The FBC tuners always output a voltage on the Vu and Gigablues. You can setup a power timer to put receiver into deep standby if you want to switch off power.
Posts by abu baniaz
-
-
No. It is not a 4K receiver.
-
It seems that car123 has done something better. He has attached the wires from the motorised dish to the new FBC tuner. This means that his tuner configuration does not have to be changed because the motorised dish is still connected to his tuner I.
When his installer connects the two wires from the 39e dish, tuners Q and R can be set as simple, single, 39e.
-
All that you need to know is:
1. the tuner letters will change when you add the new tuner card. Set them again.
2. Make sure you do not set satellites that you cannot receive on the tuner connected to your motorised dish. I.e 39e. That way the receiver cannot use the motorised dish for it. If will use the fixed dish for 39e
Wiil be good to show this thread to your installer.
-
Display More
Thanks that helps with those new to the boxes.
But IMO it is confusing as f*#k
VU should have kept it simple and labelled it slot 1, 2, 3.
IMO e2 also gets it wrong.....the single/double tuner slot (aka "Tuner C") should always be labelled as Q and/or R and not changeable to I and/or J if using the middle slot.
For example with my STB:
i have a twin FBC tuner in tuner slot A (but normally have disabled it within the tuner configs.)
I have nothing in tuner slot B
I have a twin tuner in tuner slot C which is in use, and those come up as tuner I and J - just as you have pictured.
Agreed about identifying the tuner slots. This is nothing new, it affected old/ original/ non-4K Ultimo and Duo 2, so you 'd think they would have learned.
Not so sure about the tuner letters. It is always incremental, just like the person who had the loose tuner card in his Zgemma. Also, what about someone using the MTSIF Terrestrial tuners? They are only two tuners. So starting slot B from "I" could confuse issues more. And even then what would happen to USB tuners? Always start at "S"?
BTW, there is no such thing as single FBC, it is always a block of 8 tuners for satellite and cable, two with physical connections. Also, It would be better to use the FBC tuner instead of the legacy satellite tuner.
-
I don't understand what you are asking car123
-
Have you received and installed the extra tuner and dish yet?
If the motorised dish cannot revive 39east, deconfigure 39e on the tuner connected to the motorised dish. That way it will only use the fixed dish, there is no need for priority setting changes. In any case, the default settings mean that the fixed dish will be used before the motorised one
-
When you add the second FBC tuner card, this will be the hardware.
You will then need to re-set your tuners. This can be easily done by editing the settings file, otherwise use the remote.
Please do NOT alter anything on the vbox positioner as you might mess up the saved positions.
-
This is the current tuner hardware
-
PLi don't make images for that receiver. Ask the image builder to rebuild the plugin and upload on their plugin server. Alternatively install ATV and get it off their server. However, ABM won't build on python 2 images now. Getting it off the newer image it won't run on older one.
Or just manually update the provider file. What are you trying to solve by newer provider file.
-
Which image are you on?
-
It is not latest. If you want latest, download the binary for your receiver and rename to match existing name. Then replace the existing 11718 one.
However, when we last tried it there were issues with it.
-
Samur's one is the only publically available one with the UK Icam patch.
-
Try here:
https://openpicons.com/picons/
-
Thanks. I was after the source logos, not created picons.
-
Are good quality logos for following channels available? These are for purposes of adding to Ocram's github project. Thanks in advance. The ones on the official website are not very good.
https://canaleitalia.it/canali-old/arte-italia-124/
Italia 121,
Arte Italia 124,
Arte Italia 125,
Italia 126,
Italia 127,
Italia 134.
Italia 135
-
Openmultiboot hardly ever worked with PLI being the image on internal flash memory. Try ATV/OBH/ViX in flash memory.
-
Contents of HDD are independent of image. If you swap the HDD, there is no need to reflash image. After you add the HDD, format (Linux term is initialise) it in ext file system if it is staying in box.
There are barely any gains in using an SSD on an Enigma2 receiver. Don't change it for sake of change. Lower power consumption, noise, and speed for ad-hoc searches are probably only gains.
-
If you are using openatv, install the softcam/secret feed. Then install from plugins menu.
-
Posting here just in case it is needed by others assisting.
He says that his hardware is setup as pictured. He has a Sky 28.2 dish as well as the motorised one. The motorised one has a two port LNB.
The dish was aligned by someone else.
The following positions were programmed on the Vbox
39 east___Position 1
23.5 east___Position 2
19.2 east___Position 3
16 east___Position 4
13 east___Position 5
9 east___Position 6
4.8 east___Position 7
1.9 east___Position 8
0.8 west___Position 9
30 west___Position 10
