Let me know how you get on.
I can have a go for you if your unsuccessful or haven't the right cable (still passing through your town twice a week)
P.M. me if you need assistance.
Thanks Codar but have a read of this first . The rs232 cable i used cured an "ASH " problem on an Ariva box before so i presume its ok , these are the steps i took .
i downloaded both files to my desktop and ran the erom upgrade tool 2.0.0c 2009-05-22
i left the settings alone i.e
PORT = COM1
Bits Rate = 115200
Parity = Even
Operate Mode = Upgrade
i then entered the abs file from my desktop that i downloaded i.e " A250Combo 20151012 v1.27B9 ABS " the file size was 8.00 mb into the section that says " Browse " beside it .
i ticked the box to include Bootloader . ( not sure if this was right or wrong but tried it ticked and unticked but with no success )
i then clicked " Next " and when the " synchronising STBs...Please reset target " sign came up on the next screen i powered off and on the box using the rocker switch at the back but nothing happened , the screen just stayed as it was with no kick out of the box or no information changing on the screen apart from the " synchronising STBs...Please reset target " still on the screen .
i was wondering if i have the right settings inputed as i didnt change anything from what was on the original settings , i also tried different abs files with the same result and even tried changing the PORT settings to different ones like COM2 and COM3 etc but with no success . i think the motherboard of the box could be knackered but you would have a better idea if this is the case than i would .....
i went through the process step by step so that you might spot what if anything i done wrong and it might also be a help to others as i couldnt find instructions anywhere in English as to the steps involved and what settings to be entered etc , there was german instructions alright but i couldnt find english ones anywhere , a step by step guide in English if anyone had the patience to write it out or if there is a link to it somewhere would be great in this section but in the meantime If you can see what i might have done wrong let me know or maybe i should just give up the ghost at this stage ,...thanks again .