Edit scrip and save Linux format !

1: open (writ notpad++) script tivusat.sh edit line from user, passw, port, lable an save (linux format)

And you not used user and passwd from oscam web you set is:

oscam_user="" #Sostituisci con user oscam-web

oscam_passwd="" #Sostituisci con la passwd oscam-web

In my opinion, so as not to make anyone struggle to always change the oscam, I use a script to update my gold independently, thanks to the authors.

1: open (writ notpad++) script tivusat.sh edit line from user, passw, port, lable an save (linux format)

2: open terminal on you e2 box (putty,telnet)

3: install curl "opkg install curl"

4: upload tivusat.sh script on you box where you for example /usr/bin/

5: send comand "chmod 0755 /usr/bin/tivusat.sh"

6: send comand "crontab -e" and put the line "*/5 * * * * /usr/bin/tivusat.sh" and prest ctrl+x save crontab update emm 5min.

tivusat.sh

OSCAM 11734

Message: deleted module-ird-guess files

improved some log message for videoguard thanks to ohmza

proper fix for mdc2.c

OSCAM 11735

added Streamrelay libdvbcsa - thanks to lpm11 <lpm11@lpm11>, fegol, icb, loka, kitte888, youtube18, WXbet and many more

added cak7 patch - thanks to ohmza, TV-Gamer and other

OSCAM 11736

Message: fixind CLANG compiler for no-schedule-insns flag.

OSCAM 11737

Message: fixing HD05 thanks to ohmza convert space to tabs

OSCAM 11738

Message: removing ffdecsa

added libdvbcsa_buffer Patch thanks to WXbet and others

fix for HD04 Tiers and 1856 thanks to ohmza

OSCAM 11739

Message: typo fix for Makefile und CMakeLists.txt thanks to ohmza

fix tivusat 1856 shared emm thanks to ohmza

OSCAM 11740

Message: fix #4913 gbox part remove as defaults CARDREADER_STINGER & MODULE_SCAM

Tray to i's driver s960

DRIVER

Da utizătorul este sun simpatic domn Grec, care are un card tv cu frresat activ, avea toate setarile in regula mai putin,

ecmheaderwhitelist = 8170647062,8070647062 care nu trebuie activata, fără filtru acesta cardu face up lucru care sa întâmplat deja, filtru ecm era pentru vechiul card 0500.

Ai rezolvat ?

Daca cardul nu face "au" verifica daca la reader ai aceasta setare, daca este șterge cardu face "AU" fără probleme

 ecmheaderwhitelist = 8170647062,8070647062

Plase put hear you oscam log.

You have to update go to tvr1 hd channel after a few minutes you should have light (at 16E eutelsat)

@samur Is your source code public or not ?

Tray to send emm manual mod wriht web oscam

First of all, when choosing a receiver with enigma2, the first thing you need to see is which model has software support, which is the most important thing.

ZGEMMA H7S mit 2*DVB-S2X + DVB-T2/C 4K UHD Satelliten Receiver

It doesn't update the 183E card, only with active network, for Sky it depends on who buys it, it already comes with server included in the price as I saw on chinese sites.

Please update new image, thanks.

Come on, you still haven't understood gtmedia and the little box that keeps you a slave for a few pennies and it will certainly never be a dreambox.

Quote from corrycorry72

all sky ita down again

Gtmedia the BEST !

You're definitely joking, do you know what you're saying?

11731 pcsc

oscam-svn11731-Linux-x86_64-webif-dvbapi-ssl-pcsc.rar

Quote from Marchella

Quote from gobi2000

Press Ctrl+C to stop autoboot

and get boot info

Code

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.01.08 14:04:07 =~=~=~=~=~=~=~=~=~=~=~=

Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK

lsadc voltage min: 000002FE, max: 00000301, aver: 000002FF, index: 00000001

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:57:41

Reg Version:  v1.6.0\
Reg Time:     2019/05/23 16:52:25
Reg Name:     hi3798mv2dmb_hi3798mv200_DDR4-2133_2GB_16bitx2_2layers.reg
DDRS
Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Compressed-boot v1.0.0
Uncompress........................Ok


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (h10@builder) (May 25 2019 - 13:59:27)

Fastboot:      Version 3.3.0
Build Date:    May 25 2019, 14:02:06
CPU:           Hi3798Mv200 
Boot Media:    eMMC
DDR Size:      2GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:131 endp:110
Tuning SampleClock. mix set phase:[02/07] ele:[12/18] 
MMC/SD Card:
    MID:         0x15
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   14910M Bytes (High Capacity)
    Name:        "AJTD4R"
    Chip Type:   MMC
    Version:     5.1
    Speed:       100000000Hz
    Mode:        HS400
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes



*******************************

serial: xxxxxxxxxxxxxxxx
mac:   xxxxxxxxxxxxxxx

*******************************

Net:   eth0 phymdio(31) invalid, use default:0
upWarning: failed to set MAC address
, downWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address


Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000


SDK Version: ZGEMMA-H10

mac:00:17:9A:26:31:C8
Reserve Memory
    Start Addr:          0x7A8FE000
    Bound Addr:          0x8D81000
    Free  Addr:          0x791F7000
    Alloc Block:  Addr         Size
                  0x7A4FD000   0x400000
                  0x7A1FC000   0x300000
                  0x7A1F9000   0x2000
                  0x7A178000   0x80000
                  0x79B88000   0x5EF000
                  0x7939E000   0x7E9000
                  0x7939A000   0x3000
                  0x79204000   0x195000
                  0x791FA000   0x9000
                  0x791F7000   0x2000

reading STARTUP_ONCE

0 bytes read
Total of 1 byte were the same
Total of 1 byte were the same
reading STARTUP

225 bytes read
byte at 0x01000000 (0x62) != byte at 0x04000000 (0x00)
Total of 0 bytes were the same
Press Ctrl+C to stop autoboot
fastboot# <INTERRUPT>

Display More

Yo hawe stop fasboot ok, hawe image output hdmi from recovery menu ?

Press Ctrl+C to stop autoboot

and get boot info

tiping "help"

How to get Ins nds writh oscam

Telekom TV (Romania)) – OSCam

https://trac.streamboard.tv/oscam/ticket/4797#comment:2

exemple here is one Mini TUTO for TTV caid 091F

- STEP 1 : Find BoxID / you can do it directly with OsCam (i.e. r11581) with option -S ((reader) tTV [internal] serial: 0000XXXX, BoxID: XXXXXXXX, baseyear: 200X)
- STEP 2 : Find ins7e / you can find it via menu and to adapt it in this format 6E736BXXXXXXXXXXXXXXXXXXXXXXXXXX00010202030002020203 ?
- STEP 3 : how to find k1 /
step 3.1 : you need to switch in debug logs 6 via OsCam LiveLog -> Show Settings -> select 2 + 4 (Switch Debug from 6 to) than search for (Search01: crypted CW is: and Search02: ecm hash:) than check Found Only
step 3.2 : check with someone who has a working card :) in order to compare the ECM hash in the same time for the same channel
step 3.3 : once you have one working decrypted CW vs your encrypted CW with the same HASH (the most important thing) you can start DES attack to find your unique k1 via hashcat <hashcat -m 14000 eCW:dCW -o /root/tTV.txt -a 3 -1 /usr/share/hashcat/charsets/DES_full.charset --hex-charset ?1?1?1?1?1?1?1?1 -w 4 --force> (you can use vast.ai to RENT a several GPU configs)

For info : with 8x RTX 2080 Ti k1 was calculated in 1 day, 6 hours on 46.23 % :)))

Here is the working reader (AU is activated and works very well) :

label = tTV
description = tTV
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 091F
boxid = your 8char boxID as described in STEP 1
ins7e = your 52char ins7e as described in STEP 2
k1_unique = your 16char k1 calculated as described in STEP 3
fix07 = 0
readtiers = 2
detect = cd
mhz = 450
cardmhz = 2700
ident = 091F:000000
group = 1
emmcache = 1,1,3,0
blockemm-unknown = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
disablecrccws = 1

[reader]
label = TTV
enable = 1
protocol = internal
device = /dev/sci0
disablecrccws_only_for = 091F:000000
caid = 091F
boxid = E11809B5 #exemple
ins7e = 4D00166000000000611809B50000000000010202030002020203 #exemple
k1_generic = 86C1F1CB6DB59740 #exemple
detect = cd
group = 1
blockemm-unknown = 1
blockemm-u = 1
saveemm-u = 1

Or

[reader]
label = TTV
enable = 1
protocol = internal
device = /dev/sci0
disablecrccws_only_for = 091F:000000
caid = 091F
boxid = E11809B5 #exemple
ins7e = 4D00166000000000611809B50000000000010202030002020203 #exemple
k1_unique = 86C1F1CB6DB59740 #exemple
detect = cd
group = 1
blockemm-unknown = 1
blockemm-u = 1
saveemm-u = 1

Thanks @ciprysat