Καλησπερα μια ερωτηση.δεκτης mio 4k με sdg 8 απο τα προσθετα εχω κατεβασει το kodi 18.6 μπορουμε να περασουμε το τελευταιο 18.9 με καποιο τροπο?
για δοκιμασε ενα online upgrade...?
και πες και εντυπωσεις απο το kodi, γιατι δεν ειναι το δυνατο μας σημειο...
edit: ακυρο... κατι βλεπω δεν πηγε καλα...
στο rc ακριβως πανω απο τον δεικτη εντασης, εχει "ληψη στιγμιοτυπου"
επισης, πατωντας καποιο κουμπι απο το rc της openwebif , εκτελει την εντολη, και στην οθονη φερνει στιγμιοτυπο...
hmmm
and the same message appears in 0.8W
discovery hd czech
disc hd cz/hu
disc hd hungarian
disc hd russian
(the above channels are called disc hd, but shows disc showcase hd programm)
discovery showcase hd europe
as it displays in the up right corner of the channel,
the discovery world channel, will close in 31 december ...
εχει γινει μια εσωτερικη συζητηση, κανουμε καποιες δοκιμες (οι οποιες με την ολη κατασταση... αργουν λιγο παραπανω) και αν ολα πανε καλα, θα ανεβει στο feed και θα ερθει στον δεκτη σε επομενη ενημερωση (και καποια ακομα ,πχ το youtube κλπ...)
those versions are modifies from the first, and i don't know what happens in it...
uninstall this, and try the one here
AddKey aka Biss key Editor Plugin install this plugin, and than just go to the channel, select the plugin and add the key
καλησπερα σας ξερει κανεις αν ηπαρχει ακομη OTT@/NOV@ σε >CS πψαχνο και δεν μπορω να βρω. Ειπαρχει κατι
ειμαι πριβε σερβιτορος απλα αν εχει καπιος να μας βοηθειση λιγο πος και τι πρεπει δοσουμε.
εφχαριστω στον παροχο του Linuxsat
καλοσωρισες κι εσυ...
φιλος, νομιζω οτι σε λαθος μερος ψαχνεις αυτο που ψαχνεις...
??? depending the version of oscam, and if you will create your group and groupkeys, than yes you can have only one key for all group channels...
for example... for 4,8E channels (the one frequency) i have this group for service reference : X:X:X:XXX:X:5E:30B022:0:0:0
;----------------- Group 0x0500 4.8E channels:-----------------
P 0187D4E6 GROUP 0500 ;discovery europe 4.8�E, 12322 V
P 0500FFFF 00 00000000000000 ;ecm key
P 0500FFFF 01 00000000000000 ;ecm key
P 0500 00622EE5 XXXXXXXXXXXXXX ; EMM Key 4.8E, 12322
P 0500 006019B6 XXXXXXXXXXXXXX ; EMM Key 4.8E, 12322
P 0500 0060DA46 XXXXXXXXXXXXXX ; Emm keyand than the au writtes and uses just one key for all those channels
P 0500FFFF 00 XXXXXXXXXXXXXX ; added by Emu Wed Dec 16 22:48:22 2020 UA: 00622EE5
P 0500FFFF 01 XXXXXXXXXXXXXX ; added by Emu Wed Dec 16 22:48:22 2020 UA: 00622EE5* where X the any key that there shoud be...
it isn't an issue... it is an option which looks like an issue in that point, but it could be a "save" in something else...
i can't tell you something about blackhole. maybe it is default this way of scanning, or there is the option and it is pre-selected the "no".
so finally if you do a scan in a way that i am telling above in openatv (and any oe alliance image , and all openpli based images) you have the option to scan
service reference : 1:0:1:514:1:5E:300000:0:0:0 "on" in "ignore dvbs namespace..."
service reference : 1:0:1:514:1:5E:30B022:0:0:0 "off" in "ignore dvbs namespace..."
also, select the "clear before scan" to replace the faulty channel...
yes it looks like "not found"
but why to use a softcam.key from internet?
you may have problem every time that there is any cut or problem in your network, or the files network...
Άρα εννοείς ότι είχε epg αλλά για κάποιο λόγο δεν μου το εμφανιζε george?μου έδειχνε unavailable data κάτι τέτοιο νομίζω ότι έγραφε τώρα με την προσθήκη που έκανα όλα καλα
για το eurosport λες???
υπαρχει στις πηγες του rytec, αλλα παει στο eurosport greek. εσυ πηρες αυτο, και το εκανες αντιγραφη και στο καναλι που ηθελες (και με τον ιδιο τροπο μπορεις να το κανεις και σε αλλα καναλια, αρκει αυτο να ερχεται απο τις πηγες του rytec, η αν βρεις αλλη πηγη).
Display Morejens , looking your groupkey channel hash: 30223BBA, group id: 0000 i think that your service reference is 1:0:1:3E8:1:5E:300000:0:0:0 ?
does not conflict the other frequency each other? 12360 /12322 ???
It is not oscam problem mine Vu+solo2 under ATV 6.4 or Pli 7.2 or 7.3 put every channel from 12360 and 12322 as from 12360 or 12322 depends what frequency was last scanned.
Under BlackHole everything works Ok I will send some examples in next post.
For example we can use Animal Planet Turkey HD (good because only one channel wit this name)
should be Astra 4A 12322.00 V DVB-S2 8PSK 27500 5/6e42a0da22f2b337d1b27bcb.jpg
service reference : 1:0:1:514:1:5E:300000:0:0:0 and from lamedb
--------------------------------------------------------------------
0514:00300000:0001:005e:1:0:0
Animal Planet Turkey HD
p:,c:000514,c:010515,c:030514,c:050001,C:0e00
--------------------------------------------------------------------
next post after rescanning frequency 12322.00
For example we can use Animal Planet Turkey HD (good because only one channel wit this name)
should be Astra 4A 12322.00 V DVB-S2 8PSK 27500 5/6 4,8E
picture shows Animal Planet Turkey HD as on 12360.00 MHz
service reference : 1:0:1:514:1:5E:300000:0:0:0 and from lamedb
--------------------------------------------------------------------
0514:00300000:0001:005e:1:0:0
Animal Planet Turkey HD
p:,c:000514,c:010515,c:030514,c:050001,C:0e00
--------------------------------------------------------------------
next post after rescanning frequency 12322.00
this is a common issue, i don't know why it happens, but a solution is ...
now you are scaning and having service reference : 1:0:1:3E8:1:5E:300000:0:0:0 sr (for disc world as example) .
going to customize menu , and turn off the "ignore dvbs namespace sub network" save, and than scan again both frequencies (selecting clear before scan) all channels will be in their correct frequency and working...
but... than the service reference will turn to : 1:0:1:3E8:1:5E:30B022:0:0:0 and the groupkey will change from
P 30223BBA GROUP 0500 ;
to
P 0187D4E6 GROUP 0500 ;
and P ACE05CA0 GROUP 0800 ;
(because a few of them channels are working, using common keys with 0.8W services...)
lacierva doing the same (ignore namespace... and scan frequency by clean channels first) i think will change and yours service reference...
για το europe οχι, γιατι δεν υπαρχει καποια πηγη που να το φερνει...
για το eurosport υπαρχει η πηγη, απλα εσυ του εδωσες και αλλη κατευθυνση ...
we had the same issue here in 0.8W Ερωτήσεις - Απαντήσεις a few weeks ago, so i believe it is something from channels settings-namespace /groupkey ...
the problem is that in the other case, was simple, ignore namespace from menu settings. in this case, it brings a strange namespace.
epg for those channels is another story...
you have to create your own "extra.sources" and "extra.channels" for epg, but this discuss is for another thread...
jens , looking your groupkey channel hash: 30223BBA, group id: 0000 i think that your service reference is 1:0:1:3E8:1:5E:300000:0:0:0 ?
does not conflict the other frequency each other? 12360 /12322 ???
the files that i gave you, are mine personal and works perfect here (also autoroll).
the only difference between me and you, is the channels service reference...
please check in oscamwebif /files/other files /softcam.key , if the last groupkey is there...
it still looking for the same...
get cw for ecm:2020/12/16 23:53:02 77C3332A c (ecm) 80 30 3D 30 37 20 0E 00 00 00 00 AE A0 00 CC 3D 2020/12/16 23:53:02 77C3332A c (ecm) FB 54 63 10 F7 A5 7F B0 82 8E 62 FF 00 3E 80 00 2020/12/16 23:53:02 77C3332A c (ecm) 00 09 DD 29 0F 4A BE EC 2E EF 3F A9 C7 1D 55 EC 2020/12/16 23:53:02 77C3332A c (ecm) C5 06 7E 03 59 C8 B8 FA 9E 6C 80 08 E9 27 25 92 2020/12/16 23:53:02 378166EF r (emu) csaUsed: 0, xorMode: 0, ecmSrvid: 03E8, hashModeCw: 0, modeCW: 02020/12/16 23:53:02 378166EF r (emu) channel hash: 988E855C, group id: 00002020/12/16 23:53:02 378166EF r (emu) Key not found or invalid: P ****03E8 00
like it is not reading it from the softcam.key file???
yes it is, but i asked for a log in debug level 2 to see again the groupkey that asking for...
a log in debug2 ?
