Posts by abu baniaz

  • epgsearch is not updating properly

    If your network mount is mounted correctly, I don't know why it is not being offered as an EPG storage location. Maybe it was offline at boot time or timing issues. Best to add a local storage device:- USB, SD


    Also, I forgot to say, for your Terrestrial channels (received using an aerial), you will have to zap to them regularly to absorb the EPG. You can install EPG refresh plugin to do that for you. Or set a terrestrial channel as a startup service.

  • epgsearch is not updating properly

    Do you have a storage device connected to the receiver? HDD, USB flash drive? Is it mounted properly?


    You should not have changed most of those options from the default. Please change the load, save, refresh options to default.


    PS

    There is a link to guide to take screenshots in my signature.

  • FBC tuner

    If you get a Unicable LNB/switch, then answer will be yes.


    There is no "one FBC" tuner, it s a group of "8 tuners". So by one FBC tuner, if you mean one FBC module, then lets go with that. I presume the channels you want to record are all one satellite.

  • FBC tuner

    People always ask how many channels can I record. If you ask, how many transponders can I record, that gets rid a lot of the misunderstanding, although there will need to have more details later.


    Single tuner (not FBC) plus universal + Single signal supply = You can view/record one transponder. You will comfortably record/view 12 channels without a problem. Excluding encryption issues


    Multiple tuner (not FBC) plus universal LNB + Single signal supply = You can view/record any one transponder + one more on same plain(quadrant). Universal LNB is locked into high/low, vertical/horizontal plain


    Multiple tuner (not FBC) + multiple universal LNB = You can view/record any two transponders if you have two tuners. The LNB ports are independent are each will do what it needs.


    As an example, if you have a single Terrestrial tuner. You are locked to one transponder/multiplex. You are not limited to one channel. You can record all the channels on that transponder/multiplex. For the UK, as an example, most people will be able to simultaneously watch/record BBC 1 HD, BBC2 HD, ITV 1 HD, Channel 4 HD,



    FBC tuners do not need unicable and will work with universal LNBs. You wont get full benefit. I have got to 30 channels using a universal LNB.


    An FBC tuner is 8 tuners. 2 have signal wires connection points , other 6 do not.

    If you use a Unicable LNB/switch, you can record as many transponders as you have tuners configured. It is not 8 channels, it is 8 transponders


    FBC Tuners + single universal LNB

    You can record from any one transponder. The other 7 tuners will work in loop through mode. So you can record as any channels as are on all those transponders


    FBC Tuners + twin universal LNB

    You can record from any two transponders The other 6 tuners will work in loop through mode. So you can record as any channels as are on all those transponders

  • looking for Danish picons

    I don't know whether tsimage supports SNPicons. Please upload your lamedb file and I will add the references if I can work them out. Ye those picon packages are large because they do many satellites/cable/terrestrial positions. They can be made smaller if you use a lamedb file when building them.

  • looking for Danish picons

    Install the plugin called "missing picons", run it, upload the output it creates in /tmp directory.


    Also upload your lamedb file. It is in /etc/enigma2 You may need to zip it before you upload it

  • [Samur Private OSCam] - Request for compilation, questions and help !!!

    Quote from thecrazybandit

    Please can you confirm what is the correct bin file for a ZGemma h9 twin . Thanks

    Arm

    Thread
    OSCam For sf8008 and others [ boxes_Arch:arm ], [Private build]
    a full version with (libcrypto,libusb,pcsc,emu) ;
    the version with pcsc support if not running then install libpcsclite1 on your stb before installing oscam ;
    (Code, 4 lines)



    List of STB's:
    Octagon SF4008 4k
    Octagon SF8008 4k
    Octagon SF8008 Mini 4k
    Octagon SX88 4k

    ###
    Ax / Mutant HD 51 4k
    Ax / Mutant HD 60 4k
    Ax / Mutant HD 61 4k
    Ax / Mutant HD 66 SE 4k

    ###
    Edision OS mio 4k
    Edision OS mio+ 4k
    Edision Mini 4k

    ###
    Gigablue Quad 4k
    Gigablue UE 4k

    ###
    Zgemma H7C 4k
    Zgemma H7S 4k
    Zgemma H9 combo 4k

    ###
    Dreambox 900 4k
    …
    samur


    Compatibility list for checking and links

    Thread
    OSCam-EMU Device Compatibility List and Links !!!
    linuxsat-support.com/cms/attachment/204764/



    As on the title we will make a compatibility list for a large number devices used.
    This list will help determine which OSCam binary you need for your device or STB.


    Clicking on the icon to the left of your receiver will take you to the correct oscam for your receiver.


    ###
    We ask for everyone to get involved and help contribute in making a complete list that will help everyone find which version they need for their receivers.


    …
    samur