Posts by johngav
-
-
This is the help I received off Master G when I had problem flashing.
Copy and paste each line into telnet / putty, pressing enter button after each.
This will put the receiver into flash / recovery mode.
Now go to a browser and enter the ip address of the receiver (this will be shown on the tv screen).
Flash the new image of choice from the web-interface.
-
How do I enter the following in telnet using DCC ?
echo "rescue" >> /proc/stb/fp/boot_mode
rebootIs It as below?
rescue (enter)
proc (enter)
stb (enter)
fp (enter)
boot_mode (enter)
reboot (enter)Hopefully this will put my receiver into flash / recovery mode.
Thanks -
[ FOR SD VIEWING BELOW ]
SKY SPORTS BOXOFFICE
FREQUENCY = 12266
SYMBOL RATE= 27500
POLARIZATION = Horizontal
FEC 5/6
***********************
[ FOR HD VIEWING BELOW ]
SKY SPORTS BOXOFFICE
FREQUENCY = 10862
SYMBOL RATE = 23000
POLARIZATION = Horizontal
FEC 2/3 -
I've just set up a new vu+duo and whilst I was in cool tv guide I pressed the play button on the remote.
It then gave me a list of my other bouquets, of which I can now select without coming out of the cool tv guide and back to favorites as I've always done before, hope this is useful if you didn't already know.