Posts by rikjaard-real

i was wondering just that myself the other day poorboy ! :02: i dont think they are however i'm sure someone here will know ! tbh i know they changed something last year at some point !

Rik

downloaded AMD net instal image ! made an iso disc image with Infra recorder ! Working .. .. . . .. . :beauty:

Rik

Probably a silly question given wot i'm doing ...... which is
trying to run debian on a compaq presario AMD athlon xp PC i have inhereted from mother in law after they upgraded ?
previously i made an i386 disc and used that to run debian from boot screen and all worked fine in a packard bell macine however the compaq does not seem to reconise that disc !
do i need to download the AMD version from the debian website ? any pointers at this stage would be appreciated aS i'm well out of my depth already ? i would like to se a usb stick this time too if thats easier !

Thanks

Rik

bbc 1 wales clearing here FTA freq 10788 symbol rate 22000 polarization Vertical FEC 5/6

check your tuning menu and perform manual scan with above details !

hope that can help ! Rik

i have an original smargo but never had much success wiv it as my main reader when it was attched to debian server running cccam !
i found it would just stop reading the card randomley without warning ! ! !

Keep us informed on your progress Derrhunter ! ? :confident::40_002:

Rik

BUzzin ! it worked through winscp ! it let me log in as root that way ! filezilla wont allow me a root login !
Thanks Ten Below and Neil i really do appreciate your time and patience !
Cs studio is an interesting program i need to work with it more ? the instruction video i have is in russian ?

Thanks once again linuxsat-support forum ! now for some N -Lines and 256 tricks !
yeah i'm running cccam 213 ! time for a joint ! :78:

Rik

hey guys i'm still not having much luck .............. i keep getting this responce from filezilla ?

Command: STOR CCcam.x86
Response: 553 Could not create file.
Error: Critical file transfer error
Status: Disconnected from server

i tried logging into debian wiv filezilla as root but it doesn't let me in ? only lets me in as cccam user ! does that make a difference !
thanks for your help guys

Rik

oki doki !
i have searched my entire debian server and the only cccamx86 i can find is in /emu/cccam ?

do i have to run a kill command before attempting to swap a x.86 file and performing chmod ?
sorry to waste evryones time being so incompitant........just when i thought i was getting the hang of things :tire: lol

Rik

is it ok to run putty and filezilla plus firefox all at the same time ? :after_boom: ?

i look wiv filezilla ther but it says empty directory ! cos i thought i seen cccam x86 in emu/cccam i replaced it there !

everything is still working after a reboot through putty but it is still cccam 214 lol ?

Rik

sorry mate how do i chmod it ?

is it >>>>>>>>> chmod 755 /emu/cccamx86 ? im not sure

i transfered wiv filezilla !

Rik

hello

how i can downgrade my debian6 cccam 214 to cccam 213 ! i know i must change the x86 file but i'm clueless guys !
i would like to undertake this so i can make my locals show as Local cos at the moment they're not wiv 214 ? and so it looks like im a faker ?

i need to add 256 to my N lines too !

i have tring card in tm800
i have sly card in eagle

both connect to cccam 214 in debian server ! but this shows as hop1 to my peers ? gutted no-one likes to share wiv me even though i'm actually pretty solid so to speak just very novice !

Thanks
Rik

i think you will use N: line for Oscam to Oscam ! not 100% sure just wot i think !

Rik

Nearly forgott i had to add user in oscam user.file

[account]
user = user
pwd = pass
group = 1
au = Tring
caid = 0baa
cccmaxhops = 0
cccreshare = 3
cccignorereshare = 0
keepalive = 0

This method allows cccam to connect to oscam ! the example is using port 18881

Thanks for all the help i have been given when using this forum i hope this might help someone !

Rik

i added the following code to the oscam config in Tm800 then made a share from debian server running cccam 214 wiv the following line

[cccam]
port = 18881
reshare = 2
ignorereshare = 1
forward_origin_card = 0
version = 2.1.4
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 1

then made a share from debian server running cccam 214 wiv the following line
C: (ip-of-Tm800) 18881 user pass

Now my clients can see Tring ! already my brother did text to say its clearing ! Thanks MasterG :59:

i am using oscam in Tm800hd to read tring card ! works fine !
my problem is that i have debian server running cccam !
so i put N line in debian server and that shows connected but debian server clients cant clear tring ?
i am using MasterG oscam + cccam for tring configs

sorry to be so thick i'm just not getting it ?

thanks for any pointers people

Rik

>>>>>>>>>>>version OSCAM100r3960
>>>>>>>>>>>>>>tm800hd andromeda image

Does this oscam have web iF ability wiv tm800hd ? i am using masterG configs for oscam+cccam Tring set-up !

tried to log in just says "unable to connect"

do i have to add summit manually to get a web interface wiv this box/oscam version ?

Rik

that does seem high to me mate ! my highest ecm time is 0.86ms ! though i am no expert ! ! !
i'm sure i read somewhere that high ecm times can ocur when using smargo and that a powered usb hub did help reduce them ? i have no idea why just summit i read ? perhaps someone else hear does already know ? i think 3325ms is very slow ?

Rik

There is usually a chart at the back of the motor manual which gives you the correct DISH elevation setting according to the Motors Elevation !
ie
for me...... my motor elevation is set to 51.5 north which means my dish Elevation has to be set to 27.5 according to the chart i had !
this settings can be made prior to the installation along wiv the usuals set up ! if you follow the instructions correctly you should only have to align the dish on the moter to 1 reference satellite ! and this would be done by moving only the motor left or right on the pole cos the dish will be set to its position on the motor already wiv usuals !

Like glenviewjf said

Quote

throw up the dish and motor

and then you will have a reference point to work from !

i would use 13e or 28e as a reference point cos they're both pretty strong signals to find in the uk !

Rik

here is a link to my very rough guide. . . . . being Plumb is key to a spot on motorised install !

http://linuxsat-support.com/sh…sed-set-up.html#post19204

After a recent move i had the pleasure of re-installing my motorised satellite dish ! :dribble:
first i did make sure the pole was plumb
d54a589cfd0b07.jpg
too make sure the pole is plumb i checked both sides at right angles
6278c04cc83e6716f.jpg
After everything is plumb and tight with spanners,the pole and brackett is ready to accept the dish !
At this stage the dish should be attached to the motor ! And i always use U.S.A.L.S and set longitude & latitude then drive dish to 28.2e
8d69e6350683476108.jpg
all that is needed now is to align dish to 28.2e hand tight everything ! go inside and check arc to ensure other sats are being recieved ?
If you got it spot on you should now have the ability to receive all sats with given dish size ! i have 78cm triax and got a good arc 30e-30w
ad89ef068bdc79c145a8c36.jpg
here is finished dish install !

perhaps later i can upload some screen shots from various sats along my arc ! welcome10

Rik

though they're not strictly linux boxs they're alot more user friendly wiv regards "end user" .... i think some people like us want to play around wiv the box more than watch tv so were more suited to the in depth linux stuff !