Posts by kari

Hi there
I got an Blade Stream HD iptv here, and to me this looks like a Mag250
Since my blade media is now not anymore used and have no connection to blade media server, is it there any other possibilities with this box
can this be converted to any other box ?? is there any how to or software how to do this.

I will like to use this box and add my own iptv lines , or free iptv i find on internet, but cannot do this now as the box is just blocked

the software in there does not allowe me to add anything , and this is why i like to convert it to something else

thanks for any help

I have try to see if i can telnet but sadly it is not possible as it does not get an IP from my router, and even if it gets one i did not find out what IP it gets here on my house
We try to telnet even on the home of my friend that i was visiting but with no success

I know the how to for Duo as i have donne it before, but this is not same for uno, if i knew what capacitor needs to be changed in UNO i will do it, but I'm not sure of this

Yes yes i try to ref lash with USB and RS232 with no avail :-(

Ok I'm back
I invited my mates to my house and asked them to bring both boxes here and one windows PC.
First we try to reføash the boxes with NFI original image but with no success, so then i open up my UNO took out the PSU from this one, added this to one of the damaged boxes but still red light comes on.
we tested on second box and is still the same problem red light stays on but no life on the box,

i then try both PSU from damaged boxes into my own UNO and both of them work perfectly

So in the end we come to the conclusion that there must be a problem with BH image, or some capacitors that needs to be changed.
Im sorry for my mates and actually give them 2 of my own boxes as I'm not suing them right now, and hope for a solution so they can fix their boxes.
this boxes are buy from Germany some time back including 2 of mine, i have no problem with mine but my mates are.

I wish and hope some cleaver guys can help, i wish that VU+ will replay to how we can fix this problem,
Seems there is no help to get from the German distributor as he do not accept use of third part images as he called BH, if we had Original image and this had happened then we have full warranty, but since we have used BH we have nothing it seems

There must e a way similar to DUO that buy replacing one capacitor the DUO works, this could be possible for UNO to, it is just that we do not know how and what to look for.

anyway thank you all that try to help out

Boxes are definitely Original as they are bought from Vu+ dealer, both boxes are from same supplier
i have A uno box my self but i run OpenPli image on it my self, but right now i use Sezam Marvel box.

i will try and take out the PSU from my box and test on this 2 others that now have got red light problem
after i test the PSU i will replay here again :-)
thank you for trying to help out, much appreciated

Hi and thanks for the replay

It is getting very strange now, another friend has got the same problem with Vu+ Uno,
He has BH 2.0.8 installed and yesterday while i was on visit to him the strange thing happened, his box froze totally and on display come only the red light again.
we try to ref lash the box but usb seems to not react at all.

We try to flash his box with rs232 but there is no respond from the box at all.

If it is a power supply problem, then sure this is possible to fix, but what component needs to be replaced ? maybe there is a problem like Duo that gets red light and by changing the C807 capacitor.
is there maybe a way for Vu+ Uno similar to the Duo.

Hi and happy new year and thanks for the replays
my problem is that is do neither me or my mate own a windows pc, we run on mac pc , and this is somehow troublesome for us

i have been searching for a vu+ utility for mac but there seems to be none.

Yes he runs last BH 2.0.8 and me to think there is some trouble with this image.

Hi and happy new year to all.
A mate of mine have a Vu+ Uno that has sunndely turned into a problematic box.
The box was flashed with BH image last one, and have been working good for the past few days.
Last evening he sets the box into standby , today his box is not responding anymore and has only a red light in the front panel
We have try to re-flash the box but seems the usb with the image is not being read at all.

Now the million question is, is there a way to fix this box ? any capacitor to be changed and fix this box.
I have fixed few Duo boxes before, but i never heard or seen a problem with UNO and red light.

i hope for some help

I have got my self a Test box from this company and LX2 with 2 dub-s2 plus an extra dvbt2 , all i can say is a fantastic device with I'm now running on OpenPli image :-)
Fast and stable box , runs OScam and Mgcamd very well, tested CCcam to and runs as any Mips receiver

After some tests i sold my Duo2 as was just a lot for the money, Now LX3 / and Sezam Marvell are totally the same, i have got here on the test bench an Marvel box, with 4 tuners connected
Sezam is sold in Russia while the LX3 is for the German marked as it seems.
Fantastic receiver this Sezam Marvel, and this made me sold my DUO2 as this gives me much for the money :-) Now remember mine is a test box / Beta as they say but for the money i got it is a cracking receiver and this will for sure take over DUO2 if they do not make some price adjustment

Runing now on EGAMI image, this is stable as rock. One thing i liked a lot about this Marvel box is the possibility to have HDMI IN and Out , so now i can connect another device via the receiver.

Ekkostar, im quite sure i know this mate , being over 30 years on the sat sceen i know how things works.
what i mean is that the PrismCube is slow not becouse it is early but becouse it has low power/juice under the hood

Im sure that to compare the E2 with the XBMC is maybe wrong on my part, but right now the box is way to unstable according to me
i give my test box to a friend of mine yesterday as he have been using XBMC on his PC for long time, and after 30 min he call me up and as to come and pick up this **** as he sayed

Im sure and i mentioned that it is early to make any desitions, and im sure things will improve in 3 to 6 months

Well for me the Prismcube is to unmature to be released to the marked
I have got a free sample for test and it is not to be compared with DUO2 or SOLO2
Box hangs very often, there is very little support for it, runs very very very slow compare to Enigma2 boxes i have tested
Right now there is not much for this box, but being new it will for sure improve.

I do like it that there is so many choises and the XBMC is fantastic to have at list for me, but i hope Marusys delivers a bitt beter performance / drivers soon

MGcam works fine here, see the config files maybe you have donne something wrong

Found out of it.
To manualy install the Softcams you need to loggin to FTP with port 2121 to see the folder struckture, then just add the files above to the TMP folder and manualy install from BH.

how do you install this softcams ?

thanks

Softcam Oscam & MGcamd for BlackHole Prismcube

How to install this pluggin ?

i to buy this jtag, but i cannot connect the jtag with vu+ solo or duo
i use win7 but i do not think this matters.

is there a step buy step guide how to connect the Studio 3

i to will say that GigaBlue box are fairly good boxes.
Here i have tested both the Vu+ Solo and the GigaBlue SE with sat and cable/terresial tunner, and to tell you the truth i find the Gigablue more suitable to my needs, as i can have the terresial channels at same time, and for the Price it is a bargain. remembert the support is good on this box to, as now more and more teams are supporting this box. about the prossessor well they are totaly same as Vu+ solo.

this is how when a Company do not give information to costumers. Vu+ knows what the Jtag is, but they supplie only the dealers with this. End costumer have to wait or send the bad boxes back to dealer and wait for repair
Bad ways to make us happy.

Nice tuto, thank you Mister G, i will also re-read this post and try to make something out of this

i have oen of this readers, but im havving troble to setup with OSCAM
can some one help me with some smargo config for oscam, so i can see if this works