Posts by luigi86

You can get a MultiCS HB client version that goes well with CCCam 2.3.9 as a client.

Thanks for all the help received in this Forum I have always given my contributions in this community.

I am the administrator of the Spanish MultiCS Support Forum. You can find me through google. I am not going to give links or need advertising.

If I can give contributions to this Forum I will give them in due course.

Thanks to messi89 the best version that works with CCcam 2.3.2_de, CCcam 2.3.8, CCcam 2.3.9 is the only programmer that developed this version of CCcam as a client, it is the united version of MuliCS that works well with these versions. I see this in programmers after three years, giving you complaints about this is a shame.

Quote from moorman

gave you example ( think you'll like the multics config )

and i know after you try it

you'll use it

Don't like CentOS 7 but each to their own

Display More

Fix the problem of MultiCs Hellboy HB 57 to change server and then after MultiCS r84 for clients in CCcam on the same server.

All perfect.

I find it wrong that CCCcam versions 2.3.2_de, 2.3.8,2.3.9 are not compatible with MultiCS HB.

I have had this problem for more than three years and the promoters of MultiCS do not do any of this to fix it.

It seems incredible to me that they do not release new versions to solve this problem.

Only MultiCS r84 supports as client CCCcam 2.3.2_de, 2.3.8,2.3.9 on your receiver and you have to put NEW versions of MultiCS for this problem.

Quote from moorman

think your reading it wrong

read it

ubuntu multics to ubuntu oscam

ubuntu oscam to E2 box cccam whatever

Display More

ok so I have but with CentOS 7 and it freezes every 10 seconds with hb 58.

Quote from moorman

simple run mutics to oscam in linux server

better still to cccam in linux

from linux server cccam or oscam server to unknown box with unknown image running cccam

Try what you say MultiCS hellboy HB 58 as exchange and oscam to send to visualization by CCCcam 2.3.9 and it keeps giving the same problems freezing every 10 seconds

Quote from >>Artorius<<

I use HB 58 and with Ocsam as client and it works very well. CCCam has had no real updates and support for years, just a few patched versions which I doubt came from the original developers.

I already know that partner that with hb 58 and oscam as a client it works perfectly, the problem is that with HB 58 the versions CCCcam 2.3.2_de, Cccam 2.3.8 and CCcam 2.3.9 as client do not work have freezes every 10 seconds are not supported.

Only MultiCS r84 is compatible with these versions of CCCam as client.

I have been several years and I cannot find a solution to this problem when I put the versions CCcam 2.3.2_de, CCcam 2.3.8, CCcam 2.3.9 in my profile 1810 nagra of MultiCS begins to give freezes every 10 seconds in visualization in all the channels and not I find no solution to this problem. Ask the programmers but they don't give you a solution.

The only version that works well is MultiCS r84 works well with these versions of CCcam without problems but when I change to other versions of MultiCS the freezes already begin, some way to fix this problem.

OpenPLi 7 release candidate

-Build from OpenPLi git source develop branch

-GCC 6.3.0

-GLIBC 2.25

-GStreamer 1.14.4

-Python 2.7.13

-Some big binaries compressed with UPX (Ultimate Packer for eXecutables)

-Removed lots of python source files from the image

-Dedicated feed server

The box has about 4MB free after a virgin install, it's enough to run a softcam, and some other small plugins.

Keep in mind the free space is limited and don't go wild on installing plugins.

See Releasenotes for more info.

OpenPLi-7-dm800se #ssl84d:

<-Download->

OpenPLi 7 release candidate

-Build from OpenPLi git source develop branch

-GCC 6.3.0

-EGLIBC 2.19

-Kernel 2.6.18

-GStreamer 1.14.4

-Python 2.7.13

-Some big binaries compressed with UPX (Ultimate Packer for eXecutables)

-Removed lots of python source files from the image

-Dedicated feed server

-Big thanks to Hains, Mastag and Persian Prince for their hard work on PLi metas.

The box has about 4MB free after a virgin install, it's enough to run a softcam, and some other small plugins.

Keep in mind the free space is limited and don't go wild on installing plugins.

See Releasenotes for more info.

OpenPLi-7-dm800 #ssl84d:

<-Download->

Quote from s3n0

Unfortunately, Cccam SoftCAM has very poor support for ARM processors. Originally, Cccam softcam is programmed to work on MIPS processors.

You can try to use the Oscam, which has open source code and all problems can be solved in Oscam. It has constantly updated. Cccam is forgotten because the whole world cannot work on it (to detect and report bugs in the Cccam softcam operation).

ok I already imagined that there was no support I like more cccam because it is easier but if the programmer does not compile a version for this processor then there will be no choice but to run it with the oscam I have already tried the oscam and it works well.

Hi, Is there a CCCam version for this Axas HIS Twin HD receiver model?

I can't find the binary anywhere in CCCam for this type of receivers I only find oscam.

CPU: Arm Cortex A9

I have had the openatv image and the vpn plugin works perfectly.

But I have changed the image and I have put the openpli 4.0 because it is lighter and the receiver goes better but I have done all the installation by telnet of the vpn plugin and it does not give me the tunel vpn connection.

Any way to solve the problem with this image?

Here I leave astra settings 19.2.ºE and hotbird 13ºE for MultiCS r82:

This configuration includes not wearing viewing profiles greetings.

Cacheex mode:

CacheEx: mode 3

CS378x CacheEX: mode 2 and mode 3

updated 24/06/2016

regards

I have the same problem with Zgemma star s still bricked've reprogrammed with JTAG crypress and continues with steady red light.

Greetings.

I connected my zgemma star s JTAG cypress rs 232 and reprogram the flash and continues the red LED, can be the CFE who has not set well?

script oscam update for enigma 2 working 100 %:

#!/bin/sh




##################################################################################
## Personalizza l'hardware lasciando non commentata la variabile hardware relativa al tuo sistema
## altri hardware supportati li trovi quì :
## http://download.oscam.cc/index.php?direction=0&order=mod&directory=1.20_TRUNK&
##
## Personalizza path e nome del binario oscam nella variabile oscambin
##
## Personalizza i comandi start e stop relativi al tuo sistema
##################################################################################







oscambin="/usr/bin/oscam";




oscamstart="/usr/emuscript/Oscam_em.sh start" # ruta script de inicio oscam
oscamstop="/usr/emuscript/Oscam_em.sh stop" # ruta script de inicio oscam
#oscamstart="service oscam start" # upstart
#oscamstop="service oscam stop" # upstart
#oscamstart="systemctl stop oscam" # systemd
#oscamstop="systemctl start oscam" # systemd




#tipo="webif-Light"
#tipo="webif-libusb-ssl-Distribution"
#tipo="webif-libusb-Distribution"
tipo="webif-Distribution"




hardware="mips-tuxbox-oe2.0"
#hardware="powerpc-tuxbox-old"
#hardware="mips-wrt54g"
#hardware="x86_64-pc-linux"
#hardware="i686-pc-linux"




##################################################################################
## non modificare da questo punto in poi
##################################################################################




pageold="http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/$hardware/archives"
prelinkold="http://download.oscam.cc/index.php?action=downloadfile&filename=oscam-svn%s-$hardware-$tipo.tar.gz&directory=1.20_TRUNK/$hardware/archives&"
page="http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/$hardware"
prelink="http://download.oscam.cc/index.php?action=downloadfile&filename=oscam-svn%s-$hardware-$tipo.tar.gz&directory=1.20_TRUNK/$hardware&"




r_flag=
h_flag=
o_flag=




while getopts "ohr:" opt; do
  case $opt in  
       o)    o_flag=1; page=$pageold; prelink=$prelinkold ;;
     r)    r_flag=1; rev="$OPTARG" ;;
     h)    h_flag=1 ;;
  esac
done







if [ ! -z '$h_flag' ]; then
  printf "\nUso: $0 [-ho] [-r revisione svn]\n\n\
Esempi:\n\
 $0 -h        # Visualizza questo messagio ed esce.\n\
 $0           # Scarica e installa l'ultima revisione svn\n\
 $0 -r 10200  # Scarica e installa la revisione 10200, se presente.\n\t\t\t- Provare con -or 10200 se fallisce.\n\
 $0 -o        # Scarica e installa l'ultima revisione svn in archivio\n\
 $0 -or 9800  # Scarica e installa la revisione 9800 che si trova in archivio\n\n"
 exit 0
fi




cd /tmp




if [ -z '$r_flag' ]; then
 wget -O page.tmp $page
 rev=$(grep -m1 -o -E  "oscam-svn[[:digit:]]+" page.tmp | sed 's/^[^0-9]*\([0-9]*\).*$/\1/')
fi







filename="oscam.tar.gz"
extract="tar -xvzf $filename"




echo "Scarico la oscam-svn$rev ..."
wget -O $filename $(printf $prelink $rev)




if [ -f $filename ]; then
  echo "Estrazione oscam-svn$rev-$hardware ..."
  $extract
  if [ -f oscam ]; then
     echo "Estrazione riuscita"
     echo "Interrompo Oscam..."
     $oscamstop
     echo "Copio su $oscambin"
     cp -f oscam $oscambin  > /dev/null 2>&1
     echo "Avvio Oscam ..."
     $oscamstart
  else
     echo ""
     echo "Errore estrazione"
     echo "Revisione non presente ?"
     if [ -z '$o_flag' ]; then
        echo ""
        echo " provare con: $0 -or $rev"
        echo ""
     fi    
  fi
else
  echo "Errore download"
  echo ""
fi







rm page.tmp  > /dev/null 2>&1
rm oscam  > /dev/null 2>&1
rm $filename > /dev/null 2>&1
cd ~

Font: brainless

Hi some current update script oscam?

as I can put a script to automatically update version oscam in my receiver DM 800 HD SE ?

Greetings.