Changeset 11575
Message:
cak7 - fix caid 0000 and all other known issues
no config change required
patch provided by @pehedima
Changeset 11576
Message:
[gbx] - more generalized routing info in cw msg
fix minor bugs
thanks @chimpie23 Author: felixka
Message:
[gbx] - fix ccc->gbox reshare [gbx] - add caidtab as reshare settingAuthor: felixka
Message:
[gbx] - fix ccc->gbox reshare
[gbx] - add caidtab as reshare settingAuthor: felixka
Message:
[gbx] - try fix ecm and cw messages
fix ecmfmt g,j parameters [dvbapi] - add ecm.info gbox style Author: felixka
Message:
[gbx] - try fix ecm and cw messages
fix ecmfmt g,j parameters
[dvbapi] - add ecm.info gbox style Author: felixka
an oscam for mio 4K edision without emu you can have are only with emu thanks friends
Please can anyone tell me which is the correct .ipk or indeed binary for latest oscam-emu to run on vu ultimo and openpli 7.2. Thanks
@titau_246 i have tried more than 15/20 different server, and always the same channels freeze: W9/RMC/6ter......
@MOHAMED_OS Ok i'll try.
i Have this one installed:
enigma2-softcams-oscam-all-images_11.572-emu-r798-arm+mips_all.ipk
cccam for test
XXXXXXXXXXXXXXXXXXX
use this config
#### "*******************************************"
#### "* ..:: A U T H O R ::.. *"
#### "* << MOHAMED_OS >> *"
#### "* ..:: E l E u L m A ::.. *"
#### "*******************************************"
[global]
logfile = /tmp/oscam.log
nice = -2
waitforcards = 0
preferlocalcards = 1
dropdups = 1
lb_mode = 3
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 10
lb_reopen_percent = 11
lb_reopen_seconds = 300
lb_reopen_invalid = 0
lb_retrylimit = 500
lb_stat_cleanup = 168
resolvegethostbyname = 1
disablecrccws_only_for = 09C4:000000;098C:000000;098D:000000;0500:032830,030B00,042820,042800,043800,041950;0500:050F00;0E00:000000
Skip CWs checksum test = OK
Skip CWs checksum test only for = 09C4:000000;098C:000000;098D:000000;0500:032830,030B00,042820,042800,043800,041950;0500:050F00;0E00:000000
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /tmp/aclog.log
denysamples = 4
[cache]
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox
[webif]
httpport = 8888
httprefresh = 5
httpshowpicons = 1
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1#### "*******************************************"
#### "* ..:: A U T H O R ::.. *"
#### "* << MOHAMED_OS >> *"
#### "* ..:: E l E u L m A ::.. *"
#### "*******************************************"
###Priority#####
P: 0100:000068 ;Polsat
P: 0500:041950 ;FRANSAT
P: 0500:000000 ;TNTSAT,SRG SSR
P: 0100:00006D ;TeleSat
P: 1810:000000 ;Canal+ esp
P: 098C:000000 ;SKY_DE
P: 09C4:000000 ;SKY_DE
P: 1802:000000 ;Nos,DIGI TV
P: 0D95:000000 ;ORF Digital
P: 0609:000000 ;Orange Sk
P: 1815:000000 ;UPC Direct Hungary
P: 0D95:000010 ;ORF Digital
P: 0100:00006A ;Canal Digitaal NL
P: 1803:000000 ;Polsat
P: 0100:000000 ;NC+ (Seca)
P: 0D96:000004 ;M7 Group
P: 0100:00006C ;TV Vlaanderen
P: 4AEE:000000 ;Bulsatcom
P: 1830:000000 ;Max TV,HD+
P: 183D:000000 ;Tivusat
P: 0604:000000 ;Nova Greece
P: 0B00:000000 ;Canal Digital Nordic,DigitalALB,Antiksat,Kabelkiosk
P: 0963:000000 ;Sky Digital
P: 0D96:000000 ;SKY LINK
P: 0D97:000000 ;UPC Direct Hungary
P: 1843:000000 ;HDPlus
P: 0B02:000000 ;Focus Sat Moldova 0.8w
P: 0604:000000:02BF:0130:0020 ;ART HekayAt
P: 0604:000000:02C1:0134:0020 ;ART HekayAt2
P: 0604:000000:02C2:0136:00CC ;ART Aflam
P: 0604:000000:02C4:0138:00CD ;ART Aflam2
P: 0604:000000:02C5:013A:009C ;ART Cinema
P: 0629
P: 1818:000000
P: 1882:000000
P: 1819:000000
P: 0B1C:000000
P: 1800:000000
###Emu_key###
P: 2600:000000 ;BISS
P: 0E00:000000 ;PowerVu
P: 1010:000000 ;TANDBERG
###ADD###
A: ::000A:0104 2600:000000:1FFF ; ERT 1
A: ::0014:0100 2600:000000:1FFF ; ERT 2
A: ::0028:0102 2600:000000:1FFF ; ERT SPORTS HD
###Ignore###
I: 0
I: 5604:000000:0066 ;AFN|prime Atlantic
I: 5604:000000:0067 ;AFN|news
I: 5604:000000:0068 ;AFN|sports
I: 5604:000000:0069 ;AFN|prime Pacific
I: 5604:000000:006A ;AFN|spectrum
I: 5604:000000:006B ;AFN|sports 2
I: 5604:000000:006C ;AFN|family
I: 5604:000000:006D ;AFN|movie
I: 5604:000000:0192 ;AFN|Bars;Tone
I: 5604:000000:0191 ;AFN|Reaper (EPG Video)#### "*******************************************"
#### "* ..:: A U T H O R ::.. *"
#### "* << MOHAMED_OS >> *"
#### "* ..:: E l E u L m A ::.. *"
#### "*******************************************"
[reader]
label = MyCcCam
enable = 1
protocol = cccam_mcs
device = Host,Port
user = User
password = Passwd
inactivitytimeout = -1
reconnecttimeout = 12
cacheex_block_fakecws = 1
group = 1
cccversion = 2.1.3
dropbadcws = 1
cccmaxhops = 2 # dont use higher than 3 !!!
ccckeepalive = 1
cccwantemu = 1
[reader]
label = MymGcAmD
enable = 0
protocol = newcamd
device = Host,port
key = 0102030405060708091011121314
user = User
password = Passwd
inactivitytimeout = -1
disableserverfilter = 1
connectoninit = 1
group = 2
audisabled = 1
[reader]
label = MyCcCam_2
enable = 0
protocol = cccam_mcs
device = Host,Port
user = User
password = passwd
inactivitytimeout = -1
reconnecttimeout = 12
cacheex_block_fakecws = 1
group = 1
cccversion = 2.1.1
dropbadcws = 1
cccmaxhops = 2 # dont use higher than 3 !!!
ccckeepalive = 1
cccwantemu = 1
[reader]
label = Card_Blanca
enable = 0
protocol = internal
device = /dev/sci0
services = canal+ esp
caid = 1810
ecmwhitelist = 1810@1F1F1F:89
detect = cd
nagra_read = 2
mhz = 500
cardmhz = 368
ident = 1810:000000,004001,004101
group = 4
emmcache = 1,3,2,0
[reader]
label = emulator
enable = 1
protocol = emu
device = emulator
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 3
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE#### "*******************************************"
#### "* ..:: A U T H O R ::.. *"
#### "* << MOHAMED_OS >> *"
#### "* ..:: E l E u L m A ::.. *"
#### "*******************************************"
[account]
user = dvbapiau
pwd = dvbapiau
keepalive = 1
au = 1
group = 1,2,3,4,5,6,7use this oscam version
| Settings:
| CONF_DIR = /var/tuxbox/config
| CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lm -lpthread -ldl
| UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO STINGER SMART
| Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.24.0.37-3f461da) 9.2.0
| Config : build/mipsel-unknown-linux-gnu-ssl-libusb/config.mak
| Binary : Distribution/oscam-1.20_svn11572-798-mipsel-unknown-linux-gnu-ssl-libusb
+-------------------------------------------------------------------------------Hello everybody.From few weeks ago,i tried to install wicardd on my dm920 with dreamelite 6.0 ,demanager,but without succsess.Oscam and cccam is appearing on demanager panel and working ,but i want to use widardd too.How can i do to put wicardd to work?Just have to use deb file on #87 post,or something another.
Thanks in advance :)
use this oscam
config dir : /etc/tuxbox/config
Display More#
Hi s3n0.
Already managed to solve.
I found OSCam Merlin 11572 in another forum, installed it and it is working fine.
Thanks.
#
Anybody could advise on where to get the wicardd for aarch64 or at least the wicardd developer website/repo so that I could recompile myself?
use oscam
[streamserver] Synced descriptor parsing code with the dvbapi
This should fix no AC-3 audio on some PowerVu channels.[streamserver] Synced descriptor parsing code with the dvbapi
This should fix no AC-3 audio on some PowerVu channels.[streamserver] Synced descriptor parsing code with the dvbapi
This should fix no AC-3 audio on some PowerVu channels.[streamserver] Synced descriptor parsing code with the dvbapi
This should fix no AC-3 audio on some PowerVu channels.perfect oscam (patch)
New patch (for 11572
- fix hidecards (this now realy hide cards for client -> remove all cards on client server so client see null cards until acocs exprire and restore cards to client. Previous patch does nothing. With this patch all is ok, no client crash or reconnects)
- readers ip on readers tab
- user force reopen
- mpcs hellboy detection
perfect oscam (patch)
New patch (for 11572
- fix hidecards (this now realy hide cards for client -> remove all cards on client server so client see null cards until acocs exprire and restore cards to client. Previous patch does nothing. With this patch all is ok, no client crash or reconnects)
- readers ip on readers tab
- user force reopen
- mpcs hellboy detection
perfect oscam (patch)
New patch (for 11572
- fix hidecards (this now realy hide cards for client -> remove all cards on client server so client see null cards until acocs exprire and restore cards to client. Previous patch does nothing. With this patch all is ok, no client crash or reconnects)
- readers ip on readers tab
- user force reopen
- mpcs hellboy detection
