Oscam Emu 11451 VU + SOLO4K
Posts by GONZALES
-
-
vu + ultimo 4k oscam-emu 11442 binarka
-
serwer oscam
####################### CCcam ########################## ##
[czytelnik]
label = server1
enable = 1
protocol = cccam
device = host, port
użytkownik = użytkownik
password = pass
bezczynnośćczas = -1
disablecrccws_only_for = 1811: 003311; 0500: 032830; 0100: 003311; 0500: 030B00
grupa = 1
disablecrccws = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
####################### Ncamed ########################## ##
[czytelnik]
label = server2
enable = 0
protocol = newcamd
device = host, port
klucz = 0102030405060708091011121314
użytkownik = użytkownik
password = pass
fallback = 1
grupa = 2
####################### Gbox ########################## ##
[czytelnik]
label = server4
enable = 0
protocol = gbox
mg-encrypted = D: {192.168.0.4 {12345 34567 {ABCD1234 {9 9}}}}
grupa = 3
caid = 0300
####################### Emulator ########################## ##
[czytelnik]
label = constant.cw
enable = 0
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD, 0940
grupa = 1
[czytelnik]
label = emulator
protocol = emu
device = emulator
caid = 090F, 0500,1801,0604,2600, FFFF, 0E00,4AE1,1010
detect = cd
ident = 090F: 000000; 0500: 000000,023800,021110,007400,007800; 1801: 000000,007301,001101,0011111; 0604: 000000; 2600: 000000; FFFF: 000000; 0E00: 000000; 4AE1: 000011,000014, 0000FE; 1010: 000000
grupa = 1
emmcache = 1, 5, 11,1
emu_auproviders = 0604: 010200; 0E00: 000000; 4AE1: 000011,000014,0000FE; 1010: 000000
emu_datecodedenabled = 1
[czytelnik]
label = AFN
enable = 0
opis = AFN-EMU
protocol = emu
device = Emulator
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
ecmwhitelist = 0E00: 91
detect = cd
grupa = 1
emmcache = 1, 5, 11,1
emu_auproviders = 0E00: 000000
auprovid = 000E00
[czytelnik]
label = AFN
opis = AFN-EMU
protocol = emu
device = Emulator
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
ecmwhitelist = 0E00: 99
detect = cd
grupa = 8
emmcache = 1, 5, 11,1
emu_auproviders = 0E00: 000000
auprovid = 000E00
================================================
oscam conf
[światowy]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
[Pamięć podręczna]
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
Wspól = 1
au = 1
pmt_mode = 0
opóźnienie = 60
ecminfo_type = 1
użytkownik = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
[webif]
httpport = 8888
httpallowed = 127.0.0.1, 192.168.0.0-192.168.255.255
================================================== =
Wszesze
Wszeszeczszechsze
-
-
pleas Oscam-Emu OpenEsi 5.5
ok oscam-emu Open Atv
-
root@vusolo4k:~# install -force-overwrite /tmp/enigma.ipk
-sh: install: command not found
root @ vusolo4k: ~ #
root @ vusolo4k: ~ #
root@vusolo4k:~# opkg install -force-overwrite /tmp/enigma.ipk
Collected errors:
* opkg_prepare_url_for_install: Couldn't find anything to satisfy '/tmp/enigma
ipk'.
root@vusolo4k:~#
root@vusolo4k:~#
-
telnet opkg install --force-overwrite /tmp/*.ipk no instal oscam emu 11392 openpli 6.0cr
root@vusolo4k:~# opkg install --force-overwrite /tmp/*.ipk
Not selecting enigma2-plugin-softcams-oscam.emu-11392 openpli due to incompatib
e architecture.
Unknown package 'enigma2-plugin-softcams-oscam.emu-11392'.
Collected errors:
* opkg_solver_install: Cannot install package enigma2-plugin-softcams-oscam.em
-11392.
root@vusolo4k:~#
-
openpli 6.0cr nie instal telnet
root @ vusolo4k: ~ # dpkg install --force-overwrite /tmp/*.ipk
-sh: dpkg: polecenie nie znaleziono
root @ vusolo4k: ~ #
-
vu+solo4K OpenPli 6.0cr
enigma2-plugin-softcams-oscam.emu-11392_openpli_armv7ahf-vfp-neon.ipk
telnet
root@vusolo4k:~# opkg install --force-overwrite /tmp/*.ipk
Not selecting enigma2-plugin-softcams-oscam.emu-11392 openpli due to incompatib
e architecture.
Unknown package 'enigma2-plugin-softcams-oscam.emu-11392'.
Collected errors:
* opkg_solver_install: Cannot install package enigma2-plugin-softcams-oscam.em
-11392.
root@vusolo4k:~# -
unable to connect with DCC
user: root
password: linuxsat
do not workTelnet Connected
FTP Connected
Telnet Disconnected
Telnet login incorrect!how to do ?
spróbuj tym
-
these are repacked to work with solo4k we will have to wait for next MP update to see if they do
thanks to nunigaiaMediaPortal update failed! Check log carefully!
python-cfscrape_1.6.6-r0_all.ipk error
-
-
ive just installed bh image on my 4k and im finding it difficult to install oscam softcam file i installed the wrong soft cam file and now i cant delete it to install correct one .i manually installed 3 oscam ipk files but i can ony find one .i also manually installed linuxsat plugin but i cant find that either after rebothing ive done it easy with other images but finding bh difficult
lLnuxatPanel 1.3 solo4k
TeamViewer 11 podaj login i hasło
-
I can not install it
and once I install the DCC does not work TNK
-
-
-
bulsat na cccam OFF mgcamd 1.38 ON
-
-
plugin TSpanel
Addons/TunisiaSat Vuplus Addons/BlackHole-Cams
-