Hi,
how this works, just a exe on rar no other information.
Hi,
how this works, just a exe on rar no other information.
best thing to do with the vm superhub is to ditch the router/wireless functions
set it to modem only and use your own router with it.
That's exactly what I've done, wireless is absolutely rubbish.
Try this, Blue Panel=>Extra Setup and look for "Time" if time is set to Transporter change it to Internet save and should be ok.
This project has been shut down by his author.
I don't have a jsc card, tested on a nagravision card only, works ok but not much difference from oscam....
########################################################
### ###
###### NCam v0.3 Compiled: 28-07-2012 ######
### ###
########################################################
Changes:
- Added support for I*****.
- Added support for cryptoworks.
- Modified the part of CCcam, MAX / MIN connections, MAX / MIN ECM / EMM.
- Modified MAXHOP, reshare, IGNRSHR, STEALTH, reconnection times, etc.
- Major changes in general in the CCcam protocol.
- Added support for more number of clients / servers CCcam.
- Modifcados nagravision reader internal parameters (looking for more stability).
- Modified dvbapi reader parameters (looking to improve reading times).
New version just released:
NCAM: 0.2.1 Rev #1
QuoteDisplay More################################################## ######
### ###
###### NCam 0.2.1 #1 Compiled: 22-07-20012 ######
### ###
################################################## ######
NCam cardserver v0.2.1, build #1 ( MIPS, X86 )
Copyright (C) 2012 NCam developers.
This program is distributed under GPLv3.
NCam is based on OScam
Visit lonasdigital for more details.
------------------------------------------------------------
Features : webif monitor dvbapi pcsc loadbalancing
Protocols : newcamd cccam cccam_share
Readers : nagra seca viaccess videoguard
-------------------------------------------------------------
Compilados:
Ncam.mips enigma2 - Mipsel
Ncam.x86 Linux PC (32 bit)
Pendientes:
PENDIENTE1 - Ncam.ppc enigma1 - Power PC
PENDIENTE2 - Ncam.x86_64 Linux PC (64 bit)
PENDIENTE3 - Ncam.sh40 Enigma2/Spark - (qbox/ipbox/kathrein/Golden Media)
------------------------------------------------------------
Instalación NCam (Mipsel):
/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional
*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist
-------------------------------------------------------------
Intalación Ncam (Linux PC (32 bit):
/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/usr/local/etc/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional
*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist
-------------------------------------------------------------
Configuración de Ncam vía web:
Ncam Admin Control: information.com (192.168.x.x)
user: root
password: ldteam
0.2.1 NCAM Rev.1
changes:
- Added back the loadbalancing
- Modification of code in internal parts of the NCAM
-------------------------------------------------- ---------------
NCAM 0.2 Rev.1
changes:
- Removed all protocols except newcamd and CCcam
- Removed support for Cachex and anticascading and loadbalance
- Added support for NDS cards Videoguard
- Reviewed and corrected some bugs of novice
- Preset modified and improved initial
- Fixed code in internal parts of the NCAM
- Modified the time of connection to the reader at the beginning
**************************************************
NCAM: 0.2 Rev #1
QuoteDisplay More################################################## ######
### ###
###### NCam 0.2 #1 Compiled: 22-07-20012 ######
### ###
################################################## ######
NCam cardserver v0.2, build #1 ( MIPS, X86 )
Copyright (C) 2012 NCam developers.
This program is distributed under GPLv3.
NCam is based on OScam
Visit lonasdigital for more details.
------------------------------------------------------------
Features : webif monitor dvbapi pcsc
Protocols : newcamd cccam cccam_share
Readers : nagra seca viaccess videoguard
-------------------------------------------------------------
Compilados:
Ncam.mips enigma2 - Mipsel
Ncam.x86 Linux PC (32 bit)
Pendientes:
PENDIENTE1 - Ncam.ppc enigma1 - Power PC
PENDIENTE2 - Ncam.x86_64 Linux PC (64 bit)
PENDIENTE3 - Ncam.sh40 Enigma2/Spark - (qbox/ipbox/kathrein/Golden Media)
------------------------------------------------------------
Instalación NCam (Mipsel):
/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional
*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist
-------------------------------------------------------------
Intalación Ncam (Linux PC (32 bit):
/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/usr/local/etc/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional
*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist
-------------------------------------------------------------
Configuración de Ncam vía web:
Ncam Admin Control: information.com (192.168.x.x)
user: root
password: ldteam
NCAM 0.2 Rev.1
changes:
- Removed all protocols except newcamd and CCcam
- Removed support for Cachex and anticascading and loadbalance
- Added support for NDS cards Videoguard
- Reviewed and corrected some bugs of novice
- Preset modified and improved initial
- Fixed code in internal parts of the NCAM
- Modified the time of connection to the reader at the beginning
So can we be clear, which card does Ncam decrypt ?
Ncam only decrypts Nagravisión, Viacces and Seca cards.
New version will decrypt NDS Videoguard.
The start script for the cams is included in the IPK, the script would have been installed to /usr/camscript/
The new image has a new architecture, scripts go to usr/script the folder camscript does not exist any more, the script created with the ipk doesn't work that's why I ask for the script.
Leave you a attachment with a cccam 2.3.0 script that works with this image, as I'm not a linux expert can't edit it to work with cccam/oscam.
But probably you need to revise the location of the script.
Regards
I've another question, where can download the script to start both cam's?
Thanks
I tested this myself and get the same error on dream elite addons, all other files are fine.
Thats right just dream elite.
I'm using the new DE v3 image on my DM800 and today I try to download Cams-Dream Elite Oscam 6408+CCcam 2.1.3 and always get "Failed to download error detail http response code said error"
Is any problem with the server, try to download other cam's and get the same result.
Thanks
Would be nice to have this in English.
Dream Elite 4.0 is not out at all.
Display More!! NEW Dream Elite 4.0 NEW !!
COMING SOON
DM500hd DM800pvr DM800se DM8000
This's for all models not just for the ones mentioned above.
Not able to download from 4shared any other link???
Tks
Why don't you change the 16001 to something else....
I've a long wait, between October and June 2013joint10
Thank you for your answer, but why is creating 2 log's?