(Alex-coreelec)Orr Coreelec is More Better - New Version of tvheadend ..
My Recommend to Alex Coreelec 8.99.09
I tried Alexelec and coreelec with
1)166e. Science Southeast Asia ,DMAX Southeast Asia, Eve Southeast Asia channels
I can't audio language . English audio only.
2)91.5E . History H2 FYI channels No picture On audio. when I setting audio stream = IGNORE . Picture and Audio Work. But after 1 min. TVH is Restart.
3)105.5E same 91.5E
991231f112ce1c.png
:06:
This is Ncam 7.1..
(Ncam rename to oscam)
Thx Bro...
Where is Ncam 7.1 download link?
:hello:hello
Which box can I run Tvheadend on?
Wetek Play2, U5pvr, Dinobot 4K
exit ,back, menu botton not working.
I can't to setup network .
Hi. mtahirghauri
Can you build Enigma2 for Vim2+VTV Board?
Can you upload a new Oscam manager with latest build ? Svn11395?
Copy folder Android inside sdcard folder to your wp2.
DirConfig= /sdcard/android/data/com......oscam/conf/
how to copy folder to wp2 as ftp did not work?
use Es file manager app.
Display Moreafter unzipping this file there are 4 files in it.
sdcard
build.log
install.apk
4th one i think bin file.
which file should i use?only apk?
transfer apk to usb
attatch to wetek and install via filemanager?
how about configuration will be done?
Hi.
Transfer install.apk sdcard to ubs.
Install install.apk
Copy folder Android inside sdcard folder to your wp2.
DirConfig= /sdcard/android/data/com......oscam/conf/
Display MoreDisplay MoreDisplay Moreafter installing gives an error,
config folder not found
Where are the config folder?
thanks
Please look below link
Can you upload a new Oscam manager with latest build ?
Yeah!!!! sure.
8o8o8o
Display Moreafter installing gives an error,
config folder not found
Where are the config folder?
thanks
Please look below link
hello,
to install oscam in wetelplay 2, we unzip the file to usb and we need only instal da apk file?
thanks
Yeah.
Display MoreHi perrypay
Tvheadend with Weos v2.0.2can you explain what step to running weos v2.0.2 and tvheadend at the same time???
you step like this???
1. flash Weos v2.0.2
2. reboot
3. flash tvheadend
4. reboot
Yes.This is my step.
Display MoreI have to downgrade to weos 2.0.2. because i try weos3.1 with both wetv and tvheadend server 4.3 + oscam +smpc power vu channels have on sound and Tandberg channels not smooth.
But weos 2.0.2 with Ricardo's tvheadend server 4.3 + spmc , IPTV APP + Mxplayer-bsplayer ,Power vu and Tandberg Channels Work find. And confirm IPTV App by Alexander + km 4:2:2 - 4:2:0 Feed channels so smooth and perfect for me .
Sorry for my bad English.
;)8)
Hi rmiino ,
Are you running tvheadend with ricardopvz Android TV room??? Or you running tvheadend with Weos v2.0.2???
Hi perrypay
Tvheadend with Weos v2.0.2
oscam-1.20-unstable_svn-11392-emu-android-arm.zip
:D:D:D:D
Display MoreDisplay More1.reboot to recovery mode
2.flash tvheadend.zip >>> https://mega.nz/#!gqJzxBaA!3zS…e94pSfLMrYSJsJIR1d_SJNY_8
3.reboot
4.extrect >>> https://linuxsat-support.com/c…t/84950-tvheadend-4-3-7z/
5.copy tvheadend file to microsdcard
6. telnet to your wp2. and type the following instructions
stop tvheadend-mount -o remount,rw /dev/block/system /system
-cp /storage/sdcard1/tvheadend /system/bin/
-chown root:shell /system/bin/tvheadend
-chmod 755 /system/bin/tvheadend
-reboot
Install smpc
1.Enable tvheadend htsp client
2.system>tv>enabled
For 4:2:2 Sports Feed
1.Install IPTV APP >>> https://play.google.com/store/…remote.android.iptv&hl=en2.Install Km Player >>> https://play.google.com/store/…ils?id=com.kmplayer&hl=en
3.Open IPTV APP
4.Add stream url >>> http://127.0.0.1:9981/playlist
5.Setting>>>Streaming player>>>System select
6.Open Km player app
7.Setting>>> Hardware Acceleretion=Disabled
Force video chroma = RGB 16-Bit
Deblocking Filter settings = No deblocking(fastest)
8.Back to iptv app
9.Select 4:2:2 Channel and then select Km player for play stream.
:clap::clap:
Dear rmiino,
What app should I use to scan the signal of the Sport Feeds? WeTV orTvheadend?
Because I got a little confuse in point 8 and 9 in your tutorial.
Thank's and regards
Tvheadend, Bro!!!
http://yourwp2ip:9981/ for setting tvheadend
Display MoreDisplay More1.reboot to recovery mode
2.flash tvheadend.zip >>> https://mega.nz/#!gqJzxBaA!3zS…e94pSfLMrYSJsJIR1d_SJNY_8
3.reboot
4.extrect >>> https://linuxsat-support.com/c…t/84950-tvheadend-4-3-7z/
5.copy tvheadend file to microsdcard
6. telnet to your wp2. and type the following instructions
stop tvheadend-mount -o remount,rw /dev/block/system /system
-cp /storage/sdcard1/tvheadend /system/bin/
-chown root:shell /system/bin/tvheadend
-chmod 755 /system/bin/tvheadend
-reboot
Install smpc
1.Enable tvheadend htsp client
2.system>tv>enabled
For 4:2:2 Sports Feed
1.Install IPTV APP >>> https://play.google.com/store/…remote.android.iptv&hl=en2.Install Km Player >>> https://play.google.com/store/…ils?id=com.kmplayer&hl=en
3.Open IPTV APP
4.Add stream url >>> http://127.0.0.1:9981/playlist
5.Setting>>>Streaming player>>>System select
6.Open Km player app
7.Setting>>> Hardware Acceleretion=Disabled
Force video chroma = RGB 16-Bit
Deblocking Filter settings = No deblocking(fastest)
8.Back to iptv app
9.Select 4:2:2 Channel and then select Km player for play stream.
:clap::clap:
Dear rmiino,
How do you telnet to Wetek Play 2?
Thank's and regards
Flash tvheadend.zip
Can ftp to your wp2.
Display MoreDisplay More1.reboot to recovery mode
2.flash tvheadend.zip >>> https://mega.nz/#!gqJzxBaA!3zS…e94pSfLMrYSJsJIR1d_SJNY_8
3.reboot
4.extrect >>> https://linuxsat-support.com/c…t/84950-tvheadend-4-3-7z/
5.copy tvheadend file to microsdcard
6. telnet to your wp2. and type the following instructions
stop tvheadend-mount -o remount,rw /dev/block/system /system
-cp /storage/sdcard1/tvheadend /system/bin/
-chown root:shell /system/bin/tvheadend
-chmod 755 /system/bin/tvheadend
-reboot
Install smpc
1.Enable tvheadend htsp client
2.system>tv>enabled
For 4:2:2 Sports Feed
1.Install IPTV APP >>> https://play.google.com/store/…remote.android.iptv&hl=en2.Install Km Player >>> https://play.google.com/store/…ils?id=com.kmplayer&hl=en
3.Open IPTV APP
4.Add stream url >>> http://127.0.0.1:9981/playlist
5.Setting>>>Streaming player>>>System select
6.Open Km player app
7.Setting>>> Hardware Acceleretion=Disabled
Force video chroma = RGB 16-Bit
Deblocking Filter settings = No deblocking(fastest)
8.Back to iptv app
9.Select 4:2:2 Channel and then select Km player for play stream.
:clap::clap:
Dear rmiino,
Do you mean
Install spmc ?
Thank's and regards
Yes..
Thank you for detail reply, If I use that, then No more Android ?
You can back to flash weos 2.0.2
And flash tvheadend.
I manage to install Oscam manager 1.0.3 and make it work Cccam for few channels , few problems need your assistance, some time audio issue, few HD encrypted channel clears but show SD
Try to use weos2.0.2+tvheadend
Is it safe to downgrade weos ?
First you need to download this tool, to format your SDcard
https://www.sdcard.org/downloads/formatter_4/
Second you need to download these files 4 files
https://mega.nz/#F!0xhjkThL!2JCAgXaZZfCbQXzNogheDQ
If you download as ZIP file extract it until you get 4 files listed like this (Do not need to be in the same order)
- DB-J235-wetekplay2-master-ota-2017-01-19_17-46-13
- DTB
- factory_update_param
- recovery
Insert SD card in Wetek and let it install and boot.
>>> http://www.wetekforums.com/v/discussion/30515/play-2-bricked-after-going-back-from-android-tv-to-weos-solved#latest
