I manage to install Oscam manager 1.0.3 and make it work Cccam for few channels , few problems need your assistance, some time audio issue, few HD encrypted channel clears but show SD
Try to use weos2.0.2+tvheadend
I manage to install Oscam manager 1.0.3 and make it work Cccam for few channels , few problems need your assistance, some time audio issue, few HD encrypted channel clears but show SD
Try to use weos2.0.2+tvheadend
Display MoreDear rmiino,
Do you have any link for Ricardo's tvheadend server 4.3?
Thank's and regards
Yes.Sure !!!!
Dear rmiino,
Do you have any tutorial for installing tvheadend on WeOS 2.0.2?
Thank's and regards
1.reboot to recovery mode
2.flash tvheadend.zip >>> https://mega.nz/#!gqJzxBaA!3zS…e94pSfLMrYSJsJIR1d_SJNY_8
3.reboot
4.extrect >>> https://linuxsat-support.com/c…t/84950-tvheadend-4-3-7z/
5.copy tvheadend file to microsdcard
6. telnet to your wp2. and type the following instructions
stop tvheadend
-mount -o remount,rw /dev/block/system /system
-cp /storage/sdcard1/tvheadend /system/bin/
-chown root:shell /system/bin/tvheadend
-chmod 755 /system/bin/tvheadend
-reboot
Install smpc
1.Enable tvheadend htsp client
2.system>tv>enabled
For 4:2:2 Sports Feed
1.Install IPTV APP >>> https://play.google.com/store/…remote.android.iptv&hl=en
2.Install Km Player >>> https://play.google.com/store/…ils?id=com.kmplayer&hl=en
3.Open IPTV APP
4.Add stream url >>> http://127.0.0.1:9981/playlist
5.Setting>>>Streaming player>>>System select
6.Open Km player app
7.Setting>>> Hardware Acceleretion=Disabled
Force video chroma = RGB 16-Bit
Deblocking Filter settings = No deblocking(fastest)
8.Back to iptv app
9.Select 4:2:2 Channel and then select Km player for play stream.
:clap::clap:
Display MoreDisplay MoreOScam Android 4.1 From wetektr.com
Oscam emu 11359 From sat-support.tv
1. Extract OSCam.wetek2.rar
2. Install OScam Android 4.1
3. Copy oscam-EMU-11359.zip to /sdcard/Android/data/com.android.oscam/update/
4. Rename oscam-EMU-11359.zip to arm-oscam.zip
5. Open oscam app >> setting >> updates(Oscam)
:20_003:
It give me message after installation on my WP2 with 6.0.1, "Config folder not found /storage/emulated/0/android/data/com.android.oscam", so unable to open oscam app>>setting>>update
1.extract oscam.zip
2.copy android folder to usbdrive
3.use app es file explorer copyor replace android folder from usbdrive to wp2 sdcard/android
oscam-1.20-unstable_svn-11391-emu-751-android-arm
- emu 751 - Add Powevu hash mode 3 support
Display MoreDisplay MoreDisplay Morehi,
I have installed oscam like @rmilo wrote (thx very much for guidance)
I have in oscam status connected, not online like in tuner with enigma and no tv channels on wetv.
Do wetv needs special configuration or do You use diffrenet program on wetek play2 to watch tv?
OSCam: 1.20-unstable_svn Build: r11380 Compiler: arm-linux-androideabi-libusb
wetek play2 weos 3.1
Hi.
I have to downgrade to weos 2.0.2. because i try weos3.1 with both wetv and tvheadend server 4.3 + oscam +smpc power vu channels have on sound and Tandberg channels not smooth.
But weos 2.0.2 with Ricardo's tvheadend server 4.3 + spmc , IPTV APP + Mxplayer-bsplayer ,Power vu and Tandberg Channels Work find. And confirm IPTV App by Alexander + km 4:2:2 - 4:2:0 Feed channels so smooth and perfect for me .
Sorry for my bad English.
;)8)
Dear rmiino,
Do you have any link for Ricardo's tvheadend server 4.3?
Thank's and regards
Yes.Sure !!!!
Any other file required, or only transfer and install this ?
Only transfer and install.
How can I install this in box, Can I transfer it by USB ?
Yes.you can!!
Display MoreDisplay MoreDisplay Morehi,
I have installed oscam like @rmilo wrote (thx very much for guidance)
I have in oscam status connected, not online like in tuner with enigma and no tv channels on wetv.
Do wetv needs special configuration or do You use diffrenet program on wetek play2 to watch tv?
OSCam: 1.20-unstable_svn Build: r11380 Compiler: arm-linux-androideabi-libusb
wetek play2 weos 3.1
Hi.
I have to downgrade to weos 2.0.2. because i try weos3.1 with both wetv and tvheadend server 4.3 + oscam +smpc power vu channels have on sound and Tandberg channels not smooth.
But weos 2.0.2 with Ricardo's tvheadend server 4.3 + spmc , IPTV APP + Mxplayer-bsplayer ,Power vu and Tandberg Channels Work find. And confirm IPTV App by Alexander + km 4:2:2 - 4:2:0 Feed channels so smooth and perfect for me .
Sorry for my bad English.
;)8)
Dear rmiino,
Do you mean wetek play 2 can play feed that using 4:2:2 codec smoothly?
Thank's and regards
Yes.
oscam-1.20-unstable_svn-11391-emu-android-arm
;););)
Display Morehi,
I have installed oscam like @rmilo wrote (thx very much for guidance)
I have in oscam status connected, not online like in tuner with enigma and no tv channels on wetv.
Do wetv needs special configuration or do You use diffrenet program on wetek play2 to watch tv?
OSCam: 1.20-unstable_svn Build: r11380 Compiler: arm-linux-androideabi-libusb
wetek play2 weos 3.1
Hi.
I have to downgrade to weos 2.0.2. because i try weos3.1 with both wetv and tvheadend server 4.3 + oscam +smpc power vu channels have on sound and Tandberg channels not smooth.
But weos 2.0.2 with Ricardo's tvheadend server 4.3 + spmc , IPTV APP + Mxplayer-bsplayer ,Power vu and Tandberg Channels Work find. And confirm IPTV App by Alexander + km 4:2:2 - 4:2:0 Feed channels so smooth and perfect for me .
Sorry for my bad English.
;)8)
hello , i have installer new android 6.0.1. i am installing oscam but does,nt work, i am conecting to wetek via wincsp or filezila , say the port is not activatec, i nedd to copy oscam to emuladte/0.-......, can you help me¿?
thans
https://linuxsat-support.com/cms/attachment/80067-oscam-zip/
1.extract oscam.zip
2.copy android folder to usbdrive
3.use app es file explorer copy android folder from usbdrive to wp2 sdcard/android
i try using ftp program but i just enter at the path "emulate". Inside "emulate" i can't create path "0" because it's already exist, but i can't see. Probably it's a occult path. I think the new update of wetek play 2 change very optins :(
Okay.
Use WinSCP FTP to wp2
Copy folder name Android inside oscam.zip to wp2 Folder name Android
doesn't exist another oscam manger version like 1.0.4 or something?
Can you telnet or ftp to wp2?
Hello, i have problems on oscam. I installed OSCAM 1.0.3 and work fine, but the locked channels block several times. I try install 1.0.2 version but it's the same problem. Install again 1.0.3 and, in the configuration page, always appears the same version (see the attachment).
Yesterday, i try install OScam Android 4.1 From wetektr.com, but this .apk don't create any path on /sdcard/Android/data, so doesn't work. To resolve, i create the path manually (/sdcard/Android/data/update) and paste the file oscam-EMU-11384.zip to the update path (i renamed the oscam-EMU-11384.zip to arm-oscam.zip). I opened the oscam program and update the file. Last, i configured the reader but any locked channel doesn't work.
Back to OSCAM 1.0.3 and it's work, but with the first problem (block any time).
Try this file
1) Extract zip file oscam.zip
2) Install Install.ipk to wp2
3) Copy oscam-emu-11384.zip to /storage/emulated/0/Android/data/com.android.oscam/installation (If not found folder. Create Folder )
4) Rename oscam-emu-11384.zip to oscam-armeabi-v7a.zip
5) Open oscam app >> setting >> updates(Oscam)
6) Copy Your oscam config to /storage/emulated/0/Android/data/com.android.oscam/conf (If not found folder. Create Folder )
7) Press start oscam.
Oscam-Emu-11384
Display MoreDisplay Moreis there anybody who can compile this with appropiate drivers for wetek play 2?i really want to watch powervu channels on tvheadend.
I built this with the Lbreelec build environment for the Wetek Play 2 (aarch64). But, as I wrote before I have no arm box to test on so no idea if it will work...
I trying to test LibreELEC Krypton/Leia/Agile by Raybuntu and LibreELEC (Krypton) v8.0.1 MR,
Very often buffering on Powervu channels and have no sound at measat 91.5E. Only work fine on tp 4120 V 29720.
Now trying LibreElec Agile by Raybuntu and Patch Tvheadend from https://www.androidfilehost.com/?w=files&flid=48704 .
Have no buffering issues. But only first tiime picture freeze sound work . when stop channels and play again picture work fine have no sound.
Sorry for bad english.what do you mean by patch tvheadend?
1. Download >>>> https://www.androidfilehost.com/?w=files&flid=48704
2. Use 7zip for Extract file.
3. Copy Tvheadend binary file. from >>> tvheadend-test-20160125.tar.gz\test-20160125.tar\shield_root\data\dvb\ to .kodi\addons\service.tvheadend42\bin\
is there anybody who can compile this with appropiate drivers for wetek play 2?i really want to watch powervu channels on tvheadend.
I built this with the Lbreelec build environment for the Wetek Play 2 (aarch64). But, as I wrote before I have no arm box to test on so no idea if it will work...
I trying to test LibreELEC Krypton/Leia/Agile by Raybuntu and LibreELEC (Krypton) v8.0.1 MR,
Very often buffering on Powervu channels and have no sound at measat 91.5E. Only work fine on tp 4120 V 29720.
Now trying LibreElec Agile by Raybuntu and Patch Tvheadend from https://www.androidfilehost.com/?w=files&flid=48704 .
Have no buffering issues. But only first tiime picture freeze sound work . when stop channels and play again picture work fine have no sound.
Sorry for bad english.
Hi.
Not work for me. I'm using Raybuntu LibreELEC Krypton 9.
Tvheadend log.
2017-04-25 15:08:37.861 mpegts: 3760V in 91.5E - tuning on Availink AVL6211+AV2011 DVB-S/S2 #0 : DVB-S #0
2017-04-25 15:08:37.861 linuxdvb: Availink AVL6211+AV2011 DVB-S/S2 #0 : DVB-S #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]
Hi.
All powervu channels. No video, Sound only.
OScam Android 4.1 From wetektr.com
Oscam emu 11359 From sat-support.tv
1. Extract OSCam.wetek2.rar
2. Install OScam Android 4.1
3. Copy oscam-EMU-11359.zip to /sdcard/Android/data/com.android.oscam/update/
4. Rename oscam-EMU-11359.zip to arm-oscam.zip
5. Open oscam app >> setting >> updates(Oscam)
:20_003: