Posts by Hbalika

Dear All!

Im not sure this is the right topic for my issue, If not im really sorry about that..

So my issue is with the BISS chanels at 42E 11516V.

According my box, my keys are ok, the emulator found the key, but i have black screen.

Do I have to put something in to the oscam.dvbapi file to see the channels? Like in case of ERT channels in 39E?

Thank You!

B

del

Thank You!

I tried with the same vide, just with HEVC, and it is working.

Thx again.

B

Dear All!

I have a VU+ DUO 4K SE box, with Open ATV 7.4 image.

I like to use the media player plugin.

But in case of UHD MPEG-4 videos, i cant see the video, just the sound.

The affected videos are MPEG form, 3840*2160 the resulution with 25FPS, the bitrate is not really high is just 16MBit, the video format is AVC.

Im not sure what can be the problem. I have to dowload some extra plugin?

Thank You for your support

Hello!

Thank you!

B

dear All!

Today I reflash my VU+Duo2 box. The image is openpli 9.0. the oscame emu is 11766.

I have a 186A nagra merlin card, I have the reader config, but in this new oscam the card is not working.

• 2024/05/17 19:34:06 6535F643 r (reader) HD+04_ [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2024/05/17 19:34:06 6535F643 r (reader) HD+04_ [internal] Reader sci internal, detected box type: vuduo2
• 2024/05/17 19:34:06 6535F643 r (reader) HD+04_ [internal] card detected
• 2024/05/17 19:34:06 6535F643 r (reader) HD+04_ [internal] ATR: ********
• 2024/05/17 19:34:10 6535F643 r (reader) HD+04_ [internal] detected card in CAK7 mode
• 2024/05/17 19:34:10 6535F643 r (reader) HD+04_ [internal] Initial AES: ***********
• 2024/05/17 19:34:11 6535F643 r (reader) HD+04_ [internal] Rom revision: DNASP420 RevS60
• 2024/05/17 19:34:11 6535F643 r (reader) HD+04_ [internal] no key3588 defined
• 2024/05/17 19:34:11 6535F643 r (reader) HD+04_ [internal] card system not supported
• 2024/05/17 19:34:11 6535F643 r (reader) HD+04_ [internal] Normal mode failed, reverting to Deprecated Mode
• 2024/05/17 19:34:12 6535F643 r (reader) HD+04_ [internal] ATR: *********

error: no key3588 defined

If I see the reader setting in nagra merlin secion, i can put the data for mod1, data50 and mod50. Where i have put the key60, exp60, cwekey?

could you explane what to put in to the new oscam?

in my case mod2, key3588, and key 3310 is empty.... Or i dont know what to put here.....

Thank You for your support!

B

Thank You for the information.

Hello!

Im really think to subscribe for Sky De. The only one think, what is a disatvantate of Sky, they dont promote the CI+ module. Of course I would like to use the card in my VU+ reciever.

I can find some used SKY DE CI+ modules in the ebay, etc.... My question is, if I recieve the new sky Q box and card, is it possible to run the new card with CI+ module? ,

Thank You!

Dear All!

I know this topic is for DM7020 HD, but i would like to have image for DM7020S (Gemini).

If you have such old image somewhere, please share with me.

Thank you

BR

Balázs

Quote from s3n0

Quote from Hbalika

Dear all!

Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..

svn is not supported command... ?

Does anybody installed simplebuild on OMV?

Thank you!

B

Display More

Hi.

You have to write here what error message you see in the terminal / shell.

How do I know where the problem occurred ? Uhm ...

Do you have SVN / GIT support installed on Linux at all ?

Display More

Hello!

After some months I tried again to install simplebuild in My Open media vault.

I tried with the following command.

git clone https://github.com/gorgone/s3_releases.git

And it looks like ' git ' is unkonw command.

Here zou can see my sceenshot ( sorry it in hungarian, but it means git command not found)

'root@H-Networks:~# git clone https://github.com/gorgone/s3_releases.git

-bash: git: parancs nem található'

1d875.png

How to enable, install Git /svn support?

Thank You

Balázs

Hello! Im also looking for that card. If you have it, i can pay for that card.

Thank You!

But it isn't work....

Dear all!

Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..

svn is not supported command... ?

Does anybody installed simplebuild on OMV?

Thank you!

B

Hi!
thank you for the instructions.

Hello!

Im using Ubuntu 20,04 server, with oscam 11.684.

When I want to apply the anticascading feature, eg 5000ms delay for the good cw, it is not working. The dafault delay is 1000ms, and is I save the settings it is jumping back to 1000ms.

[anticasc]

enabled = 1

numusers = 10

penalty = 3

fakedelay = 1000 * that what i cannot modify...

Any suggestions, what should I do?

Thank You!

B

Quote from MOHAMED_OS

Hello! I have the same issue. I would like to use my PCSC reader, what is HID Omnikey 3121, with my Vu+Solo box.

As I see the quoted entry, if I follow this entry with telnet command on my VU+, I can add this PCSC reader option (driver or whatever) :) to my installed OSCam?

Thank You for answer.

Code

| Settings:
|  CONF_DIR = /etc/tuxbox/config
|  CC_OPTS  = -O2 -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8
|  LDFLAGS  = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8
|  LIBS     = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl
|  UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW
|  Readers  : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO STINGER SMART PCSC
|  Compiler : mipsel-vuplus-linux-gnu-gcc (GCC) 9.3.0
|  Config   : build/mipsel-vuplus-linux-gnu-ssl-libusb-pcsc/config.mak
|  Binary   : Distribution/oscam-1.20_svn11583-CX-AIO-9.2.6-798-mipsel-vuplus-linux-gnu-ssl-libusb-pcsc

Display More

Hello!

Im lookig for oscam, with PCSC card reader support, for vu+ solo box.

Where can I find it? if it is available...

Thank You!

B

Hello!

I will check it. thank You!

B

Quote from s3n0

Hello.

Do you have enabled AU to write EMM packets on to your IRDETO card ? If your Oscam in the set-top box also serves as a client for yourself, then you must allow the dvbapi loopback user to write EMM packets to your reader (AU - AutoUpdate - https://wiki.streamboard.tv/wiki/OSCam/en/AU).

Please restart the Oscam and then please check initial Live-Log from your Oscam-Webif. There must be information on whether the card is correctly initialized in your Oscam. You should also use 6 MHz because Oscam always points out that 6 MHz should be used for IRDETO.

My IRDETO config looks like this (Skylink provider / caid=0624):

oscam.server:

Code

[reader]
label                         = reader_sci0
protocol                      = internal
device                        = /dev/sci0
caid                          = 0624
boxkey                        = A1C6F3D8B5E1F2C1
rsakey                        = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
needsemmfirst                 = 1
needsglobalfirst              = 1
force_irdeto                  = 1
detect                        = cd
autospeed                     = 0
mhz                           = 600
cardmhz                       = 600
group                         = 1
emmcache                      = 0,3,29,0

Display More

oscam.conf:

Code

[global]
preferlocalcards        = 2
loghistorylines         = 1000
logduplicatelines       = 1

[dvbapi]
enabled                 = 1
au                      = 1
user                    = user_dvbapi

[webif]
httpport                = 8888
httppollrefresh         = 8
httprefresh             = 10
httpallowed             = 127.0.0.1,0.0.0.0-255.255.255.255
# httpuser                = xxxx
# httppwd                 = yyyy
httphelplang            = en
httphideidleclients     = 0
httpscript              = /usr/script
httpshowpicons          = 1
httptpl                 = /media/mmc/piconTPL
#httptpl                 = /etc/tuxbox/config/oscam/piconTPL
httposcamlabel          = Server-Oscam 

Display More

oscam.user:

Code

[account]
user     = user_dvbapi
pwd      = 
caid     = 0624
au       = reader_sci0
group    = 1

Display More

Hello All!

I have a question about 0648 card config.

It is a quit new subscripition, with old card, and old original box.

I would like to use the card in my Dreambox, with oscam.

In the oscam I can see the entiltements, the card got a lot of EMMs, but no ECM.

No maching reader... the message....

Do you have some reader config?

my config is:

[reader]

label = ORF

enable = 1

protocol = internal

device = /dev/sci0

caid = 0648

boxkey = 11223......................8

rsakey = D...................................................................................12D

force_irdeto = 1

detect = cd

mhz = 500

group = 1

emmcache = 1,1,2,0

BK and RSA is from the public net...

Thank You for the answer!

B

Hello!

What can we know about fix powervu emm algorithm? It will helps to open AFN? Or we wll wee...

By the way, thank you for uploading :)