Posts by georgeflu

ο δεκτης ειναι ο 800se που λεει στο crashlog?

εχεις κανει κατι, πχ ενα στικακι και να μεταφερεις εκει καποιους φακελους, ωστε να δημιουργησεις χωρο?

menu/setup/system/expert settings /hotkey

hotkey?

πληρης ενημερωση, γινεται στα αρχεια που πρεπει να γινει...(στα βασικα ας πουμε)

καποιες φορες (οχι πολυ συχνα) χρειαζεται να γινουν αλλαγες και σε πιο σημαντικα αρχεια. το base-files ειναι στα σημαντικα και δεν περιλαμβανεται στο πιο πανω (αλλα δεν χρειαζεται συνεχεια ενημερωση). επισης δεν χρειαζεται ενημερωση, εαν εχετε φλασαρει τον δεκτη σας λογισμικο (αν δεν κανω λαθος ) με ημερομηνια 30/3/2020 και μετα, δεν χρειαζεται να το κανετε ενημερωση.

ειται απο τον software manager του image, ειται απο telnet ειναι το ιδιο πραγμα...

ομως

1) υπαρχουν καποιες περιπτωσεις που χρειαζεται καποια συγκεκριμενη εντολη (οπως η πιο πανω ) που περιεχει κατι πολυ συγκεκριμενο ( το "force-reinstall " ) που κανει ας πουμε "με το ζορι" επανεγκατασταση το πακετο που θα δωσουμε...

2) η πιο πανω εντολη, ειναι μονο για το πακετο "base-files" .

εαν θελεις πληρη ενημερωση

opkg update

opkg upgrade

reboot

Quote from blutime

I downloaded this version Satdreamgr-6-sf8008-20200405, I can install it in multibootis version Satdreamgr-6-sf8008-20200405, I can install it in multiboot,

It only has the Octagon folder and usb_update.bin

which way are you trying to install it?

which image are you using in the flash?

and it is known , that even if it says "multiboot" version, it is equal to the old system, and not common finaly to other base images...

by the other side... you can use the above refered SDG8 "20200408 or later" , which uses the new (for sf8008) multiboot. but even for that,for the moment, you can use only this image ( in 4 different partitions). soon all the other teams will upgrade to this multiboot, and will be compatibility between all ...

Quote from s.savas

Quote from hecha71

SatDreamGr 8 image for octagon sf8008 with multiboot support

Use an image with the date 20200408 or later. A new core and drivers have been added to the software, where receivers flash. divided into 4 sections, so you don't need an SD card to use multi-loading.

Display Spoiler

Due to changes that exist but will also be made to your device, you need to install the software from scratch using a USB flash drive (not via an internal installer).

For those who don't remember, download the software (full version, not multi-download), unpack it, and transfer the contents to a fat32-formatted USB memory card. (you should have 4 .bin files inside).

Turn off the power to the receiver and plug the USB flash drive into the USB 3.0 port, press the standby button on the receiver and turn on the power switch (hold until "update"appears).

On the display that appears, select "flash Programming", once the process is complete, you can restore the channel settings, re-add extensions, and so on.

Now you have 3 more slots to install the image of your choice ...

The multi-loading mode is the same for most receivers on the market (for example, edision, zgemma, etc.) But it is new / changed for the sf8008. In practice, this means that the software of other teams is not currently compatible, but this will happen soon when other teams update to a new type of multiload.

http://sgcpm.com/satdreamgr-images-8/octagon/sf8008/

Display More

Hello. I installed the new image on multiboot from scratch. By doing a green button with the remote, we delete the plugins that are installed by pressing the Red button. However, here we see that more installed plugins are not among the installed plugins. How can I activate these plugins.

Display More

looks that you restored settings (and maybe from another image?) , and it tried to download more plugins?

because in your screens, i can see plugins that they are not installed from default (cutlist editor 6.4 , dvd player, dreamexplorer etc...)

also,there are a few other of them, which they are installed , but it does not shows them in "plugins" (green button) ,as "autobackup" , which you can find in menu/setup...

try once to do a total clear installation, and you will see that the most of them will not appear by default (you can download manual most of them if you need them).

how are you flashing your receiver? try the same way

also, when you are flashing an image, are those the folders that creating in unpack the zip/image?

Quote

- copy the file to an empty USB stick FAT32 formatted in the following folder, depending on the box:

/vuplus/your box/

(example: /vuplus/solose/splash_cfe_auto.bin)

- now you can flash it on your box - the same way, like you are flashing images

now you have to place it in a fat32 formated usb stick.

the folders there, should be as the folders when you are flashing image (above is an example for vu+ solose, you have to create the folders for your model).

than you are doing the same, when you are flashing image (i do not know the way for zgemma)

???

and i answer myself, no you didn't read it...(and you still don't)

Quote

first you need a picture in .bmp format (picture.bmp).

- it has to be im format 720x576 und 24 bit.

- if we have it, it's need to be renamed in splash_cfe_auto.bin

(just rename* the picture.bmp in to splash_cfe_auto.bin) (like this is wrong: splash_cfe_auto.bin.bmp)

- copy the file to an empty USB stick FAT32 formatted in the following folder, depending on the box:

/vuplus/your box/

(example: /vuplus/solose/splash_cfe_auto.bin)

- now you can flash it on your box - the same way, like you are flashing images

Display More

in my above post, there is a link, which explains how to create and change splash... have you read it?

if you changed image and it still shows the atv, you need "spalsh" .as i remember, it isn't in directory, but in boot manager...

you need to follow this How to make and change an Enigma2 splash screen!

if you are still using atv and you just need to replace the existing one, than in usr/share is the "bootlogo file"

δυστυχως δεν υπαρχει κανενα εναλλακτικο λογισμικο γι αυτον (και τον 831) τον δεκτη...

σαν fta μπορει να δουλεψει, μονο στον hotbird και μονο με την προφορτωμενη λιστα που υπαρχει στο μπουκετο "public" ...

you can find in our repository our new version SDG8 for octagon sf8008 , including multiboot support

Use the image with the date 20200408 and latest

New kernel and drivers have been added into the software, where the receivers flash is splitted into 4 partitions, so you don't need an sd card to use multiboot.

* important clarifications

important 1

due to the changes that exist, but will also be made on your device, it is necessary to install the software on scratch, using a usb stick (and not through the internal installer).

for those who don't remember,

. download the software (the full version and not the multiboot), decompress it and transfer the content to a usb stick formatted in fat32. (inside you must have 4 .bin files)

.power off the receiver from the power switch and plug the stick on usb 3.0 port

. press the standby button on the receiver and turn on the power switch (hold down until the "updt" appears)

.in the display that appears, select "Flash Programming"

once the process is complete, you can restore settings channels, re-add add-ons etc ...

.now you also have 3 more slot, to install the image of your choice ...

important 2

The mode of operation of multiboot is the same for most receivers on the market (eg edision, zgemma, etc.), but it is new / modified for sf8008. In practice, this means that at present the software of the other teams is not yet compatible, but it will be soon, when the other teams upgrade to the new type of multiboot.

try

root/root

or root / and empty password... (except if you are using dcc, which does not accept empty)

ναι...

το λεει ξεκαθαρα το δευτερο συνθετικο της λεξης, ολο το υπολοιπο εχει την ιδια βαση...

if your psu has problem, than just replacing that, everything should be as it was a few days ago... (you do not have to install image , plugins, etc...)

αν εχουν "φουσκωσει" ... εχουν "ομολογησει" .

αν δεν εχουν φουσκωσει, οι πρωτοι επικινδυνοι ειναι οι (θεωρητικα) μεγαλοι . καποιος 1000μF /10 η 16v και καποιοι 470μF/25 η 35v (η και ολοι τους)

oscam? η oscam-emu ?

το feed του image δεν λειτουργει???

αυτη ειναι και η συνηθισμενη συμπεριφορα προβληματικου τροφοδοτικου. αν οι πυκνωτες χασουν χωρητικοτητα, τοτε δεν επαρκει το ρευμα για σταθερη εκκινηση. αν παρει, τοτε δουλευει κανονικα. βεβαια το επομενο σταδιο, ειναι να "νεκρωσουν" τελειως, οποτε δε θα αναψει ποτε...

το κακο ειναι οτι πολλες φορες, ενω υπαρχουν προβληματικοι πυκνωτες, δε μας το δειχνουν...

και επισης, προσωπικη εκτιμηση ειναι οτι ισως να συμβαινει το πιο πανω, με βαση τα συμπτωματα που αναφερεις (θα μπορουσε να ειναι οτιδηποτε αλλο)