Posts by A5ian300zx

Can you record and timeshift with a USB Stick/HDD like the on the Z8?

is it worth trying different software protocol?

Cccam 2.3.? or MGcamd?

I have emailed them.

Thanks

log attached.

you think the issue is on the server end?

under LNB/Reader it says no DATA

2018/03/12 20:13:39 18425F9B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 050E ANY CHID PMTPID 0100 VPID 091F

2018/03/12 20:13:39 18425F9B c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0961 PROVID 000000 ECMPID 050E ANY CHID PMTPID 0100 VPID 091F

2018/03/12 20:13:39 18425F9B c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 050E ANY CHID PMTPID 0100 VPID 091F

2018/03/12 20:13:40 18425F9B c (ecm) linuxsatsupport (0963@000000/FFFF/CC1A/63:26DB2D5481F0C753251A8AFD4D7D1081): not found (1 ms) by sly - SYFY

2018/03/12 20:13:40 18425F9B c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 3 enabled and 0 disabled ecmpids!

2018/03/12 20:13:40 18425F9B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

Does the hosting server need to have any special settings for ARM based 4K boxes?

there is one line that i need in my config for it to work and does not work without it

oscam.server

disableserverfilter = 1

not sure why but with the above I get a picture but still constant freezing and loosing audio.

Tried what you sent me and also installed the version of oscam you attached and all I get is a blank screen.

is the oscam path correct?

My config setting i copied above were the only ones that worked for me.

Thanks

Hi,

My oscam constantly keeps freezing on premium channels (not free to air) and I have tried many different configuration and even various versions of oscam and even tried oscam config creator 2. This is really annoying and any help would be appreciated.

Box: Vu+ Ultimo 4K

Image: OpenVix 5.1.019

Oscam: Latest version 1.20+svn11398-r1 (also tried MasterG oscam-11284-linuxsat)

Oscam location

etc/tuxbox/config

Oscam.server

[reader]

label = vm

protocol = newcamd

device = DNS,PORT

key = 0102030405060708091011121314

user = USERNAME

password = PASSWORD

inactivitytimeout = 30

connectoninit = 1

caid = 1841

ident = 1841:000000

audisabled = 1

disableserverfilter = 1

fallback = 1

group = 1

emmcache = 1,3,31

blockemm-unknown = 1

blockemm-g = 1

saveemm-u = 1

saveemm-s = 1

[reader]

label = sly

protocol = newcamd

device = DNS,PORT

key = 0102030405060708091011121314

user = USERNAME

password = PASSWORD

inactivitytimeout = 30

connectoninit = 1

caid = 0963

ident = 0963:000000

group = 1

audisabled = 1

disableserverfilter = 1

fallback = 1

emmcache = 1,3,31

blockemm-unknown = 1

blockemm-g = 1

saveemm-u = 1

saveemm-s = 1

Oscam.Conf

[global]

disablelog = 1

logfile = /dev/null

clienttimeout = 10000

fallbacktimeout = 15000

nice = -1

preferlocalcards = 1

keepalive = 1

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

user = tm

boxtype = dreambox

[webif]

httpport = 8888

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255

http_status_log = 1

Oscam.User

[account]

user = tm

au = vm

group = 1,2

caid = 0963

ident = 0963:000000

Oscam.dvbapi

#

# dvbapi configuration

#

# format:

#

# priority:

# P: CAID[:][provider ID][:][service ID][:][ECM PID] [continue]

#

# ignore:

# I: CAID[:][provider ID][:][service ID][:][ECM PID]

#

# wait:

# D: CAID[:][provider ID][:][service ID][:][ECM PID] delay

#

# map:

# M: CAID[:][provider ID][:][service ID][:][ECM PID] target CAID[:][target provider ID]

#

# lenght:

# L: CAID[:][provider ID][:][service ID][:][ECM PID] length

#

P: 0963 1

P: 1841 1

#P: :000000 # prioritise ECM with provider ID 1234 on

# on any CAID and service

#P: 0100 # prioritise CAID 0200

#P: 0300::9ABC # prioritise CAID 0300 on service 9ABC only

#M: 0400 0500:123456 # map CAID 0400 to provider ID 123456 with

# CAID 0500

#D: 0600 200 # wait 200 ms before writing CW for CAID 0600

#I: :654321 # ignore provider ID 654321 for every CAID and

# service

#I: 0 # ignore every CAID that was not handled before

#L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal)

Any help would be appreciated or can I use a different protocol like MGcamd / Ncam ?

+1

for plex and catchup TV apps (UK) like BBC, itv player, etc.

I know dreamplex is available but i dont like the GUI and is not that good.

Thanks

Hi,

Thanks for that.

So what does the loop through cable do? As I thought it was for this purpose.

Thanks

Hi,

i have just installed a 2nd tuner and would like help in setting it up the best way.

at the moment i have it connected via loop through cable but I have noticed a 1 sec freeze every now and then but I read that you can do an internal loop back connection which works better than the cable, is this true?

At the moment physical sky connections goes to the first tuner IN port and the second cable goes to the second tuners OUT and the rest is connected via loop through. have i got this right as i did follow the manual, but i same i read somewhere that both physical connections would be on IN and the loop through on OUT.

I am using the Sky fixed dish with the same dual (shotgun) cable.

yes 2 x dual tuners. so i want to be able to record one channel and be able to time shift another while watching it mainly.

again any help is always appreciated.

Thanks

Figure it out it out. I removed previous version and installed the latest one on this thread.

Now just need to find out how to customise it. I have downloaded the spreadsheet but not sure how to make changes yet.

Thanks

when i go to provider, I just have one option which us SKY ROI but i need SKY UK how do I add Sky UK instead on ROI?

Hi,

I have extacly the same issue,

OpenATV (version 5)
oe alliance autobouquetsmaker 2.3 (part of the image)

I lost all my Bouquet categories except couple HD Channel, all channels, favourites.

when i go to oe alliance autobouquetsmaker all the options are just blank i.e. hide channels has no lists.

Thanks

I won't be asking questions if I was not interested but at the same time there are no trader feedback on here. Hence why I normally buy of Avforums and recently bought a duo 2 inc 500gb hdd for £200 inc delivery for my sister. I was thinking of making an offer and picking up the item for another family member hence why I wanted to know where in London you are based. You can pm me the area if you like.

Thanks

Hi,

Where abouts in south London as I'm based in North London?

Thanks

does it have HDD? how old is it? where about's in the UK are you located for possible pickup?

Thanks

Hi,

thanks for the reply. the answer to that would be NO as i have assigned a static IP address to the Duo2.

192.168.1.200

Nice high range

what background processes run on the box or is there anyway to view it on the box?

I might have to get wireshark and see whats happening.

Thanks

- - - Updated - - -

Stop MGcamd 1.38d for openATV and started working fine, I have downloaded v1.37 and activated that and all is working fine now.

Hi All,

75Mbps Fibre from which my router syncs at 70Mbps

Installed image backup of DirtyDonki OpenATV 5

additional items installed are Kodi direct, MGcamd 1.38d.

i noticed my internet connection being really slow so i thought ill do some speed tests and ping test etc.

now with speed test i noticed I am only getting around 1-5Mbps - 10Mbps Download and upload 0.2Mbps or errors out. So i disconnected my duo2 network cable and behold my speeds back to normal 68Mbps download and 18-20Mbps Upload.

What could be causing the Duo2 to suck up all the bandwidth? or do i have faulty player? anyone else come across this?

This is happens regardless if the player is on or on standby and i have rebooted the router and also the Duo2 network adaptor and still the same issue.

any help would be appreciated.

Thanks

this looks awesome with plenty of info.

would i need to install all the IPK?

Thanks

Hi,

can you use the navigation tabs to go to different sections.

Thanks

Hi,

I have tried out the following, so this is only my opinion

1.) Vix latest build - I found it to crash couples times so was not very stable and lost my EPG data.
2) Black Hole 2.1.5 - its good image but not for my liking
3) OpenATV - very good image and very configurable
4) OpenPli - good and stable not as customisable as the rest in terms on EPG data but does not use crossEPG :)

so at the moment i am on OpenPli 4.2 MasterG version which is really good.

Thanks