OpenATV 7.4 and 7.5 devel not work with multistalker 1.5, only work with multistalker pro right?
I have both versions on my vu+solo4k with openatv7.4 and 7.5dev build
How did you install the Multistalker 1.5 version?
I already tried to install to IPK and Telnet but I was unable to do so.
MultistalkerPro installs without any problem.
OpenATV 7.4 and 7.5 devel not work with multistalker 1.5, only work with multistalker pro right?
I've done this and it doesn't work.
Install the oscam-emu emulator from the feed.
Rename the file oscam-11727-799.armv7-libusb-pcsc to oscam-emu, load it to /usr/bin/, give permissions (755), restart oscam or reboot the box.
Please note oscam-emu does not have a bin extension.
OK!
First of all I wat to ask a question:
Does this softcam allow/work with Oscam lines, how does the softcam MOHAMED_OS or Oscam Trunk 11727?
I installed the softcam using the feed
Then I renamed oscam-11727-799.armv7-libusb-pcsc to oscam-emu and installed it in the folder /usr/bin/ with attributes 755
But after everything is installed in the tuxbox section the new softcam does not appear, only the oscam trunk appears.
If I delete the oscam trunk bin, the box stops working and does not open any channels on Hispassat.
Do you understand?
In the past I have installed other softcams this way, I replaced the old bin with new one, renamed it and everything was ok, with these SAMU softcams, not able to do that.
I know this softcam was compiled to work on OpenBH, OpenVix and OpenPLI images, and I'm trying to get it working on OpenAtv 7.4 (beta)
Is this why it doesn't work on other images?
I place the bin file in /user/bin, delete the old file
You don't have to delete or remove the original one from MOHAMED_OS, just rename it as oscam_11727-emu-r799_old.
Take an example, oscam-11727-799.armv7-libusb-pcsc
first rename for example up to oscam-11727-799 leaving out ".armv7-libusb-pcsc" you will have oscam-11727-799
Then copy or use the name of the original, and push it usr/bin directory, give it attributes 755. You may reboot or restart the oscam, and you are ready to go
I've done this and it doesn't work.
This bin only work in OpenBH an OpenPli images or work in all images?
when you put the new one in /usr/bin you have to rename it with the same name as the old one, otherwise it won't start
Yes but dont work
Someone can help me?
I have an Octagon SF 8008 4K
I have the softcam version MOHAMED_OS (enigma2-plugin-softcams-oscam_11727-emu-r799_all.ipk)
But now I wanted to install the Samur version bin,.
I've already tried installing these four versions (one at a time)
oscam-11727-799.armv7-libusb-pcsc
oscam-11727-799.armv7-libusb
oscam-11727-799.armv7ve-libusb-pcsc-aio
oscam-11727-799.armv7ve-libusb-aio
But they don't work
I place the bin file in /user/bin, delete the old file, give the new file attributes 755 but then I can't activate the softcam on the box.
If I put old bin version (MOHAMED_OS enigma2-plugin-softcams-oscam_11727-emu-r799_all.ipk), back, I can start the softcam again.
Can anyone explain to me how to do it?
Hello!
Can anyone tell me if is possible install the Wireguard VPN Plugin on Define OS?
If it is possible how to do this?
For me this your solution not working.
Use the DreamSet 2.4.4 program and in the SETUP put de nex configurations:
Configuration Title ---- SetBox 1
Box IP ------Use Your IP BOX
User Name-----root
Password-----root
Firmware----Costume
Software------ Enigma2 ver4
Satelellites.xml------/home/gx/local/enigma_db/
Services. Bouquets-----/home/gx/local/enigma_db/
Telnet usage--- Prompt user when HTTP fail
The STUP tab settings must be as they are in the photo
To me works fine.
Are you really using my image or do you want to add another image to multiboot? If you use I'll find time and fix it, but if you just collect images then there's no point in adding this because I'll just waste my time. . .
Yes, I have your image installed.
With wireguard v._6.4 it works fine, if download version 6.8 give an error.
If I instal wireguard v._6.8 or 7.0 per ipk it also gives the error that you can see in the fhotos.
If I reinstall the image and do it all over again it still gives me this error.
Hiperyon image 9.3 not support the wireguard 6.8 or 7.0 plugin version why?
Olá, ZICO, tentei instalar algumas versões disponíveis neste fórum. Nenhum deles funcionou. zgemma h92s openatv 7,3 armv py3... alguma chance de obter o ipk certo para minha caixa?
openatv 6.4 6.5 img
A tua box é esta, certo?
Se a versão da box é esta e a imagem que utilizas é a OpenAtv 7.3, a versão do multistalker que tens de utilizar é esta:
enigma2-plugin-extensions-multi-stalkerpro_1.0+git16+ab1d5a0-r0_cortexa15hf-neon-vfpv4
Instala isso por IPK o usa o AJPanel v8.8.8 que tem de dar
Hi... someone are using the plugin with the new egami 10.4?..have notice some bug...like some block After using green button to return to main menù?
I use this plugin in Egami 10.4 and the plugin work fine!
Wath box do you have?
I need open atv 7.0 ipk friends
OpenATV for IPK?????!!!
Aren't you mistaken?
Wat you should is an OpenATV 7.0 backup.
OpenATV IPK doesn't exist
Display Morethere is error when i tried to install it
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
octagon sf8008
openatv 7.2
MultiStalker pro whit this box and OpenATV 7.2 or OpenATV 7.3 work very fine
Use this version of MultiStalker and install with AJPanel 8.8.8
I just read your last post on the other thread and seen you are using OpenViX.
In that case the oscam binary should be in /usr/softcams not /usr/bin
Now Oscam OSCam-11724-798 (armv7ve OpenSSL-1.0.2 libusb) appears and work, but de option streamrelay no:
I give up!
Heve no patience.
I see this on multistalker pro
Thank you for the help.
Try starting oscam in telnet with /usr/bin/oscam -b
If the image is missing something it will throw out an error.
It still doesn't appear:
https://files.fm/u/7cqa7rqq38
Can anyone tell me the correct an quickest way to install this?
How were you trying to install it?
Its only a binary, so you need to manually overwrite the existing oscam file using an FTP tool. Give the correct 755 permissions and rename the oscam to the same as the existing version so the softcam manager can start it.
I do download Oscam here:
Unzipped the file an with DCC send to user/bin
The attributes 755
Renamed the file to oscam
But I don't any this in the box.
doesn't appear the OSCam-11724-798 (armv7ve OpenSSL-1.0.2 libusb)
Only see the version that already had in the box
What appers is this:
Seriously!!!!!!
I'me already stressing!
I've been trying to install OSCam-11724-798 (armv7ve OpenSSL-1.0.2 libusb) for several hours but I'm not succeeding!
Can anyone tell me the correct an quickest way to install this?
I apologize for my ignorance, but can someone explain to me how and where to place whitelist_streamrelay on Openvix.
I don't understand much about this image.
I already tried to upload whitelist_streamrelay by ipk but it didn't work.
The Oscam emu I use is this one:
enigma2-softcams-oscam-all-images_11.725-emu-r798-arm+mips_all.ipk
Is the correct version?
To test, I installed OpenPli 9.0rc.
Then installed the plugin
Restarted the box but I can't access the servers or anything else.
The internet connection is ok, so it could only be a plugin error.
My box is Octagon sf8008
Display MoreOpenVIX, OpenBH and OpenVision images have a problem and do not boot when installed on some SD-cards or USB-drives.
If you change the model of the SD-card, there is a chance that they will work.
The solution is to install them in the flash slots of your box. And here, too, they may not boot.
If this is the case, disconnect the card and/or USB, boot the image and then reconnect them.
I have them all installed on the SD-card and they work great.
These are my settings/images and everything works fine.
On my Octagon SF8008 I have the following images installed: OpenATV 7.3, OpenHDF 7.3, OpenBH 5.3, OpenVix 6.4, Pure2 7.3, Hyperion 9.3, OpenDroid 7.3 and OpenSPA 8.3.
All these images are Py3 and they work impeccably with me.
