Help with new Sly white card running ClearOS 5.2 CCcam/Newcs server

There are 38 replies in this Thread which was already clicked 5,077 times. The last Post () by Gillies.

    excellent, that worked a treat!


    now got:


    2012/10/14 14:08:25 89B0200 r reader1 [mouse] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=357, cardmhz=357)
    2012/10/14 14:08:26 89B0200 r reader1 [mouse] card detected
    2012/10/14 14:08:30 89B0200 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2012/10/14 14:08:31 89B0200 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] Card type: SYAV
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] Rom version: 40LF
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] parental lock setting: 3F 00 0E 00
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] type: VideoGuard B***B (0963), caid: 0963
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] ready for requests
    2012/10/14 14:08:33 89B0200 r reader1 [mouse] found cardsystem videoguard2
    2012/10/14 14:08:33 89B0200 r reader1 [videoguard2] card detected
    2012/10/14 14:08:33 89B0200 r reader1 [videoguard2] type: VideoGuard B***B (0963


    so reading card fine, only now when i go to users, it says my cccam is offline :/


    Good..


    Now add to the reader, mhz=500, cardmhz=500


    Then, post startup log like above together with oscam.conf, oscam.user and oscam.reader.
    Without, i can't analyse the cause.

    ok after adding mhz=500, cardmhz=500, startup log as follows:


    2012/10/14 14:32:26 85DEFE8 r reader1 [mouse] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=500, cardmhz=500)
    2012/10/14 14:32:27 85DEFE8 r reader1 [mouse] card detected
    2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] WARNING: your card is asking for custom_baudrate = 53763, but your configuration can only deliver custom_baudrate = 57600
    2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
    2012/10/14 14:32:31 85DEFE8 r reader1 [mouse] You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
    2012/10/14 14:32:33 85DEFE8 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
    2012/10/14 14:32:34 85DEFE8 r reader1 [mouse] card system not supported
    2012/10/14 14:32:34 85DEFE8 r reader1 [mouse] Normal mode failed, reverting to Deprecated Mode
    2012/10/14 14:32:42 85DEFE8 r reader1 [mouse] ATR: 00 00
    2012/10/14 14:32:42 85DEFE8 r reader1 [mouse] ERROR: Could not read reader->convention
    2012/10/14 14:32:42 85DEFE8 r reader1 [mouse] Error activating card.
    2012/10/14 14:32:50 85DEFE8 r reader1 [mouse] ATR: 00 00
    2012/10/14 14:32:50 85DEFE8 r reader1 [mouse] ERROR: Could not read reader->convention
    2012/10/14 14:32:50 85DEFE8 r reader1 [mouse] Error activating card.
    2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] ATR: 00 00
    2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] ERROR: Could not read reader->convention
    2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] Error activating card.
    2012/10/14 14:32:58 85DEFE8 r reader1 [mouse] card initializing error
    2012/10/14 14:32:59 0 s init for all local cards done
    2012/10/14 14:32:59 0 s anti cascading disabled



    oscam files are as follows:


    oscam.conf
    [global]
    logfile = stdout
    disablelog = 0
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    failbantime = 30
    cachedelay = 120
    bindwait = 120
    netprio = 0
    clientdyndns = 0
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 50
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    readerrestartseconds = 5
    lb_mode = 1
    lb_save = 0
    lb_nbest_readers = 2
    lb_nfb_readers = 1
    lb_min_ecmcount = 5
    lb_max_ecmcount = 500
    lb_reopen_seconds = 900
    resolvegethostbyname = 0
    failbantime = 10
    double_check = 1


    [webif]
    httpport = 8888
    httpuser = myuser
    httppwd = mypass
    httprefresh = 5
    httphideidleclients = 0
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255


    [newcamd]
    key = 0102030405060708091011121314
    port = 12345@0963:000000
    allowed = 1.0.0.0-255.255.255.255
    keepalive = 1
    mgclient = 0



    oscam.server
    [reader]
    label = reader1
    protocol = mouse
    detect = CD
    boxid = 01234567
    mhz = 500
    cardmhz = 500
    device = /dev/ttyS0
    group = 1
    emmcache = 1,3,2
    services = services1
    blockemm-unknown = 1
    blockemm-g = 1
    caid = 0963



    oscam.user
    [account]
    user = cccam
    pwd = cccam
    disabled = 0
    monlevel = 0
    uniq = 1
    group = 1
    sleep = 0
    au = 0
    keepalive = 1
    caid = 0963



    N line in cccam.cfg
    N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256


    OK..


    1) Remove:
    both mhz/cardmhz lines for now.. will optimize that later..


    2) Change:
    port = 12345@0963:000000 into port = 10000@0963:000000

    3) Remove:
    CAID= line from [user]


    4) Add to [reader]:
    ecmwhitelist = 0963:3E,42,44,45,47,4E,53,54,61,62,68,69,6A,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B,85


    5) Reboot the server to re-init CC-Cam


    6) Test & report back.

    Oh. and also remove services= line from [reader]..

    ok looking better: reading card again and cccam is showing as online, although still connecting to server with 1 card = no picture :(


    2012/10/14 15:00:53 B7504128 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2012/10/14 15:00:54 9876528 c cccam (0963&000000/0000/1070/62:121C): rejected group (120 ms) (0/0/0/0) (no matching reader)
    2012/10/14 15:00:54 B7504128 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2012/10/14 15:00:55 B7504128 r reader1 [mouse] Card type: SYAV
    2012/10/14 15:00:55 B7504128 r reader1 [mouse] Rom version: 40LF
    2012/10/14 15:00:56 B7504128 r reader1 [mouse] parental lock setting: 3F 00 0E 00
    2012/10/14 15:00:56 B7504128 r reader1 [mouse] type: VideoGuard B***B (0963), caid: 0963
    2012/10/14 15:00:56 B7504128 r reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
    2012/10/14 15:00:56 B7504128 r reader1 [mouse] ready for requests
    2012/10/14 15:00:56 B7504128 r reader1 [mouse] found cardsystem videoguard2
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] card detected
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] type: VideoGuard B***B (0963)
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 043a, expiry date: 2007/12/20-24:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 0003, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 000b, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 0010, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 001d, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e1, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e2, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e3, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e4, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: 30e5, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b732, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b736, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b765, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b766, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b772, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b773, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b846, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b860, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b8d2, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b968, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:56 B7504128 r reader1 [videoguard2] tier: b991, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:00:59 9876528 c cccam (0963&000000/0000/1070/62:EAD9): rejected group (120 ms) (no matching reader)
    2012/10/14 15:01:01 B7504128 r reader1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2012/10/14 15:01:01 9876528 c cccam (0963&000000/0000/0FA3/6A:8BE1): not found (98 ms) by reader1
    2012/10/14 15:01:07 9876528 c cccam (0963&000000/0000/0FA3/6A:10EE): rejected group (120 ms) (no matching reader)

    extra info:


    2012/10/14 1509:07 0 s init for all local cards done
    2012/10/14 1509:07 0 s anti cascading disabled
    2012/10/14 1509:07 8F996A0 c client connected to 10000 port
    2012/10/14 1509:07 8F996A0 c anonymous disconnected from 127.0.0.1
    2012/10/14 1509:10 8F9C9E0 c client connected to 10000 port
    2012/10/14 1509:10 8F9C9E0 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
    2012/10/14 1509:10 8F9C9E0 c user cccam authenticated successfully (CCcam)
    2012/10/14 1509:10 8F9C9E0 c AU disabled for user cccam
    2012/10/14 1509:15 8F97200 r reader1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2012/10/14 1509:15 8F9C9E0 c starting thread housekeeping lb stats
    2012/10/14 1509:15 8F9C9E0 c housekeeping lb stats thread started
    2012/10/14 1509:15 8F9C9E0 c cccam (0963&000000/0000/1070/62:3DEE): not found (93 ms) by reader1
    2012/10/14 1509:23 8F9C9E0 c cccam (0963&000000/0000/1070/62:E574): rejected group (120 ms) (no matching reader)
    2012/10/14 1509:30 8F9C9E0 c cccam (0963&000000/0000/1070/62:8700): rejected group (120 ms) (no matching reader)
    2012/10/14 1509:39 8F9C9E0 c cccam (0963&000000/0000/1070/62:6E41): rejected group (120 ms) (no matching reader)
    2012/10/14 1509:46 8F9C9E0 c cccam (0963&000000/0000/1070/62:E50F): rejected group (120 ms) (no matching reader)
    2012/10/14 1509:55 8F9C9E0 c cccam (0963&000000/0000/1070/62:5E06): rejected group (120 ms) (no matching reader)

    Quote from Gillies

    extra info:
    2012/10/14 1509:55 8F9C9E0 c cccam (0963&000000/0000/1070/62:5E06): rejected group (120 ms) (no matching reader)


    Remove services= line from [reader]...

    Quote from Gillies

    did that, thats the info from after removing services


    That's weird..


    Can you repost full oscam.conf / .user / .reader and startup sequence log as it is configured now ?
    Also, check if you use oscam.whitelist. This file should be empty/non-existent.

    No oscam.whitelis file exists, certainly not in /user/local/etc anyway


    current webif log:


    2012/10/14 15:55:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/10/14 15:55:48 0 s waiting for local card init
    2012/10/14 15:55:48 B7300468 h HTTP Server listening on port 8888
    2012/10/14 15:55:50 877C200 r reader1 [mouse] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=357, cardmhz=357)
    2012/10/14 15:55:51 877C200 r reader1 [mouse] card detected
    2012/10/14 15:55:55 877C200 r reader1 [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2012/10/14 15:55:57 877C200 r reader1 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2012/10/14 15:55:58 877C200 r reader1 [mouse] Card type: SYAV
    2012/10/14 15:55:58 877C200 r reader1 [mouse] Rom version: 40LF
    2012/10/14 15:55:58 877C200 r reader1 [mouse] parental lock setting: 3F 00 0E 00
    2012/10/14 15:55:58 877C200 r reader1 [mouse] type: VideoGuard B***B (0963), caid: 0963
    2012/10/14 15:55:58 877C200 r reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
    2012/10/14 15:55:58 877C200 r reader1 [mouse] ready for requests
    2012/10/14 15:55:58 877C200 r reader1 [mouse] found cardsystem videoguard2
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] card detected
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] type: VideoGuard B***B (0963)
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 043a, expiry date: 2007/12/20-24:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 0003, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 000b, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 0010, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 001d, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e1, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e2, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e3, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e4, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: 30e5, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b732, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b736, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b765, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b766, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b772, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b773, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b846, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b860, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b8d2, expiry date: 2012/11/23-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b968, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:58 877C200 r reader1 [videoguard2] tier: b991, expiry date: 2012/11/25-00:00:00
    2012/10/14 15:55:59 0 s init for all local cards done
    2012/10/14 15:55:59 0 s anti cascading disabled
    2012/10/14 15:55:59 877E7C0 c client connected to 10000 port
    2012/10/14 15:55:59 877E7C0 c anonymous disconnected from 127.0.0.1
    2012/10/14 15:56:02 87815D8 c client connected to 10000 port
    2012/10/14 15:56:02 87815D8 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
    2012/10/14 15:56:02 87815D8 c user cccam authenticated successfully (CCcam)
    2012/10/14 15:56:02 87815D8 c AU disabled for user cccam
    2012/10/14 15:56:08 877C200 r reader1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2012/10/14 15:56:08 87815D8 c starting thread housekeeping lb stats
    2012/10/14 15:56:08 87815D8 c housekeeping lb stats thread started
    2012/10/14 15:56:08 87815D8 c cccam (0963&000000/0000/0FA3/6A:34DF): not found (98 ms) by reader1
    2012/10/14 15:56:15 87815D8 c cccam (0963&000000/0000/0FA3/6A:ED39): rejected group (120 ms) (no matching reader)
    2012/10/14 15:56:24 87815D8 c cccam (0963&000000/0000/0FA3/6A:CFCC): rejected group (120 ms) (no matching reader)
    2012/10/14 15:56:32 87815D8 c cccam (0963&000000/0000/0FA3/6A:D06D): rejected group (120 ms) (no matching reader)
    2012/10/14 15:56:40 87815D8 c cccam (0963&000000/0000/0FA3/6A:51B6): rejected group (120 ms) (no matching reader)
    2012/10/14 15:56:48 87815D8 c cccam (0963&000000/0000/0FA3/6A:7BD7): rejected group (120 ms) (no matching reader)
    2012/10/14 15:56:56 87815D8 c cccam (0963&000000/0000/0FA3/6A:34AF): rejected group (120 ms) (no matching reader)
    2012/10/14 1557:04 87815D8 c cccam (0963&000000/0000/0FA3/6A:2D22): rejected group (120 ms) (no matching reader)
    2012/10/14 1557:12 87815D8 c cccam (0963&000000/0000/0FA3/6A:AED5): rejected group (121 ms) (no matching reader)
    2012/10/14 1557:20 87815D8 c cccam (0963&000000/0000/0FA3/6A:D4B8): rejected group (120 ms) (no matching reader)
    2012/10/14 1557:28 87815D8 c cccam (0963&000000/0000/0FA3/6A:B6C9): rejected group (120 ms) (no matching reader)
    2012/10/14 1557:36 87815D8 c cccam (0963&000000/0000/0FA3/6A:ACA2): rejected group (120 ms) (no matching reader)
    2012/10/14 1557:44 87815D8 c cccam (0963&000000/0000/0FA3/6A:4687): rejected group (120 ms) (no matching reader)
    2012/10/14 1557:52 87815D8 c cccam (0963&000000/0000/0FA3/6A:793E): rejected group (121 ms) (no matching reader)
    2012/10/14 15:58:00 87815D8 c cccam (0963&000000/0000/0FA3/6A:96CB): rejected group (120 ms) (no matching reader)
    2012/10/14 15:58:08 87815D8 c cccam (0963&000000/0000/0FA3/6A:7748): rejected group (120 ms) (no matching reader)
    2012/10/14 15:58:16 87815D8 c cccam (0963&000000/0000/0FA3/6A:FAD0): rejected group (120 ms) (no matching reader)



    oscam files:


    oscam.conf
    [global]
    logfile = stdout
    disablelog = 0
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    failbantime = 30
    cachedelay = 120
    bindwait = 12
    netprio = 0
    clientdyndns = 0
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 50
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    readerrestartseconds = 5
    lb_mode = 1
    lb_save = 0
    lb_nbest_readers = 2
    lb_nfb_readers = 1
    lb_min_ecmcount = 5
    lb_max_ecmcount = 500
    lb_reopen_seconds = 900
    resolvegethostbyname = 0
    failbantime = 10
    double_check = 1


    [webif]
    httpport = 8888
    httpuser = myuser
    httppwd = mypass
    httprefresh = 5
    httphideidleclients = 0
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255


    [newcamd]
    key = 0102030405060708091011121314
    port = 10000@0963:000000
    allowed = 1.0.0.0-255.255.255.255
    keepalive = 1
    mgclient = 0



    oscam.server
    [reader]
    label = reader1
    protocol = mouse
    detect = CD
    boxid = 01234567
    device = /dev/ttyS0
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    caid = 0963
    ecmwhitelist = 0963:3E,42,44,45,47,4E,53,54,61,62,68,69,6A,6B,6D, 6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B,85



    oscam.user
    [account]
    user = cccam
    pwd = cccam
    disabled = 0
    monlevel = 0
    uniq = 1
    group = 1
    sleep = 0
    au = 0
    keepalive = 1

    Try to remove boxid= line..


    Also, i see you are trying to open "*** Sports 3 HD".


    This channel is subscribed to your card i may hope ? :)

    took box id out, still connecting to card with cccam but now getting these messages:


    2012/10/14 21:03:13 9C925A8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0
    2012/10/14 21:03:18 9C925A8 c cccam (0963&000000/0000/0FA3/6A:34E9): timeout (5000 ms)
    2012/10/14 21:03:18 9C955D8 c client connected to 10000 port
    2012/10/14 21:03:18 9C955D8 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
    2012/10/14 21:03:18 9C955D8 c user cccam authenticated successfully (CCcam)
    2012/10/14 21:03:18 9C955D8 c AU disabled for user cccam
    2012/10/14 21:03:23 9C955D8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0
    2012/10/14 21:03:28 9C955D8 c cccam (0963&000000/0000/0FA3/6A:A361): timeout (5001 ms)
    2012/10/14 21:03:28 9C96E30 c client connected to 10000 port
    2012/10/14 21:03:28 9C96E30 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
    2012/10/14 21:03:28 9C96E30 c user cccam authenticated successfully (CCcam)
    2012/10/14 21:03:28 9C96E30 c AU disabled for user cccam
    2012/10/14 21:03:32 9C96E30 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0
    2012/10/14 21:03:37 9C96E30 c cccam (0963&000000/0000/0FA3/6A:26F0): timeout (5000 ms)
    2012/10/14 21:03:37 9C925A8 c client connected to 10000 port
    2012/10/14 21:03:37 9C925A8 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=off)
    2012/10/14 21:03:37 9C925A8 c user cccam authenticated successfully (CCcam)
    2012/10/14 21:03:37 9C925A8 c AU disabled for user cccam
    2012/10/14 21:03:41 9C925A8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0

    Quote from Gillies

    took box id out, still connecting to card with cccam but now getting these messages:


    2012/10/14 21:03:13 9C925A8 c DOUBLE CHECK FIRST CW by reader1 idx 0 cpti 0


    Wow.. Mate.. Why do you have so much non-default settings.. :-)


    Remove doublecheck= line from oscam.conf.. and retry..

    got the server all up and running on my dm800 on my own network everythin is fine, went to add cline to friends box and says server offline :(


    opened port 12000 on my router and command SERVER LISTEN PORT: 12000 in cccam.cfg, still no luck


    one thing after another!

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login