no they didnt come on, basically it had a nabilosat image with the early version of oscam 40 something build and that kept going off randomly, anyone know why this is? so i put your image on with flashwizard and once it was done and before i manually restarted the box the channels all start working , then arter i reboot i dont get nothing no matter how long i wait
and when i check on the oscam webinterface its coming up with an error the theres no reader, so ive flashed back to nablosat which works but as i say every now and again once to twice a day i have to restart oscam as it randomly stops
Posts by dixiedean
-
-
once i reboot box i lose my channels, its as tho oscam stops reading cardalso when i first tried image i was only getting some pay channels but not most of them
-
thanks guys, thought it was something stupid like that
-
hi guys i got a strange problem when i go onto 16 east satalite i am getting 67 percent signal on all the channels exept for the tring ones, as soon as i go on a tring channel the signal drops to nothing, any help appreciated
-
yes always keep it up to date
-
just wondering if it is ri*** using openboxes as when they startup they display your ip address like dyndns could this not then be linked back to you if it got into the wrong hands?
-
didnt work that new2 for some reason did everything u said could we be missing something?
-
thanks new2 will try that
-
You need N line. It looks like this:
N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
In oscam.conf file you need to have these lines:
[newcamd]
key = 0102030405060708091011121314
port = 34000@1830:003411Key line is always the same. Port line is always different, it depends on card that you have. Port number (34000) can be anything. Its your choice.
Oscam.user file is also important. Look for these lines:
user = user
pwd = passYou can choose password and username yourself.
And with all this info we can make N line:
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Now we can add this N line to cccam.cfg and thats it. Oscam is now connected to cccam. We can also add 256 to the end of N line. With this trick cccam see our oscam card as local. This trick doesnt work with 2.1.4 cccam version.
so if then after this i want to give n line to someone else how does this work?
-
didnt check them while the match was on but as it stands i dont have any
type: Conax, caid: 0BAA, serial: ########, hex serial: ########, card: v64
Providers: 1
Provider: 1 Provider-Id: 000000
Provider: 1 SharedAddress: 00000000
Package: 1, id: 1111, date: 2011/05/01 - 2011/05/31, name: AlbaniaSat -
am only getting 59 % signal do u think this would have an effect its locked but seems low or is that normal, very strange how i get all the matches but only the matches
-
master g hve u got one of these running?
-
yes nothing
-
ok little update on this had it running with mg camd and its taken loads of emms but no unique ones but other than that i flicked it on tring sport and there was the city match working then i took card out and checked to see if it worked in conax and yes it did, the problem ive got is its only clearing the channels that the matches are on and only when they are on so i am still baffled
-
[reader]
label = slot0
enable = 1
protocol = internal
device = /dev/sci0
pincode = 1234
services =
caid = 0500
detect = cd
mhz = 600
cardmhz = 600
ident = 0500:042700
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100[reader]
label = reader-1
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 0BAA
detect = cd
mhz = 357
cardmhz = 357
ident = 0BAA:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
auprovid = 1F1F1F -
can u double check for me
-
have since changed box from a dm800 to vu+duo so not sure i am on that image u sent
-
ok master g can u check my reader config here it is
Enable:
AU disabled:
AU Provid: tring
Fallback:
Group: 1
Device: /dev/sci0
Caid: 0BAAIdent: 0BAA:000000
Emmcache: 1,3,2
Blockemm: unknown unique shared global
Ecmcache:
Loadbalance weight:
Services: film_e_cinema !film_e_cinema
sport !sport
calcio !calcio
supercalcio !supercalcio
milan !milan
juventus !juventus
inter !inter
roma !roma
mototv !mototv
caccia_e_pesca !caccia_e_pesca
classica !classica
serie_e_show !serie_e_show
mondi_e_culture !mondi_e_culture
bambini !bambini
musica !musica
news !news
la7_mtv !la7_mtv
hd !hd
prima_fila !prima_fila
contotv !contotv
Reader specific settings for protocol internal
Smargopatch:
Pincode:
Disableserverfilter:
Force Irdeto:
Boxid:
RSA key:
Tiger RSA key:
Boxkey:
ATR:
Detect:
Mhz: 357
Cardmhz: 357
Deprecated:
Readnano:
Blocknano:
Savenano: -
ok i got that with the conax so now i put it in the internal using oscam and cccam yes or mgcamd ?
-
ok guy hit a brick wall with this and desperatley need help got oscam and cccam running even had it taking emms from mgcamd and still no picture, ihad it in conax cam over night aswell ive got a vu+dou with tring ready image the card is showing on oscam but its not clearing channels help needed badly