Display MoreComfySofa , eurosport hd clears on nc card, hotbird 13e.
Also in english.
Card cost me €250 from satsklep (11 sports option), is sharable (seca) and has a good selection of channels, all in hd
do i need anything other than a motorised dish and vuduo to use this?
Also are all channels in english?
Posts by hitman07
-
-
is there a list of what ones should be available?
did u lose any channels from your card then Seasider?
-
which type of box should i look for if i ever needed to pair card as i dont have my original sky box?
TIA
-
is there a list of what ones should be available?
also is there a way of forcing through an expired tier
-
Im getting this on a my oscam log also
can someone tell us how many entitlements you should have on slyuk, my card is saying 19, is that correct or should there be more?
-
I can't access my cccam webif from outside my LAN. I have opened the required webif port but i cant access it from outside the lan
Do i need to add a line in the cccam.cfg so that it will let me connect to it via my hostname or anything?thanks in advance!!!
-
i have a file called list_smargo as well as the oscam binary file downloaded and ftp'd to the softcams section
what does this file do or should it go in a different location?
-
hi mate, i sent you a pm with my logs on it after i tried last night.
-
ps the smargo reader is called: smargo smartreader+ plus usb card reader for dreambox vu+ linux or windows
also on the smartcardreader.exe there is no option for FREQ -nan Mhz
-
do i not have it programmed correctly mate?
-
i pointed the smargo to the drivers folder were i downloaded them and then i set it as follows in smartcardreader.exe
mode = Autoswitch
kernel = dreambox
t-mode = 0
egt = 0 -
no this is the first time i have tried the smargo mate
maybe the smargo isnt programmed correctly but wheni installed drivers it waid write successful so i took it that its ok
-
this is what i get:
Code
Display More[AUD]: AUDIO_SET_MUTE 0 [AUD]: AUDIO_SET_MIXER -2005688856 [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [AUD]: AUDIO_SET_MIXER : next left volume -200, right volume [AUD]: AUDIO_SET_MIXER -2005688856 [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [AUD]: AUDIO_SET_MIXER : next left volume -200, right volume [AUD]: AUDIO_SET_MIXER : next left volume -200, right volume Adding 98300k swap on /media/hdd/swapfile. Priority:-1 exte FE tune [AUD]: AUDIO_SET_BYPASS_MODE 0 [AUD]: AC3 downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:10 [VID]: VIDEO_GET_SIZE aspect: 1 1 [VID]: VIDEO_SET_STREAMTYPE 1 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 5 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c025fc [AUD]: setting mute : 0 [AUD]: AUDIO_CHANNEL_SELECT 0 bcm7335: hotplug_callback(): Hotplug - status.connected 1 bcm7335: hotplug_callback(): Hotplug - connecting HDMI to display 0xf [SC]: !!!unknown cmd 0x5407 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 FE tune [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c025fc [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [SC]: !!!unknown cmd 0x5407 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 [AUD]: AUDIO_SET_BYPASS_MODE 0 [AUD]: AC3 downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 1 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 5 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0259c [AUD]: setting mute : 0 [AUD]: AUDIO_CLEAR_BUFFER 1 0 [VID]: VIDEO_CLEAR_BUFFER 1 1 1 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [SC]: !!!unknown cmd 0x5407 [SC]: !!!unknown cmd 0x5407 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 FE tune [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c025fc [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c025fc [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 [AUD]: AUDIO_SET_BYPASS_MODE 0 [AUD]: AC3 downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 1 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 5 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0259c [AUD]: setting mute : 0 [AUD]: AUDIO_CLEAR_BUFFER 1 0 [VID]: VIDEO_CLEAR_BUFFER 1 1 1 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [AUD]: AUDIO_CLEAR_BUFFER 1 0 [VID]: VIDEO_CLEAR_BUFFER 1 1 1 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 FE tune [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0268c [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0268c [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 bcm7335: hotplug_callback(): Hotplug - status.connected 0 bcm7335: hotplug_callback(): Hotplug - Disconnecting HDMI from display bcm7335: hotplug_callback(): Hotplug - status.connected 1 bcm7335: hotplug_callback(): Hotplug - connecting HDMI to display 0xe usb 3-2: new full speed USB device number 2 using ohci-brcm usb 3-2: USB disconnect, device number 2 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 FE tune [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0265c [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0265c [AUD]: setting mute : 0 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 2 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c0268c [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [VID]: VIDEO_STOP 1 1 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 aph=0x0 [AUD]: AUDIO_CONTINUE aph=0 0 0 FE tune [AUD]: AUDIO_SET_BYPASS_MODE 0 [AUD]: AC3 downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 1 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 5 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c025fc [AUD]: setting mute : 0 [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [VID]: VIDEO_GET_SIZE aspect: 1 0 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 aph=0xc0c025fc [AUD]: setting mute : 0 usb 4-1: new full speed USB device number 2 using ohci-brcm usb 4-1: USB disconnect, device number 2 usb 4-1: new full speed USB device number 3 using ohci-brcm root@vuduo:~#
-
Welcome to OpenViX for vuduo
openvix 3.0 vuduothis is what i get mate:
vuduo login: root
Last login: Wed Jan 29 12:37:20 +0000 2014 on /dev/pts/0.
root@vuduo:~# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 004 Device 002: ID 0403:6001is that whats meant to appear?
-
ok so i should insert the smargo with the card in it and then telnet to the box and get the correct output for smargo yeah?
or can i insert the smargo without the card in order to get the output from telnet?
sorry if i sound dumb here i just want to make sure im doing it correctly
-
ok i will ftp the 2 files over and chmod them both to 755 and erstart when i get a chance
does it matter that the filename in the download is only names oscam?
also do my config look ok?
-
ok do i then just fpt both of the files to usr/softcams and start oscam in the softcam menu with smargo inserted?
-
ok do i then just fpt both of them to usr/softcams?
-
maybe i am doing something wrong dudes but i get this error when putting in the smargo reader to my vuduo on vix 3.0 running oscam. Hope someone can help. Smargo is 1.3version of drivers also.
i get this error in the log:
2014/01/29 09:47:03 0 s waiting for local card init
2014/01/29 09:47:03 563280 r smargo [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2014/01/29 09:47:03 563280 r smargo [mouse] Cannot open device: /dev/ttyUSB0
2014/01/29 09:47:03 549638 h webif: decompressed 56693 bytes back into 163848 byteshere is my configs:
oscam.server
[reader]
Label = smargo
enable = 1
protocol = mouse
device = /dev/ttyUSB0
services = xxxx
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-s =
blockemm-g = 1
lb_weight = 100oscam.user
[account]
user = localuser
pwd =
uniq = 2
monlevel = 1
caid = 0963
ident = 0963:000000
group = 1,3,4,5
au = ***uk
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 0
blockemm-s = 0[account]
user = user1
pwd = pass1
group = 1,3,4
uniq = 1
services = xxxxx
caid = 0963
ident = 0963:000000
keepalive = 1[account]
user = user
pwd = pass
group = 1,3,4
uniq = 1
services = xxxx
caid = 0963
ident = 0963:000000
cccreshare = 0
keepalive = 1oscam.conf
[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1[cccam]
port = xxxxx
nodeid = 58618D5810561438
version = 2.1.3
reshare = 1
ignorereshare = 1
stealth = 1[dvbapi]
enabled = 1
au = 1
user = localuser
boxtype = dreambox -
i updated image on box to latest vix and latest oscam binary also but issue is still happening
i was thinking on buying an omnikey reader 3121 to use in the vu duo
is this possible to do and is there much setting up to get it to work?
or any other ideas as i really need to get up and running soon.