i am following this tutorial , but when i get to : sudo svn co oscam - Revision 5075: /trunk oscam i get an error message as follows.....debian:/usr/src# sudo svn co oscam - Revision 5075: /trunk oscam
svn: invalid option:
any ideas how to get past this? regards.......
I was having the same problem found out if you copy the orange section as a link then paste it will work after.
it dont show fully on the forum thats why!
update its working now! beer10
So the listen port was not set up correctly! :frusty:
right next is time to move to oscam!
do i just install it and thats it?
So the c line in the DM800 should be;
C: debianip 58781 user pass no
Right going to try that when I get in.
Thanks master g
That's the config file from the debian server and the dm800 I copied it to the box.
The card is been read via a card reader (infinity USB) on the pc debian server.
On the debian you will find CCcam.cfg in the folder /var/etc.
You can also put ypur CCcam.cfg in the folder home/cccam/ it will update when then debian reboots or you can run this update script.Code/emu/script/./configupdate.sh
On enigma1 receiver you will find CCcam.cfg in the folder /var/etc.
On enigma2 receiver you will find CCcam.cfg in the folder /etc.
right so all my config files are in the right place.
but is the config file correct?
let me also get something correct.
Where does my config fill go into the debain server
is it...
EMU/CCCAM/
and the dreambox is where?
am runing enigma2
Display MoreH-Magic ,
Please post your config files for cccam but obviously omit any boxkeys etc along with any c & f lines . A quick way to check if cccam is in fact running in debian is to open a command window in a program such as putty. Once logged in to debian server as root isse the command "top"
Look at the running processes to confirm cccam is running firstly.
If you confirm cccam is 100% running then your error must lie in your cccam.cfg either from the debian end or from the dm800 end.
Hope this helps
regards
t
what am I looking for?
Thank you all for your help
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : yourchoice
WEBINFO PASSWORD : yourchoice
TELNETINFO USERNAME : yourchoice
TELNETINFO PASSWORD : yourchoice
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
#OSD USERNAME : yourchoice3
#OSD PASSWORD : yourchoice3
OSD PORT : 80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
EMM THREADS : 1
#smartcard
SERIAL READER : /dev/ttyS0
SMARTCARD CLOCK FREQUENCY : /dev/ttyS0 3570000
TRY ALL CHIDS : /dev/ttyS0
BOXKEY : /dev/ttyS0 ** ** ** **
SERVER LISTEN PORT : 58781
#MINIMUM DOWNHOPS: 1
#LOG WARNINGS : /tmp/warnings.txt
F: user1 pass1
C: ip addy 12000 user1 pass1
hi all :thumb:
right ive been on this thing nearly all weekend! joint2
My setup is an old pc installed debian and runed the script as per guide
http://linuxsat-shares.com/lin…-auto-install-script.html
and trying to get it up running on my dm800hd
Am getting free channels on the box and none of the paid ones are showing.
Am using a Inifinity usb reader and got it up and running well it looks like its running!
Can someone have a look at my config file please as thats the only problem that may cause it plus 500 other things!
But am trying to minimize my problem
How are you getting on with this now?
Thanks dude. Will try it out tonight.
Watch this space
Hi how do I get an infinity USB Phoenix card reader to work with debian.
I don't really won't to buy a smargo reader.
Also what MHz is a sly card read at?
I've installed the debian and followed the guide which is up and running but am missing a card reader to test the whole thing to see if it's all working.
You mean subnet mask?
Easiest way to find out is to go
Start
Command (win7 start search cmd)
Type in
Ipconfig
Or
Ipconfig /all
You should see your subnet mask
Normaly
255.255.255.0
Excellent.
Thank you
Thanks, what do these refer to please /dev/sci0
That refers to the files on the image location.
If you have a dreambox 500s you don't need a external card reader.
But others do.
I think 800hd you don't either.
Card reader if am not mistaken.
What box you running?
So say am with bt! I give them my bt ip adress?
Not my dreambox!
Right this is a total newbie question which is what iam but I just need to clarify.
The ip address you put on c lines it is your dreambox ip?
When you setup a dynds do you put the ip address of the dreambox,pc or router?
Reason I ask is when I test my port forward on port forward.com it says it's wrong.
So I've setup a port for my pc and it's fine now but I would have thought it would of had been for the dreambox!
I would also like to thank everyone on here.
I managed to get my dreambox up and running from scratch.
Am running
Dreambox 500s (think it's original)
Linksys wrt54gs router
And my pc
With sly dish with card
Thanks in advance.
