Sky ITA transmits epg of the sat channels 24 hours late on the real programming, for some years it has removed the plots of the films and leaves only the genre, the actors and the year of release of the film now this other problem created only for the sat decoders not sky. to load epg into enigma 2 i use epgimport . I wanted to know if anyone is working on solving the problem or is there any better plugin than epgimport that has already solved this.
thanks 
Yes thanks I installed both OE 2.5 and 2.0 images also pyton 3.11 and if they are basic images they all start, some backups don't work, I still solved several problems with dreambox 900 uhd and I must say that most probably the Dreamelite and the best OE 2.5 image for this decoders.
Hello and Merry Christmas, I have a few questions about the DM900 UHD.
I also have a DMONE that I mistakenly erased the bootloader of and now I have to use it with the boot written to the sdcard .since there doesn't seem to be any way to write it back to the boot flash.
About the dm900uhd, I have to say that I have been using it for years with OE2.0 images, and now I'm testing it with OE2.5 images,
which are little developed because closed developed only for the Dreambox. i tried MERLIN, DREAMELITE, NEWENIGMA2.
all OE 2.5 and each one has different defects, and among the 3 I preferred the DREAMELITE 7.1, which also allows me to use the black cam of tvsat which works perfectly only with dreamelite.
The problems I encounter with Dreamelite 7.1 OE 2.5 (and also OE 2.6 on dreamboxone) are the following ncam installed via deb file in temp it works perfectly but at each restart it must be reactivated, if it is set to automatic restart it does not work anyway. as for hardisk I can't format it and mount it, recordings and timeshift don't work, the epg allows me to load only one type if I want more countries or channels one resets another epg import it is better set to oe 2.0.
I would like to ask, since I use the barryhallen and in flash there is dreamelite 7.1 OE 2.5, also mounting OE 2.0 images in multibbot, will they work correctly or will they have problems. 
Buongiorno qualcuno sa come posso programmare il mooltiboot enigma2 del Qviart Dual,
Non riesco ad inserire piu di un firmware nel mooltiboot. dato che mi scrive solo lo slot 1 e non capisco come si possa cambiare slot,e la visione degli slot si ha solo dal sitema android col sistema enigma 2 si vede solo immagine installata, e non c'e mooltiboot selector come per altri decoder tipo zgemma o gigablue nella parte enigma2,si deve installare?
dato che vorrei mettere pure2,openpli, opnatv .
Hello anyone knows how I can program the Qviart Dual mooltiboot enigma2,
I can't put more than one firmware in mooltiboot. since it only writes me slot 1 and I don't understand how you can change slots, and the vision of the slots can only be obtained from the android system with the enigma 2 system you can only see the installed image, and there is no mooltiboot selector as for other decoders like zgemma or gigablue in the enigma2 part, do you have to install?
since i would like to put pure2, openpli, opnatv. 
Hello I installed cccam2.32, ncam, oscam in my gigablu trio 4k with openpli 8.1 with cline I see the Movistar + channels at 13 east, but these 3 channels, VAMOS BAR, VAMOS BAR1, VAMOS BAR2 are not visible and I noticed that it appears to me the seca coding is active on these channels that are not seen, while for the others only nagravisio and can be seen, I don't know if you need a specific cccam prio or alro x ncam and oscam.
I RESOLVED BY HAND INSERTING THE OPENVPN FOLDER IN THE ETC ON WHICH I INSERTED THE VPN CERTIFICATE ATTRIBBUTS 777 AND THE KEY TEXT FILE WHERE I AM USER AND PASSWDORD X THE CERTIFICATE VPN, AND IT'S ALL OK THE DECODER CONNECT WITH THE IP OF THE VPN.
GOOD evening I have a problem with cccam and zgemma h2h.
doing online update of the decoder, it passes from version 6.1 to 6.2 and deletes the cccam cfg, I write it in the cfg of base that creates, I delete the cfg.ogpk that has been created. but updating the online decoder again, change the cfg to the default one and create cfg opgk, which slows down the cccam if you do not delete it. depends on what.:cursing::thumbup:
Hello, I have problems with this command for openpli, you need to activate openvpn and create a directory in etc / openvpn where to enter the openvpn certificate and user and password to navigate the decoder connected to the openvpn server.
INSTALL OPENVPN ENIGMA2:
opkg update
opkg upgrade && install (the second line only if you have a sim a8p)
opkg list | grep vpn
opkg install openvpn
update-rc.d openvpn defaults
opkg install kernel-module-tun
I have always written with telnet on OPENPLI up to version 6.0, now in 6.2 in etc / no longer creates the openvpn folder where to enter the certificate and user and password.
Hello dragonfire , can you post the image italysat 8 in this thread? I want to test this image for my Sunray 800se 2.10 ssl84d monotuner, thank you!
you have to take italysat from their site because you have to be registered and make a contribution.
because when you install it to the setting of the image it generates the key only with your user and pasword and then registers it in one of the 5 tokens that you have available and continues the installation, then (I always have to restart the decoder, because do not recognize me registered, after reboot yes) download tuner sat drivers for clone with green button and then red.
this operation I do not think is necessary, but I want itaysat that the sat works. the dtt drivers of the a867 usb key are already installed.
with blue button and then red formatted usb stick and partitioning. from the plugins (menu, plugins) I install the moltboot, and then opepli original, part and sept as I want and download the xlmimport plugin and the file and sept epg which is now in xz format.
I resolved by flashing itlysat 8 original and putting the moltboot of italyast, I put the original openpli x 800 SE, clone and put everything, the dsriver x usb to 867 are already installed in italysat, and epg download from the updated panel and update online image everything ok
on dreambox 800SE original or sim a8p with openpli the firmware is updated from the menu and the rytec.sources is updated in xz format and loads all the selected sources.
I have problem with clone sim 2.10, even inserting the new rytec.sources, it does not load the epg selected and as if it did not process the file format xz.
what can i do with dm 800se clone and openpli 4 to have working epgimport
xmltvimport (1.0 + git110) in openpli is called.
hello Houara for your img for clone. I ask OpenPLi sim 2:10 800se without openwebif, since it occupies a lot of space, and if the uninstall, the img does not work.
I have big problem with oscam dm 900 4 kec line, oscam works well with tvsat, RSI1 cline from movistar to astra, sky German by astra, but does not work RSI2, adult channels of Hotbird and polsat channels of Hotbird, c same line and cccam 2:21 okay
- - - Updated - - -
when I go to open RSI1, and then I go on RSI2 it opens for about 10 seconds RSI2 with the key cache RSI1, what's missing to the sound operation oscam oscam-svn11311-arm_dream900-WebIf-emu-patched, and dm 900 4 k.
Original oscam was oscam_11272 changed var / bin with oscam-svn11311-arm_dream900-WebIf-emu-patched, but renamed oscam_11272
I need extra url or softcam ipk installer for openatv 5.3, to use of dm 900 4k
I think enigma 2.2.thanks
password please
the EPG is ok .entrando in plugins with red delete button from exstensions xlmtvimport, exit green button, and download from exstensions, xlmtvimport, and xlmtvimport reytec, without even restarting configure epg. only problem so far encountered, crash image if you try to open av configurations menu
it is not a clone vu + is Chinese .monta images vu + but do not know which model likely that you can install the drivers as a vu + combo sulquale were made to have 2 tuner dtt.come was also done for dreambox 7020HD combo . Drivers buddy during the launch of the IPK give error towards the end of the process.
cloud- ibox3 problem tuner dtt
I have a few days this decoder. the tuner dtt worked and badly does not work now .
I wanted to run the usb stick to 867 , but I can not , I have installed both a beckup Blackhole 2.0.9 Cloud Ibox3 Editon By Ferret, Italysat - 6.0.140 Ibox3 Universal Bootloader Streaming By Special Ferret, openHDF 24,072,014 Ibox3 Universal Bootloader By Special Streaming Ferret,
but the key driver there is no way to download them using any of these images. if someone has managed to do so could you explain how to do it thanks .: 06 :: 71 :: 06:
I updated my openmips 4.1 May online with the latest quad x gigablue.
I installed the ipk x can have download the softcam. I installed two cam, also the softcam manager
which is present in the directory / usr/lib/enigma2/python/Plugins / PLI /.
but in the blue panel is not present softcam manager, and everything seems to change a menu setting + detail.
