Posts by dpullen87

  • Full Screen PIP/audioPip

    I used to be able to activate PIP on my solo 2 and make the PIP window full screen and receive the audio from the window behind. Good for sport with foreign comms.


    But since upgrading to Solo 4k when in PIP i can't get the PIP window to take over the whole screen, I've tried editing the PiPSetup.py file with MAX_W=MAX_X MAX_H=MAX_Y but it’s still not working.


    I found on here an old plugin called audiopip but as its 6 years old i guess that won’t work either on solo 4k.


    Any suggestions

  • Mgcamd Multiple

    Quote from master G

    The first line/server will be CWS = and the second will be CWS_MULTIPLE =

    So the newcamd.list would be set up as:

    Code
    CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = xxxxx xxxx xxxx xxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_MULTIPLE = xxxxx xxxx xxxx xxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    Thanks Master G :thumbup:


    Will it choose the server issuing the fastest response now or will it not switch until the other is unavailable?

  • Mgcamd Multiple

    Hello,


    I would like to add two lines (CAID 1841) into newcamd.list so that if one fails or is not working great it flicks over to the other.


    Is this possible and if so how?


    Currently have


    CWS_KEEPALIVE = 300

    CWS_INCOMING_PORT = 21000

    CWS = xxxxx xxxx xxxx xxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    CWS = xxxxx xxxx xxxx xxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14

  • ncam without Streamrelay

    I have oscam emu and the channels do work with stream relay, so what is the point of ncam?


    Is there a downloadable converted bouquet with iptv / streaming services. Im using the powervu key updated 0.3, is this the most realible way?


    Cheers,

  • ncam without Streamrelay

    Is ncam supposed to open powervu channels without streamrelay for VU Solo 2, it shows as clearing but I'm getting a black screen.


    If not then what is the difference to oscam other than the name?

  • Little Help Needed Please

    Hello


    I'm seeing the below entries in my logs, can somebody please take the time to explain what they are as they cause a slight freeze.





    Any help would be much appreciated.


    Thanks,

  • Oscam/MGCamd Help

    Tried that and didnt get anywhere, can we presume that my friend is sharing his line :-) and help me sort out my oscam cofig please


    I'm really stuggling here, please help

  • Oscam/MGCamd Help

    Hi All


    I’m tearing my hair out at the moment trying to get things working and I’m need of some help. I have been using a VU+ Solo2 with vix hades running oscam r10808 as my client for weeks with no problems for 28.2.
    Last week I had installed a motorised dish which is all setup and working and naturally I wanted to take full advantage and get a euro sub to open up the channels and that’s when the problems started. I got few tests and added them into oscam and I started getting constant glitching and seeing the below errors in the live log. I deleted my server/conf/user file and started again and worked well last night and then this morning the errors were back.


    2015/06/29 13:12:24 00587FA8 c (ecm) dvbapi (09C4@000000/0259/0081/B3:F3437A96B5F58500148CBB3493D27385): rejected (5 ms) by cesarium3 (F/3/3/3)
    2015/06/29 13:12:24 00587FA8 c (ecm) dvbapi (09C4@000000/0259/0081/B3:F3437A96B5F58500148CBB3493D27385): rejected (3 ms) by cesarium4 (F/3/3/3)
    2015/06/29 13:12:24 00587FA8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1ABA ANY CHID PMTPID 0062 VPID 02FF
    2015/06/29 13:12:24 00587FA8 c (ecm) dvbapi (098C@000000/0259/0081/98:BDE507387390C84D76C432EFD4FA2E44): found (103 ms) by cesarium4 (P/4/4/4)
    2015/06/29 13:12:31 00587FA8 c (ecm) dvbapi (098C@000000/0259/0081/98:D1E801A111CAABAA7FDC6E3A6BBD37F3): not found (321 ms) by cesarium1 (F/4/4/4)
    2015/06/29 13:12:31 00587FA8 c (dvbapi) Demuxer 0 restarting decodingrequests after 14 ms with 2 enabled and 2 disabled ecmpids!
    2015/06/29 13:12:31 00587FA8 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C4 PROVID 000000 ECMPID 1BBA ANY CHID PMTPID 0062 VPID 02FF
    2015/06/29 13:12:32 00587FA8 c (ecm) dvbapi (09C4@000000/0259/0081/B3:3BAFAE5A64FDD3A6903D1FFFB342FC87): rejected (57 ms) by cesarium4 (F/3/3/3)
    2015/06/29 13:12:32 00587FA8 c (ecm) dvbapi (09C4@000000/0259/0081/B3:3BAFAE5A64FDD3A6903D1FFFB342FC87): rejected (3 ms) by cesarium4 (F/3/3/3)
    2015/06/29 13:12:32 00587FA8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1ABA ANY CHID PMTPID 0062 VPID 02FF
    2015/06/29 13:12:32 00587FA8 c (ecm) dvbapi (098C@000000/0259/0081/98:D1E801A111CAABAA7FDC6E3A6BBD37F3): not found (4 ms) by cesarium4 (F/4/4/4)


    So I decided to give mgcamd ago, installed 1.38 from the VIX feeds and downloaded the files from master G’s recent post http://linuxsat-support.com/showthread.php?t=85742 disabled oscam and fired up mgcamd but nothing is clearing.


    Ideally I would like to get oscam up and running as it runs really well for with my UK lines and I hardly see any freezing compared to when I was running cccam.


    Any help would be much appreciated.


    Thanks,


    Dan