Posts by bodiddly

    Here are the specs:
    500 MHz MIPS Processor - Linux Operating System
    - Media Player
    - Downloadable Plug-ins supported
    - 2 x Smartcard Reader(Conax&Xcrypt)
    - MPEG2/H 264 Hardware Decoding
    - DVB-S2 Twin Tuner
    - 16 character DotMatrix VFD
    - 128MB NAND Flash/384MB RAM
    - Stable SMPS Intergrated
    - 10/100 Mbps Ethernet Interface
    - 3 x USB 2.0
    - RS232
    - HDMI
    - YPbPr
    - Composite Video
    - 1 x SCART
    - SPDIF for digital bit stream out (optical)
    - EPG supported
    - Automatic & Manual Service Scan Supported
    - Multiple LNB control (DiSEqc)supported
    - Skin Change Supported
    - Stable SMPS intergrated
    - Size (W x D x H): 195 mm x 140 mm x 40 mm
    - Power consumption: < 15W at 12V
    - External PSU Input:
    - 110-240V AC / 50-60Hz / 0,6A Output:
    - 12V = / 3,0A
    - Weight:1.7kg


    bo.

    Are you trying to access the box that you setup in your house? Did you take that box to your friends house? If so then your friends router ip and PC ip will be different to the ones in your house.


    bo.

    Thanx m8.I will give it a go and see how Blackhole handles over the next 24 hours.


    bo.


    - - - Updated - - -


    Sorry master G but it won't work in the blackhole image. It's not even clearing my cards.


    bo.

    After having trouble with both Oscam and CCcam in the Blackhole image( my Favourite). I have switched to the SatdreamGr image using Oscam 10948 for the last 24 hours and it has been perfect. But,there`s always a "but" when it concerns me,sorry. The epg is not working properly and my recorded programmes only play for seconds if at all.I`ve tried the mediaplayer and mediacenter. Same issue. Is it possible to get the ipk file of Oscam 10948 for the Blackhole image,so I can see if that version finally solves my issues? I`ve been searching but nothing comes up.


    Thanx.
    bo.

    Thanx for your reply backstorn,but I don't have a problem with the channels. My problem is getting cccam to clear BT sports using my card. Oscam does this no problem but after a few hours I get way too much glitching and have to restart it. That's no good for my server. Cccam runs great for me,the only problem is,it sometimes reads my BT card and sometimes (like now) it doesn't. Again,this is no good for my server.


    Thanx.
    bo.

    Ok I`ve been trying different setups and I`ve come to the conclusion it`s a CCcam problem. I disconnected my internet connection and found CCcam isn`t reading my BT Sports entitlements, but it reads all the Sky FTA I have. Oscam reads everything no problem. I don`t know why this is happening because CCcam has been stable for me for the last couple of weeks. I had to go back to using CCcam because the erratic glitching problem I had with Oscam returned,no matter which version of Oscam I used.
    Back to the drawing board for me.:59:


    bo.

    I'll give it a go. My question still stands though, if I totally disconnect my box from the Internet,shouldn't cccam or any emu still read what card is in the box?


    bo.


    - - - Updated - - -


    I've just noticed master G, you have the clock frequency at 3750000. I have it at 3570000. Which is correct?


    bo.

    I think 357000. I'm not at my of to see. Too busy watching our master class of how to lose your discipline


    bo.


    - - - Updated - - -


    I`ve just checked the clock frequency and it`s 3570000. Is this correct? The card is still freezing but my peers hd share is still freeze free.Weird.


    bo.

    I am about to watch the match on BT Sport using my BT Sport card. But it keeps freezing,so I thought it maybe getting overloaded on my server,so I thought I would disconnect my internet as surely CCcam should read my card without the internet? But it doesn`t. I also get the same freezing using Oscam.


    bo.

    I have the free no-ip and its setup in my router. I know longer have to leave my PC running with the no-ip updater 24/7 in case of an ip change.


    bo.