Posts by mr_no

  • Streaming to a PC using Webif or Kodi (VU+ Solo 2) not working

    Hi


    I have a Vu+ Solo 2, with Blackhole 2.1.5 installed.


    Tuner A is configured like this:
    Configuration Mode: Simple
    Mode: DiSQqC A/B/C/D


    Port A : 28.8 E
    Port B: 13.3 E
    Port C: 4.8 E
    Port D: 0.8 W


    Tuner B is configured like this:
    Configuration Mode: Equal to
    Tuner A:



    I tired using the Webif, but want to watch a different channel as on TV. If I just click on the stream, nothing happen. If I click on the channel first, the channel on TV changes as well. Is there a way to watch a different channel on the stream then on TV?


    I have tried to use Kodi as well, and installed the Vu+ plugin, it gets all the channels from the VU+, but when I click on one of the channel, nothing happens. If I configure the plugin with ZAP first, then it works from Kodi, but the channel changes on TV as well.


    Is there anyway to configure this?

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)


    Thanks a lot!!! This worked!! Finally!!

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

    Quote from darius

    no canal digital is not paired ,but viasat is. you can use it on any box. I´m using it on VU+Solo and no problem.


    Ive tried with all kind of different settings, but still no luck, how have you configured it? it works fine as soon as i put it in my orginal CD tuner, but when in VU+ it doesnt work.


    Ive tried using both CCCAM and OSCAM, but dont get any pictures. Maybe you can share you config with me?

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

    the boxid key isnt correct, i edited it before posting it here :)


    I will try to put it without spaces when i get home


    - - - Updated - - -


    still no luck :( I tried to add the box id without spaces.


    I even tried OSCAM with OpenPli also using the settings that where uploaded here, but still not working

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

    I now installed OpenPli, added the config files you sent, downloaded OSCAM via OpenPli Plugins, this is the log I get, and its still not working



    - - - Updated - - -


    Also tried CCCAM, added these lines to the CCCam.cfg


    SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
    BOXKEY : /dev/sci0 xx xx xx xx


    also tried with a different frequency
    SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000
    BOXKEY : /dev/sci0 xx xx xx xx


    but no luck...

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

    2015/03/11 22:00:33 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10611 (mipsel-unknown-linux-gnu)
    2015/03/11 22:00:33 0 s (main) System name = Linux
    2015/03/11 22:00:33 0 s (main) Host name = vusolo2
    2015/03/11 22:00:33 0 s (main) Release = 3.13.5
    2015/03/11 22:00:33 0 s (main) Version = #1 SMP Mon Feb 23 16:09:03 CET 2015
    2015/03/11 22:00:33 0 s (main) Machine = mips
    2015/03/11 22:00:33 0 s (main) Stb model = dm8000
    2015/03/11 22:00:33 0 s (main) Stb vumodel = vusolo2
    2015/03/11 22:00:33 0 s (main) Stb boxtype = vusolo2
    2015/03/11 22:00:33 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5114
    2015/03/11 22:00:33 0 s [Emu] oscam-emu version 713
    2015/03/11 22:00:33 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2015/03/11 22:00:33 0 s (main) signal handling initialized
    2015/03/11 22:00:33 0 s (net) newcamd: initialized (fd=7, port=10001)
    2015/03/11 22:00:33 0 s (net) -> CAID: 0B00 PROVID: 000000
    2015/03/11 22:00:33 0 s (net) cccam: initialized (fd=8, port=12000)
    2015/03/11 22:00:33 0 s (reader) CANAALDIGITAAL [internal] creating thread for device /dev/sci0
    2015/03/11 22:00:33 0 s (reader) emulator [emu] creating thread for device emulator
    2015/03/11 22:00:33 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
    2015/03/11 22:00:33 0 s (main) waiting for local card init
    2015/03/11 22:00:33 55BA20 r (reader) CANAALDIGITAAL [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
    2015/03/11 22:00:33 55BA20 r (reader) CANAALDIGITAAL [internal] Reader sci internal, detected box type: vusolo2
    2015/03/11 22:00:33 55BFF0 r key file not found in: /etc/tuxbox/config
    2015/03/11 22:00:33 55BFF0 r key file not found in: /var/keys
    2015/03/11 22:00:33 55BFF0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
    2015/03/11 22:00:33 55CAA0 h (webif) webif: decompressed 106983 bytes back into 276140 bytes
    2015/03/11 22:00:33 55CAA0 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
    2015/03/11 22:00:34 55BFF0 r (reader) emulator [emu] card detected
    2015/03/11 22:00:35 55BFF0 r (reader) emulator [emu] found card system emu
    2015/03/11 22:00:35 55BFF0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2015/03/11 22:00:35 55BFF0 r key file not found in: /etc/tuxbox/config
    2015/03/11 22:00:35 55BFF0 r key file not found in: /var/keys
    2015/03/11 22:00:36 0 s (main) init for all local cards done
    2015/03/11 22:00:36 0 s (anticasc) anti cascading disabled
    2015/03/11 22:00:36 5612B0 c (client) plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))
    2015/03/11 22:00:36 5612B0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
    2015/03/11 22:00:36 5612B0 c (dvbapi) ERROR: Your vusolo2 box contains a serious dvb driverbug for pid handling, please ask the manufacturer to fix it!
    2015/03/11 22:00:38 5612B0 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0B00 ECM_PID: 0064 PROVID: 000000
    2015/03/11 22:00:38 5612B0 c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
    2015/03/11 22:00:38 5612B0 c (dvbapi) Demuxer 0 receiver wants to demux srvid 05DD on adapter 0000 camask 0001 index 0000 pmtpid 0100
    2015/03/11 22:00:38 5612B0 c (dvbapi) Demuxer 0 new program number: 05DD (0B00:05DD unknown) [pmt_list_management 3]
    2015/03/11 22:00:38 5612B0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    2015/03/11 22:00:41 5612B0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
    2015/03/11 22:01:49 5612B0 c (-) -- Skipped 22 duplicated log lines --


    this is the log now...


    Sorry about earlier, I have now installed a fresh copy of the image.. and installed your config files.

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

    what user and password do I use?


    I found it :)


    - - - Updated - - -



    - - - Updated - - -


    this keep repeting it self.

  • Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

    Hi


    I just bought a VU+ Solo 2, and I have a brand new Canal Digital Card that I want to use on the VU+ box, the card was earlier today activated using a Canal Digital Sat reciver, so the card works fine there. Is it possible to use cccam as a softcam on the VU+? I tried it, but it would work. Is there any config I have to do to make it work?


    I really hope someone here can help me, or guide me in the right direction, on what cam to use, and how to configure it.


    - - - Updated - - -


    I have tried using both blackhole lastest img, and openpli. I have done nothing with the cccam config files...only installed the cccam.