Posts by dr key

dr key · Jan 15th 2022

Please link for

FreeServer Enigma2 Plugin by Mino6060 - v_ 7.2.6

dr key · Nov 15th 2011

Quote from Ten Below

I would install webmin, this is an easy way for you to manage your server, choose which logs run at startup & where they log to, even how often they are rotated.

Tutorial - Installing Webmin On Ubuntu Server

Or their is another auto install cccam package where the logs do work after install

Automated Install Script for Ubuntu CCcam Server

Display More

thenk you for help,
i install fresh auto install cccam package from your link, only this auto install script have error in oscam section bicome link for auto install not work,and this cection i install manual.
script for cccamcheck work ok, only i not see logo for update script. and userbeckup script,

thenk you wery mach

dr key · Nov 14th 2011

in the morccamcheck skript
the port 15000 is for :

CHECKNAME="test.txt"
IP="127.0.0.1"
PORT="15000"
for:

WEBINFO LISTEN PORT : ?????
TELNET LISTEN PORT :???????
server port: ???

plase infor me
thenk

dr key · Nov 14th 2011

Quote from Ten Below
Have you enabled debug mode in your cccam.cfg?
Code
DEBUG : yes

SERVER LISTEN PORT :xxxxxxx
ALLOW WEBINFO: yes
ALLOW TELNETINFO:yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO USERNAME :xxxxxxxxx
WEBINFO PASSWORD :xxxxxxxxxxx
WEBINFO LISTEN PORT : 16001
TELNET LISTEN PORT : 16000
SHOW TIMING : yes
DEBUG : yes
DISABLE EMM : yes
EXTRA EMM LEVEL : no
LOG WARNINGS : /tmp/warnings.txt
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
DVB API: -1
MINIMUM DOWNHOPS : 1

dr key · Nov 14th 2011

script and other files

Bin file {cccam and oscam} file in usr/local/bin atribut 755
other oscam files in usr/local/etc atribut 755
script in var/script atribut 755
contrab in etc atribut 755
log file in var/cccamlog atribut 755
2x cccam1.cfg and 2 in var/etc
other foldrrs like :backup,cccamlog,config,keys,script,www,etc in var/

TKS
dr key

dr key · Nov 13th 2011

Asking for help,
I have installed cccam_install_package the Instructions that cam took the forum from youknowhoo and all I consumed 100% by uvom instructions, the problem is that I do not see cccamlog cccam.check, key update, configupdate.log, when you start to say hand on putyy this command / var / script / MoreCCcamCheck.sh then see the log file in var / cccamlog. Many times I start the server is the same problem. I use Ubuntu 8.04

I beseech you look at the scripts, crontab and see if there are any error
---------------------------------------------------------------------------
my contab:
32 * * * * root cd / && run-parts --report /etc/cron.hourly
2 1 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
48 4 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
23 4 12 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
#

54 03 * * * root /var/script/UserBackup.sh
56 03 * * * root /var/script/MoreCCcamstop.sh
57 03 * * * root /var/script/MoreConfigUpdate.sh >> /var/cccamlog/configupdate.log
58 03 * * * root /var/script/keyupdater.sh
59 03 * * * root /var/script/MoreCCcamstart.sh
*/1 * * * * root /var/script/MoreCCcamCheck.sh
*/3 * * * * root /var/script/oscamCheck.sh >>
"03 04 * * 6 root /var/script/LogCleanUp.sh >> /var/cccamlog/CleanUp.log

5,45 * * * * root /var/script/./illegal.sh >> /var/cccamlog/illegal.log 2>&1
02 * * * * root wget -O - http://127.0.0.1/cron_update.php?p=1 >/dev/null 2>&1
30 * * * * root wget -O - http://127.0.0.1/cron_ping.php?p=1 >/dev/null 2>&1

My script:/var/script
-----------------
MoreCCcamCheck.sh
========================
#!/bin/sh
#this script is written By youknowhoo
#i have added a part that checks if CCcam is responding like it should
#that part is written by CC_share.
#this way you can see if it was off(line) or froozen
CHECKNAME="test.txt"
IP="127.0.0.1"
PORT="16001"
OWNER=root
process=`ps auxwww | grep CCcam_1.x86 | grep -v grep | awk '{print $1}'`
if [ -z '$process' ]; then
echo "Couldn't find CCcam_1.x86 running, Restarting CCcam" >> /var/cccamlog/cccam.check
echo && date >>/var/cccamlog/cccam.check
echo "chown owner nodeid"
chown $root /tmp/.CCcam.nodeid
echo "Removing nodeid and starting second CCcam"
rm /tmp/.CCcam.nodeid && /usr/local/bin/CCcam_1.x86 -C /var/etc/CCcam_1.cfg
else echo "CCcam process is present, now checking if CCcam is froozen" >> /var/cccamlog/cccam.check
sleep 6
echo info|nc $IP $PORT >>/tmp/test.txt
set $(ls -s /tmp/test.txt)
if [ '$1' = '0' ];
then
echo "CCcam is froozen, restarting CCcam" >>/var/cccamlog/cccam.check
echo && date >>/var/cccamlog/cccam.check
echo "chown owner nodeid"
chown $OWNER /tmp/.CCcam.nodeid
echo "Removing nodeid and starting second CCcam"
rm /tmp/.CCcam.nodeid && /usr/local/bin/CCcam_1.x86 -C /var/etc/CCcam_1.cfg
else
echo "Cccam is responding like it should" >>/var/cccamlog/cccam.check
fi
rm /tmp/$CHECKNAME
fi
sleep 2
CHECKNAME="test.txt"
IP="127.0.0.1"
PORT="15001"
OWNER=root
process=`ps auxwww | grep CCcam_2.x86 | grep -v grep | awk '{print $1}'`
if [ -z '$process' ]; then
echo "Couldn't find CCcam_2.x86 running, Restarting CCcam" >> /var/cccamlog/cccam.check
echo && date >>/var/cccamlog/cccam.check
echo "chown owner nodeid"
chown $OWNER /tmp/.CCcam.nodeid
echo "Removing nodeid and starting second CCcam"
rm /tmp/.CCcam.nodeid && /usr/local/bin/CCcam_2.x86 -C /var/etc/CCcam_2.cfg
else echo "CCcam process is present, now checking if CCcam is froozen" >> /var/cccamlog/cccam.check
sleep 6
echo info|nc $IP $PORT >>/tmp/test.txt
set $(ls -s /tmp/test.txt)
if [ '$1' = '0' ];
then
echo "CCcam is froozen, restarting CCcam" >>/var/cccamlog/cccam.check
echo && date >>/var/cccamlog/cccam.check
echo "chown owner nodeid"
chown $OWNER /tmp/.CCcam.nodeid
echo "Removing nodeid and starting second CCcam"
rm /tmp/.CCcam.nodeid && /usr/local/bin/CCcam_2.x86 -C /var/etc/CCcam_2.cfg
else
echo "Cccam is responding like it should" >>/var/cccamlog/cccam.check
fi
rm /tmp/$CHECKNAME
fi
========================
MoreConfigUpdate.sh
---------------------------
#!/bin/bash
#Script to process new config and backup old one
#Script designed and written by CC_Share
SOURCE=/var/config
TARGET=/var/etc
FILE=CCcam_1.cfg
BACKUPDIR=/var/backup
CONFIGOLD=CCcam_1.old
if test -f $SOURCE/$FILE ; then
echo "New Config Present"
if test -d $BACKUPDIR ; then
if test -f $BACKUPDIR/$CONFIGOLD ; then
echo "Removing OLD config file from backup directory"
rm $BACKUPDIR/$CONFIGOLD
else
echo "No OLD config to remove."
fi
if test -f $BACKUPDIR/$FILE ; then
echo "Renaming Backup to old config"
cp $BACKUPDIR/$FILE $BACKUPDIR/$CONFIGOLD
rm $BACKUPDIR/$FILE
else
echo "No Backupfile present yet"
fi
if test -f $TARGET/$FILE ; then
echo "Copying Original config to Backup directory"
cp $TARGET/$FILE $BACKUPDIR
rm $TARGET/$FILE
else
echo "No Original Config File Present!?!?"
fi
else
echo "Backup directory does not exist."
echo "making new directory"
mkdir $BACKUPDIR
if test -f $TARGET/$FILE ; then
echo "Copying Original config to Backup directory"
cp $TARGET/$FILE $BACKUPDIR
else
echo "No Original Config File Present!?!?"
fi
fi
echo "Moving New config file to "$TARGET
cp $SOURCE/$FILE $TARGET
rm $SOURCE/$FILE
else
echo "No New Config present, Nothing to process"
fi
SOURCE=/var/config
TARGET=/var/etc
FILE=CCcam_2.cfg
BACKUPDIR=/var/backup
CONFIGOLD=CCcam_2.old
if test -f $SOURCE/$FILE ; then
echo "New Config Present"
if test -d $BACKUPDIR ; then
if test -f $BACKUPDIR/$CONFIGOLD ; then
echo "Removing OLD config file from backup directory"
rm $BACKUPDIR/$CONFIGOLD
else
echo "No OLD config to remove."
fi
if test -f $BACKUPDIR/$FILE ; then
echo "Renaming Backup to old config"
cp $BACKUPDIR/$FILE $BACKUPDIR/$CONFIGOLD
rm $BACKUPDIR/$FILE
else
echo "No Backupfile present yet"
fi
if test -f $TARGET/$FILE ; then
echo "Copying Original config to Backup directory"
cp $TARGET/$FILE $BACKUPDIR
rm $TARGET/$FILE
else
echo "No Original Config File Present!?!?"
fi
else
echo "Backup directory does not exist."
echo "making new directory"
mkdir $BACKUPDIR
if test -f $TARGET/$FILE ; then
echo "Copying Original config to Backup directory"
cp $TARGET/$FILE $BACKUPDIR
else
echo "No Original Config File Present!?!?"
fi
fi
echo "Moving New config file to "$TARGET
cp $SOURCE/$FILE $TARGET
rm $SOURCE/$FILE
else
echo "No New Config present, Nothing to process"
fi
exit
##################
oscam script
--------------
#!/bin/sh

process=`ps auxwww | grep oscam | grep -v grep | awk '{print $1}'`
if [ -z '$process' ]; then
echo "Couldn't find oscam running. Restarting server-binary" >> /var/cccamlog/oscam.check
nohup /usr/local/bin/oscam >> /var/cccamlog/oscam.log &
else
echo "oscam is still OK!" >> /var/cccamlog/oscam.check
fi
===================

UserBackup.sh
===========
#!/bin/sh
#this script is written By youknowhoo
#this script is for monitor the clients/peers/servers
#it makes a print from your server and each CCcam
#it is using telnet so never give telnet a password or username!!
#and never change telnet port!!
IP="127.0.0.1"
PORT="16001"
echo && date >>/var/cccamlog/clients_1.txt
echo info|nc $IP $PORT >>/var/cccamlog/clients_1.txt
echo " "
sleep 3
echo clients|nc $IP $PORT >>/var/cccamlog/clients_1.txt
echo " "
sleep 3
echo servers|nc $IP $PORT >>/var/cccamlog/clients_1.txt
sleep 3
echo "----------------------------------------------"
IP="127.0.0.1"
PORT="15001"
echo && date >> /var/cccamlog/clients_2.txt
echo info|nc $IP $PORT >>/var/cccamlog/clients_2.txt
echo " "
sleep 3
echo clients|nc $IP $PORT >>/var/cccamlog/clients_2.txt
echo " "
sleep 3
echo servers|nc $IP $PORT >>/var/cccamlog/clients_2.txt
====================
kye update script
------------------
wget -qO /var/keys/SoftCam.Key http://www.uydu.ws/deneme6.php?file=SoftCam.Key
wget -qO /var/keys/AutoRoll.Key http://www.softcam.tv/deneme6.php?file=AutoRoll.Key

=====================
klenup script
------------
#!/bin/sh
# Script to cleanup log files
# Script written by Youknowhoo.

OWNER=root
TARGETDIR_1=/tmp
TARGETDIR_2=/var/cccamlog
FILE_1=warning_1.txt
FILE_2=warning_2.txt
FILE_3=warning_3.txt
FILE_4=cccam.check
echo && date

if test -f $TARGETDIR_1/$FILE_1 ; then
echo "warning text 1 present!and removed"
chown $OWNER $TARGETDIR_1/$FILE_1
rm $TARGETDIR_1/$FILE_1
else
echo "No warning text present?!?!Nothing to remove"
fi
if test -f $TARGETDIR_1/$FILE_2 ; then
echo "warning text 2 present!and removed"
chown $OWNER $TARGETDIR_1/$FILE_2
rm $TARGETDIR_1/$FILE_1
else
echo "No warning text 2 present?!?!Nothing to remove"
fi
if test -f $TARGETDIR_1/$FILE_3 ; then
echo "warning text 3 present!and removed"
chown $OWNER $TARGETDIR_1/$FILE_3
rm $TARGETDIR_1/$FILE_1
else
echo "No warning text present?!?!Nothing to remove"
fi
if test -f $TARGETDIR_2/$FILE_4 ; then
echo "Check File present!and removed"
chown $OWNER $TARGETDIR_2/$FILE_4
rm $TARGETDIR_2/$FILE_2
else
echo "No CCcam Check File present?!?! Nothing to remove"
fi
exit

=================
start cccam script
--------------
#!/bin/bash
#Script to start more then one CCcam's with different nodeid
#Script is written by Youknowhoo.
OWNER=root
echo "Starting first CCcam"
/usr/local/bin/CCcam_1.x86 -C /var/etc/CCcam_1.cfg
sleep 3
echo "chown owner nodeid"
chown $root /tmp/.CCcam.nodeid
echo "Removing nodeid and starting second CCcam"
rm /tmp/.CCcam.nodeid && /usr/local/bin/CCcam_2.x86 -C /var/etc/CCcam_2.cfg
fi
===============
stopcccam script
-----------------
#!/bin/bash
#Script to stop all CCcam that are running.
#Script written by Youknowhoo
echo "stop first CCcam server"
killall CCcam_1.x86
echo "stop second CCcam server"
killall CCcam_2.x86
++++++++++++++++++++++

I'll be very happy if someone help me.

Posts by dr key

FreeServer Enigma2 Plugin by Mino60 - v8.3.8 py2 py3

CCcam script Help

CCcam script Help

CCcam script Help

CCcam script Help

CCcam script Help