Posts by Gillies

got it guys, after all the messing around with ports it was the dns entry! when i added my dns domain to the router i wrote the ip instead of the hostname, changed to hostname and now up and running :) thanks guys for all your help

Done both, still no luck :(

Alright guys, I've just recently set up my own PC Linux Ubunto server. Got CCcam + Oscam all up and running like a treat on my own home network however, when I go to my friend's to add him to the server it just keeps saying offline.

I've tried opening a few different ports on the router and none have work so far. I've read online aswell that a few people have had issues opening ports on the BTHomeHub3 aswell.

Has anyone managed to get a port opened successfully on this?

Any help is appreciated.

got the server all up and running on my dm800 on my own network everythin is fine, went to add cline to friends box and says server offline :(

opened port 12000 on my router and command SERVER LISTEN PORT: 12000 in cccam.cfg, still no luck

one thing after another!

no no , just a few family members

Sorted!!! you are a genious mate!!! thank you very very much, all up and running now. i owe u a free line ;)

took box id out, still connecting to card with cccam but now getting these messages:

2012/10/14 21:03:13 9C925A8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0
2012/10/14 21:03:18 9C925A8 c cccam (0963&000000/0000/0FA3/6A:34E9): timeout (5000 ms)
2012/10/14 21:03:18 9C955D8 c client connected to 10000 port
2012/10/14 21:03:18 9C955D8 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
2012/10/14 21:03:18 9C955D8 c user cccam authenticated successfully (CCcam)
2012/10/14 21:03:18 9C955D8 c AU disabled for user cccam
2012/10/14 21:03:23 9C955D8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0
2012/10/14 21:03:28 9C955D8 c cccam (0963&000000/0000/0FA3/6A:A361): timeout (5001 ms)
2012/10/14 21:03:28 9C96E30 c client connected to 10000 port
2012/10/14 21:03:28 9C96E30 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
2012/10/14 21:03:28 9C96E30 c user cccam authenticated successfully (CCcam)
2012/10/14 21:03:28 9C96E30 c AU disabled for user cccam
2012/10/14 21:03:32 9C96E30 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0
2012/10/14 21:03:37 9C96E30 c cccam (0963&000000/0000/0FA3/6A:26F0): timeout (5000 ms)
2012/10/14 21:03:37 9C925A8 c client connected to 10000 port
2012/10/14 21:03:37 9C925A8 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
2012/10/14 21:03:37 9C925A8 c user cccam authenticated successfully (CCcam)
2012/10/14 21:03:37 9C925A8 c AU disabled for user cccam
2012/10/14 21:03:41 9C925A8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0

yep got that in my sub, ill try remove boxid now

No oscam.whitelis file exists, certainly not in /user/local/etc anyway

current webif log:

2012/10/14 15:55:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/14 15:55:48 0 s waiting for local card init
2012/10/14 15:55:48 B7300468 h HTTP Server listening on port 8888
2012/10/14 15:55:50 877C200 r reader1 [mouse] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=357, cardmhz=357)
2012/10/14 15:55:51 877C200 r reader1 [mouse] card detected
2012/10/14 15:55:55 877C200 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2012/10/14 15:55:57 877C200 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/10/14 15:55:58 877C200 r reader1 [mouse] Card type: SYAV
2012/10/14 15:55:58 877C200 r reader1 [mouse] Rom version: 40LF
2012/10/14 15:55:58 877C200 r reader1 [mouse] parental lock setting: 3F 00 0E 00
2012/10/14 15:55:58 877C200 r reader1 [mouse] type: VideoGuard B***B (0963), caid: 0963
2012/10/14 15:55:58 877C200 r reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
2012/10/14 15:55:58 877C200 r reader1 [mouse] ready for requests
2012/10/14 15:55:58 877C200 r reader1 [mouse] found cardsystem videoguard2
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] card detected
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] type: VideoGuard B***B (0963)
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 043a, expiry date: 2007/12/20-24:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 0003, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 000b, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 0010, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 001d, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e1, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e2, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e3, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e4, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e5, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b732, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b736, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b765, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b766, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b772, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b773, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b846, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b860, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b8d2, expiry date: 2012/11/23-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b968, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b991, expiry date: 2012/11/25-00:00:00
2012/10/14 15:55:59 0 s init for all local cards done
2012/10/14 15:55:59 0 s anti cascading disabled
2012/10/14 15:55:59 877E7C0 c client connected to 10000 port
2012/10/14 15:55:59 877E7C0 c anonymous disconnected from 127.0.0.1
2012/10/14 15:56:02 87815D8 c client connected to 10000 port
2012/10/14 15:56:02 87815D8 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
2012/10/14 15:56:02 87815D8 c user cccam authenticated successfully (CCcam)
2012/10/14 15:56:02 87815D8 c AU disabled for user cccam
2012/10/14 15:56:08 877C200 r reader1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/14 15:56:08 87815D8 c starting thread housekeeping lb stats
2012/10/14 15:56:08 87815D8 c housekeeping lb stats thread started
2012/10/14 15:56:08 87815D8 c cccam (0963&000000/0000/0FA3/6A:34DF): not found (98 ms) by reader1
2012/10/14 15:56:15 87815D8 c cccam (0963&000000/0000/0FA3/6A:ED39): rejected group (120 ms) (no matching reader)
2012/10/14 15:56:24 87815D8 c cccam (0963&000000/0000/0FA3/6A:CFCC): rejected group (120 ms) (no matching reader)
2012/10/14 15:56:32 87815D8 c cccam (0963&000000/0000/0FA3/6A:D06D): rejected group (120 ms) (no matching reader)
2012/10/14 15:56:40 87815D8 c cccam (0963&000000/0000/0FA3/6A:51B6): rejected group (120 ms) (no matching reader)
2012/10/14 15:56:48 87815D8 c cccam (0963&000000/0000/0FA3/6A:7BD7): rejected group (120 ms) (no matching reader)
2012/10/14 15:56:56 87815D8 c cccam (0963&000000/0000/0FA3/6A:34AF): rejected group (120 ms) (no matching reader)
2012/10/14 1557:04 87815D8 c cccam (0963&000000/0000/0FA3/6A:2D22): rejected group (120 ms) (no matching reader)
2012/10/14 1557:12 87815D8 c cccam (0963&000000/0000/0FA3/6A:AED5): rejected group (121 ms) (no matching reader)
2012/10/14 1557:20 87815D8 c cccam (0963&000000/0000/0FA3/6A:D4B8): rejected group (120 ms) (no matching reader)
2012/10/14 1557:28 87815D8 c cccam (0963&000000/0000/0FA3/6A:B6C9): rejected group (120 ms) (no matching reader)
2012/10/14 1557:36 87815D8 c cccam (0963&000000/0000/0FA3/6A:ACA2): rejected group (120 ms) (no matching reader)
2012/10/14 1557:44 87815D8 c cccam (0963&000000/0000/0FA3/6A:4687): rejected group (120 ms) (no matching reader)
2012/10/14 1557:52 87815D8 c cccam (0963&000000/0000/0FA3/6A:793E): rejected group (121 ms) (no matching reader)
2012/10/14 15:58:00 87815D8 c cccam (0963&000000/0000/0FA3/6A:96CB): rejected group (120 ms) (no matching reader)
2012/10/14 15:58:08 87815D8 c cccam (0963&000000/0000/0FA3/6A:7748): rejected group (120 ms) (no matching reader)
2012/10/14 15:58:16 87815D8 c cccam (0963&000000/0000/0FA3/6A:FAD0): rejected group (120 ms) (no matching reader)

oscam files:

oscam.conf
[global]
logfile = stdout
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 30
cachedelay = 120
bindwait = 12
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 50
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 2
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0
failbantime = 10
double_check = 1

[webif]
httpport = 8888
httpuser = myuser
httppwd = mypass
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000
allowed = 1.0.0.0-255.255.255.255
keepalive = 1
mgclient = 0

oscam.server
[reader]
label = reader1
protocol = mouse
detect = CD
boxid = 01234567
device = /dev/ttyS0
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
caid = 0963
ecmwhitelist = 0963:3E,42,44,45,47,4E,53,54,61,62,68,69,6A,6B,6D, 6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B,85

oscam.user
[account]
user = cccam
pwd = cccam
disabled = 0
monlevel = 0
uniq = 1
group = 1
sleep = 0
au = 0
keepalive = 1

did that, thats the info from after removing services, everything seems fine just keep getting this no matching reader message

extra info:

2012/10/14 1509:07 0 s init for all local cards done
2012/10/14 1509:07 0 s anti cascading disabled
2012/10/14 1509:07 8F996A0 c client connected to 10000 port
2012/10/14 1509:07 8F996A0 c anonymous disconnected from 127.0.0.1
2012/10/14 1509:10 8F9C9E0 c client connected to 10000 port
2012/10/14 1509:10 8F9C9E0 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
2012/10/14 1509:10 8F9C9E0 c user cccam authenticated successfully (CCcam)
2012/10/14 1509:10 8F9C9E0 c AU disabled for user cccam
2012/10/14 1509:15 8F97200 r reader1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/14 1509:15 8F9C9E0 c starting thread housekeeping lb stats
2012/10/14 1509:15 8F9C9E0 c housekeeping lb stats thread started
2012/10/14 1509:15 8F9C9E0 c cccam (0963&000000/0000/1070/62:3DEE): not found (93 ms) by reader1
2012/10/14 1509:23 8F9C9E0 c cccam (0963&000000/0000/1070/62:E574): rejected group (120 ms) (no matching reader)
2012/10/14 1509:30 8F9C9E0 c cccam (0963&000000/0000/1070/62:8700): rejected group (120 ms) (no matching reader)
2012/10/14 1509:39 8F9C9E0 c cccam (0963&000000/0000/1070/62:6E41): rejected group (120 ms) (no matching reader)
2012/10/14 1509:46 8F9C9E0 c cccam (0963&000000/0000/1070/62:E50F): rejected group (120 ms) (no matching reader)
2012/10/14 1509:55 8F9C9E0 c cccam (0963&000000/0000/1070/62:5E06): rejected group (120 ms) (no matching reader)

ok looking better: reading card again and cccam is showing as online, although still connecting to server with 1 card = no picture :(

2012/10/14 15:00:53 B7504128 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2012/10/14 15:00:54 9876528 c cccam (0963&000000/0000/1070/62:121C): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/10/14 15:00:54 B7504128 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/10/14 15:00:55 B7504128 r reader1 [mouse] Card type: SYAV
2012/10/14 15:00:55 B7504128 r reader1 [mouse] Rom version: 40LF
2012/10/14 15:00:56 B7504128 r reader1 [mouse] parental lock setting: 3F 00 0E 00
2012/10/14 15:00:56 B7504128 r reader1 [mouse] type: VideoGuard B***B (0963), caid: 0963
2012/10/14 15:00:56 B7504128 r reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
2012/10/14 15:00:56 B7504128 r reader1 [mouse] ready for requests
2012/10/14 15:00:56 B7504128 r reader1 [mouse] found cardsystem videoguard2
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] card detected
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] type: VideoGuard B***B (0963)
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 043a, expiry date: 2007/12/20-24:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 0003, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 000b, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 0010, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 001d, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e1, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e2, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e3, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e4, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e5, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b732, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b736, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b765, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b766, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b772, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b773, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b846, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b860, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b8d2, expiry date: 2012/11/23-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b968, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b991, expiry date: 2012/11/25-00:00:00
2012/10/14 15:00:59 9876528 c cccam (0963&000000/0000/1070/62:EAD9): rejected group (120 ms) (no matching reader)
2012/10/14 15:01:01 B7504128 r reader1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/14 15:01:01 9876528 c cccam (0963&000000/0000/0FA3/6A:8BE1): not found (98 ms) by reader1
2012/10/14 15:01:07 9876528 c cccam (0963&000000/0000/0FA3/6A:10EE): rejected group (120 ms) (no matching reader)

ok after adding mhz=500, cardmhz=500, startup log as follows:

2012/10/14 14:32:26 85DEFE8 r reader1 [mouse] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=500, cardmhz=500)
2012/10/14 14:32:27 85DEFE8 r reader1 [mouse] card detected
2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] WARNING: your card is asking for custom_baudrate = 53763, but your configuration can only deliver custom_baudrate = 57600
2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2012/10/14 14:32:33 85DEFE8 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/10/14 14:32:34 85DEFE8 r reader1 [mouse] card system not supported
2012/10/14 14:32:34 85DEFE8 r reader1 [mouse] Normal mode failed, reverting to Deprecated Mode
2012/10/14 14:32:42 85DEFE8 r reader1 [mouse] ATR: 00 00
2012/10/14 14:32:42 85DEFE8 r reader1 [mouse] ERROR: Could not read reader->convention
2012/10/14 14:32:42 85DEFE8 r reader1 [mouse] Error activating card.
2012/10/14 14:32:50 85DEFE8 r reader1 [mouse] ATR: 00 00
2012/10/14 14:32:50 85DEFE8 r reader1 [mouse] ERROR: Could not read reader->convention
2012/10/14 14:32:50 85DEFE8 r reader1 [mouse] Error activating card.
2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] ATR: 00 00
2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] ERROR: Could not read reader->convention
2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] Error activating card.
2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] card initializing error
2012/10/14 14:32:59 0 s init for all local cards done
2012/10/14 14:32:59 0 s anti cascading disabled

oscam files are as follows:

oscam.conf
[global]
logfile = stdout
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 30
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 50
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 2
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0
failbantime = 10
double_check = 1

[webif]
httpport = 8888
httpuser = myuser
httppwd = mypass
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 12345@0963:000000
allowed = 1.0.0.0-255.255.255.255
keepalive = 1
mgclient = 0

oscam.server
[reader]
label = reader1
protocol = mouse
detect = CD
boxid = 01234567
mhz = 500
cardmhz = 500
device = /dev/ttyS0
group = 1
emmcache = 1,3,2
services = services1
blockemm-unknown = 1
blockemm-g = 1
caid = 0963

oscam.user
[account]
user = cccam
pwd = cccam
disabled = 0
monlevel = 0
uniq = 1
group = 1
sleep = 0
au = 0
keepalive = 1
caid = 0963

N line in cccam.cfg
N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

excellent, that worked a treat!

now got:

2012/10/14 14:08:25 89B0200 r reader1 [mouse] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=357, cardmhz=357)
2012/10/14 14:08:26 89B0200 r reader1 [mouse] card detected
2012/10/14 14:08:30 89B0200 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2012/10/14 14:08:31 89B0200 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/10/14 14:08:33 89B0200 r reader1 [mouse] Card type: SYAV
2012/10/14 14:08:33 89B0200 r reader1 [mouse] Rom version: 40LF
2012/10/14 14:08:33 89B0200 r reader1 [mouse] parental lock setting: 3F 00 0E 00
2012/10/14 14:08:33 89B0200 r reader1 [mouse] type: VideoGuard B***B (0963), caid: 0963
2012/10/14 14:08:33 89B0200 r reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
2012/10/14 14:08:33 89B0200 r reader1 [mouse] ready for requests
2012/10/14 14:08:33 89B0200 r reader1 [mouse] found cardsystem videoguard2
2012/10/14 14:08:33 89B0200 r reader1 [videoguard2] card detected
2012/10/14 14:08:33 89B0200 r reader1 [videoguard2] type: VideoGuard B***B (0963

so reading card fine, only now when i go to users, it says my cccam is offline :/

UPDATE: removed boxkey and updated oscam, still no picture.

in oscam webif im getting this error message:

[smartreader] Wrong device format (/dev/ttyS0), it should be Device=bus:dev
2012/10/14 12:01:37 A0D7210 r ***uk [smartreader] Cannot open device: /dev/ttyS0

does that mean i have cofigured my card reader wrong? i have phoenix serial reader, ive tried both commands /dev/ttySO and bus:dev, none working

ok thanks man. how do i update oscam, sorry for the noobness :(

and also my N line in cccam.cfg is: N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

is there anything i need to change there?

Hey guys, im also having a go at setting this up as i also failed using ClearOS

Wondering you guys can help me out, try to get S** UK card working, got there server up and running, reading card, etc... only no picture

Here is my oscam config:

oscam.conf
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 8888
httpuser = myuser
httppwd = mypass
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

oscam.server
[reader]
label = ***UK
protocol = smartreader
device = /dev/ttyS0
#if you use smartreader and device with a bus id, hash out detect as its not needed.
detect = cd
cardmhz = 600
mhz = 600
boxid = yourboxid
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

oscam.user
[account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963

couple of things it could be, when i type command oscam .b i get this:

Warning: keyword 'resolvedelay' in global section not recognized
Warning: keyword 'keepalive' in global section not recognized
Warning: keyword 'debug' in webif section not recognized

And also im unsure of where to find boxkey?

no worries

Hey guys, new on here. Got a bit of a problem just wanna see if u guys can help me out a bit.

I've recently set up a Linux PC server using ClearOS, got the server up and running fine, set up card reader using command:

PHOENIX READER PATH : /dev/ttyS0

I've set up test fline for my dm800, and server is saying online with 1 card, so clearly the reader is doing its job however, im not getting any channels coming through :/

I've spent hours on forums trying different things, messing around with config, etc, etc. Not having any joy at all :(

Any help is appreciated.