jumping back to 1000ms.
[anticasc]
enabled = 1
numusers = 10
penalty = 3
fakedelay = 1000 * that what i cannot modify...
Any suggestions, what should I do?
Thank You!
B
-
Hello! I have the same issue. I would like to use my PCSC reader, what is HID Omnikey 3121, with my Vu+Solo box.
As I see the quoted entry, if I follow this entry with telnet command on my VU+, I can add this PCSC reader option (driver or whatever) :) to my installed OSCam?
Thank You for answer.
Code
Display More| Settings: | CONF_DIR = /etc/tuxbox/config | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW | Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT | CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO STINGER SMART PCSC | Compiler : mipsel-vuplus-linux-gnu-gcc (GCC) 9.3.0 | Config : build/mipsel-vuplus-linux-gnu-ssl-libusb-pcsc/config.mak | Binary : Distribution/oscam-1.20_svn11583-CX-AIO-9.2.6-798-mipsel-vuplus-linux-gnu-ssl-libusb-pcsc
-
Hello!
Im lookig for oscam, with PCSC card reader support, for vu+ solo box.
Where can I find it? if it is available...
Thank You!
B
-
Hello!
I will check it. thank You!
B
Hello.
Do you have enabled AU to write EMM packets on to your IRDETO card ? If your Oscam in the set-top box also serves as a client for yourself, then you must allow the dvbapi loopback user to write EMM packets to your reader (AU - AutoUpdate - https://wiki.streamboard.tv/wiki/OSCam/en/AU).
Please restart the Oscam and then please check initial Live-Log from your Oscam-Webif. There must be information on whether the card is correctly initialized in your Oscam. You should also use 6 MHz because Oscam always points out that 6 MHz should be used for IRDETO.
My IRDETO config looks like this (Skylink provider / caid=0624):
oscam.server:
Code
Display More[reader] label = reader_sci0 protocol = internal device = /dev/sci0 caid = 0624 boxkey = A1C6F3D8B5E1F2C1 rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362 needsemmfirst = 1 needsglobalfirst = 1 force_irdeto = 1 detect = cd autospeed = 0 mhz = 600 cardmhz = 600 group = 1 emmcache = 0,3,29,0
oscam.conf:
Code
Display More[global] preferlocalcards = 2 loghistorylines = 1000 logduplicatelines = 1 [dvbapi] enabled = 1 au = 1 user = user_dvbapi [webif] httpport = 8888 httppollrefresh = 8 httprefresh = 10 httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255 # httpuser = xxxx # httppwd = yyyy httphelplang = en httphideidleclients = 0 httpscript = /usr/script httpshowpicons = 1 httptpl = /media/mmc/piconTPL #httptpl = /etc/tuxbox/config/oscam/piconTPL httposcamlabel = Server-Oscam
oscam.user:
-
Hello All!
I have a question about 0648 card config.
It is a quit new subscripition, with old card, and old original box.
I would like to use the card in my Dreambox, with oscam.
In the oscam I can see the entiltements, the card got a lot of EMMs, but no ECM.
No maching reader... the message....
Do you have some reader config?
my config is:
[reader]
label = ORF
enable = 1
protocol = internal
device = /dev/sci0
caid = 0648
boxkey = 11223......................8
rsakey = D...................................................................................12D
force_irdeto = 1
detect = cd
mhz = 500
group = 1
emmcache = 1,1,2,0
BK and RSA is from the public net...
Thank You for the answer!
B
-
Hello!
What can we know about fix powervu emm algorithm? It will helps to open AFN? Or we wll wee...
By the way, thank you for uploading :)
-
Nice to read Telekom RO is working with oscam, or cccam. What about the Hungarian 4w, Slovakian 0.8W and the new Serbian 23.5 Telekom? As far as I know both are not working, or not so public.
-
Thanks for the info! I working on in it :)
-
Hello!
I would like to create the scrypt for oscam, in E2. The aim is to restart the oscam in ewery day (eg. 03:00 AM)
Does anybody have this kind of scrypt? Sorry about it, but I newer make any scrypt for oscam... and I dont have any idea how to make it... :)
Thank you for the support !
-
Thank You!
B
you can only use it in the original receiver if you are unlucky, the card will be paired when sending. You could still operate V14 in a module on a sat receiver, but then it will be paired to the module. you want to make a new subscription the few options you have sharing you can't do with it at all!
if you want to be good then order a module when ordering if you insist on inventing a story if necessary.
-
Dear All!
I plan to subscibe for a german/ austrian Sky package. And of courese I would like to use the card in Oscam. Is there any difficulties to make it run? It will be a new subscription. As I know the card will be V14, or V15.(perhaps)
I found some info about difficult pairing method or whatwever.
Do you have some info about it? It will can work, or I have to forget it...
Thx
B