Probably more to do with extra processing that the DM800 does.
Hd receivers are always slightly behind Sd in my experiance ! Yes this can be annoying ! Almost certainly down to encoding/decoding time !
it would be interesting if we could delay the broadcast signal ! wouldn't that give us more time to receive an ecm emm ! ect ? or am i talking sprite again
Rik
other is just normal aerial lead from older telly in conservatory
Any advice ??
Carmine
The HD FREEVIEW box most likely doesn't have a modulater ! which means you cant tune the tv in the conservatory to an RF (mhz) frequency cos the box isn't making one !
You need a 2and cheap feeeview box for the conservatory to keep things simple and cheap or else its long scarts or HdMi cables and splitters ? :59:
Check on the Hd Freeview spec to see if it has a modulator ! what box is it anyhowz mate !
Rik
Go for the best you can afford mate or you may regret it later.
Bigger is better i'm afraid ! you'll never look up and think " i wish i got a smaller one " ! there isn't a huge price gap ! At least 1m i say !
Rik
just going through it again now thanks Ten Below !
just got to sit back and wait and see now . . . .as i understand it all should be sorted ! Thanks once again for your Support ! beer10joint10:40_002:
Rik
Thankyou very much Ten Below
Status of Dynamic DNS service update utility: ddclient is running.
will this program automaticly start again when i do a reboot on the server ?
i currently do a manual reboot on the server via putty from my laptop or via ssh login from another linux machine
will i need to manually re start ddclient ?
thanks for all your help !:48_002:
Rik
i use dyndns and found via settings panel it is possible to check "host update logs"
which gives me this responce ..............................
Displayed are your 100 last updates within the last 5 days. Log entries may take 10-15 minutes to appear.
Time Request Client Response
Sep-30 13:50:35 hostname=mydomainname.dyndns.org
myip=000.158.99.000
system=dyndns
ddclient/3.8.0 nochg 000.158.99.000
Sep-30 10:48:37 hostname=mydomainname.dyndns.org
myip=000.158.99.000
system=dyndns
ddclient/3.8.0 nochg 000.158.99.000
Sep-30 07:49:11 hostname= mydomainname.dyndns.org
myip=000.158.99.000
offline=NO
system=dyndns
wildcard=OFF
BTHomeHub- nochg 000.158.99.000
Sep-29 01:47:22 hostname=mydomainname,mydomainname2.dyndns.org
myip=000.158.99.000
DynDNS-Client-Win32/4.1.6/Microsoft Windows XP Professional/IG=Y (using SSL) good 000.158.99.000
good 000.158.99.000
Sep-26 13:40:28 hostname=mydomainname1,mydomainname2.dyndns.org
myip=000.158.99.000
DynDNS-Client-Win32/4.1.6/Microsoft Windows XP Professional/IG=Y (using SSL) good 000.158.99.000
good 000.158.99.000
From this i think i can keep an eye on it and see if the "ddclient 3.8.0" does its job ! looks like it updated earlier when i first installed it and then after following the instructions in post#2 of this thread !
Rik
Thanks for sharing that dude its a very interesting site ! This has come about cos i changed over to ubuntu so no nlonger have the windows dyn updater tool which was pretty straight forward !
everything seems to be ok ! i spose i will find out sooner or later either way when my isp changes the IP number ?
Should i be making a cron job ?
Rik
Hello
i have followed the above tutorial and rebooted the machine !
my question is how do i know it working ! is there somewhere i can see if its running and updating ?
Rik
most tuners have a maximum input level ! l dont have a VU so i cant look at the specs !
if the signal is too strong coming out of the system amplifiers that could cause that kind of problem !
If the vu has a sensitive tuner it might not like the levels that are being recieved at the outlet if there above its maximum input threshold !
Lots of blocks have systems with varying levels depending where the flat is in relation to the systems switches/amps !
Try it out on another dish at your house to establish if it is the tuner or not !
Rik
oscam.server
Code:
[reader]
label = strong-nova
enable = 1
protocol = mouse
device = /dev/ttyUSB1
services = nova-3sid
caid = 0604
ident = 0604:000000,000001,000002,000003,000004
group = 1
ecmcache = 1
oscam.services
Code:
[nova-3sid]
caid = 0604
provid = 000000,000001,000002,000003,000004
srvid = 013d,013e,0161
i found this so far ! gonna have to get acces to the card for experimental purposes now !
i gather that somewhere i'm gonna need a boxkey for this ! so a little more searching on how thats done too !
Any further info would be appreciated !
apperently the above set-up is for three sids ?
thanks
ive been reading through the streamboard all day as i believe wot i need is there however i cant decipher the bits relevent to nova its pretty technical stuff !
i found that oscam cfg on another forum
Rik
Doomed! lol...
These guys have had no luck!
i couldn't agree more glenviewjf ! a real shame for those involved ! Will this finally deliver HD Tring i wonder ? :59:
Rik
that'll be great glenviewjf ! thanks dude :78: i take a look myself too and post back later !
cant believe my luck tbh . . . . . just walked into a pub local to me and there showing nova ? started chatting wiv landlord and bingo this comes about !
he payed alot of money for his subscription by all accounts :dribble: lol it will great to pull off a share with it :snicker:
thanks for the help :51_002::14_002:
Rik
i should add this is NOVA on hotbird !
thanks for the answer glenviewjf :11_002:
this guy says i can have his card if i can share it back to him and his other pub :65: he only has 1 card though lol:40_002:
i was surprised to find nothing about that card here on the forum ?
1 sid only ? that means it will only share one channell at any 1 time ?
Rik
hello
i couldn't find anything about NOVA card ? i have a pub landlord who has this card in an original box ! after chatting with him he says's i can use the card for sharing:21_002::78: but i'm not actually sure if it can be done ! Any help would be appreciated !
Rik
i never seen or used one carmine though i'd guess that you plug the vcr output into that device ! and the device into your Pc and IT will convert the vcr(video)(pal i 625) into some kind of modern AV file that a program on your pc like windows meadia file can play back ! Having gone down that route i expect you can then play those files via your enigma box too !
Rik
I
did you try (A) uploading the working channell lists from the good dm500 to the one in question ?
(B) swap round the dm500 positions to establish if that feed into the "dodgey box" is OK from the dish?
If you try both the above and there is still a problem then its pointing to the box ?
try a manual scan m8 and if it dosnt find them it can only be one of 3 problems
1 dish needing aligned
2 lnb shagged
3 faulty tuner
Hey Mad Bri Uk !
you need to establish if you have an intermittent fault on your LnB (dish electronics)
OR
If the dish needs aligning ? Before Writing off the box tuner ! ! !
This can be done easily with a Satellite Meter ! (so get a local aerial guy to check it out > phone about find someone who does a free call out)
OR
take you box to a friends house with a Working system and check it there ! of course it might have to be left there as a "bench test" for a few days but that way you can work out where the fault is !
as scoot says its only 1 of 3 things !
imo Faulty Lnb ...................
(however i dont know how long you had the box or what box it is ? the age of "the system" dish cable And the local weather conditions when this happens to you ?)
i assume aswell that you might have an original subscription box there so try that for a few days ! if that fine then you have your answer ? :baffle::confuse::matrix: :cool:
Also if i were you i would just wipe out the channells list you got there and do a full blind search ! alot of those channel lists miss a few chanells here and there !
i was at a mate house the other day and he didn't have eurosport ! so i manually scanned it in but then had to go through the box channell editor system to enable it in his favourites mode ! have you pressed ok and used the red button to get the entire channell lists or are you just using the fav ) even when i got the channel i had to use the box edit mode to move it to favs
Rik
nice post Redout !
A boxkey will be needed to access the premium services such as sport/films and Hd if your using a uk provider ! beer10
