Posts by Banny

Multi CardServer r63

- accelerated cache server
- fixed mgcamd enddate
- enabled radegast client
- enabled freecccam server
- added cccam server option "CCAM PROFILES" to set default profiles for all clients
- added mgcamd server option "MGCAMD PROFILES" to set default profiles for all clients
- added profile option "DISABLE NEWCAMD" to disable sending ecm to newcamd servers
- added profile option "DISABLE CCCAM" to disable sending ecm to newcamd servers
- added profile option "DISABLE RADEGAST" to disable sending ecm to newcamd servers
- added profile option "DISABLE CACHE" to disable receiving dcw from cache

Tried that, without success

Every time I try to upgrade oscam by downloading as per

http://linuxsat-support.com/oscam-files/4260-latest-oscam-file-linux-pc-32-64-bit-6.html

I get a segmentation error

Ive contacted seller to see which way I need to activate/register the card.

Suppose ill have to wait a lil longer.

2012/08/18 13:22:27 B738DA10 s >> OSCam << cardserver started, version 1.10rc-svn, build #6481 (i686-pc-linux-pcsc-libusb)
2012/08/18 13:22:27 B738DA10 s version=1.10rc-svn, build #6481, system=i686-pc-linux, nice=-1
2012/08/18 13:22:27 B738DA10 s client max. idle=120 sec, debug level=0
2012/08/18 13:22:27 B738DA10 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/08/18 13:22:27 B738DA10 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/18 13:22:27 B738DA10 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2012/08/18 13:22:27 B738DA10 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/08/18 13:22:27 B738DA10 s signal handling initialized (type=sysv)
2012/08/18 13:22:27 B738DA10 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/08/18 13:22:27 B738DA10 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/08/18 13:22:27 B738DA10 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/08/18 13:22:27 B738DA10 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/08/18 13:22:27 B738DA10 s monitor: disabled
2012/08/18 13:22:27 B738DA10 s camd33: disabled
2012/08/18 13:22:27 B738DA10 s camd35: disabled
2012/08/18 13:22:27 B738DA10 s cs378x: disabled
2012/08/18 13:22:27 B738DA10 s newcamd: initialized (fd=6, port=10000, crypted)
2012/08/18 13:22:27 B738DA10 s CAID: 0963
2012/08/18 13:22:27 B738DA10 s provid #0: 000000
2012/08/18 13:22:27 B738DA10 s radegast: disabled
2012/08/18 13:22:27 B738DA10 s http thread started
2012/08/18 13:22:27 B738DA10 s LCD thread started
2012/08/18 13:22:27 B738DA10 s creating thread for device 001:004
2012/08/18 13:22:27 B738DA10 s creating thread for device 001:005
2012/08/18 13:22:27 B738DA10 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/18 13:22:27 B738DA10 s waiting for local card init
2012/08/18 13:22:27 B7333B70 r reader thread started (thread=B7333B70, label=smargo1, device=001:004, detect=cd, mhz=600, cardmhz=600)
2012/08/18 13:22:27 B6B32B70 r reader thread started (thread=B6B32B70, label=smargo2, device=001:005, detect=cd, mhz=357, cardmhz=357)
2012/08/18 13:22:27 B734BB70 h HTTP Server listening on port 8888
2012/08/18 13:22:28 B738DA10 s init for all local cards done
2012/08/18 13:22:28 B738DA10 s anti cascading disabled

But its still showing no entitlements -

B7333B70 r 1 smargo1 ON OFF 127.0.0.1 0 pcsc 0000:0000 no data 00:02:30 OFF (no entitlements)
B6B32B70 r 2 smargo2 ON OFF 127.0.0.1 0 pcsc 0000:0000 no data 00:02:30 OFF (no entitlements)

I hadn't set device correctly, fixed that, think ill update oscam as well.

Still not sure how to check which is correct caid for my card.

Update 14.08.12 (no without adult option this time) -

Im trying to setup 2 cards in oscam having used the oscam/cccam autoconfig setup, following previous advice

oscam.server

[reader]
label = smargo1
protocol = pcsc
device = 0
detect = cd
cardmhz = 600
mhz = 600
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

[reader]
label = smargo2
protocol = pcsc
device = 1
#detect = cd
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 2
#caid = 0D0F

There are two possible caids for this -

CSlink 23.5E 0666 000000 I*****2 I***** 40,46,50 lenght 50 for Hustler cz Astra 19E
CSlink 23.5E 0D0F 000004,000008,00000C,000010 CRW Cryptoworks 7B,7C

my oscam staus looks like this -

2012/08/18 11:41:13 B74816C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5369 (i686-pc-linux)
2012/08/18 11:41:13 B74816C0 s version=1.00-unstable_svn, build #5369, system=i686-pc-linux, nice=-1
2012/08/18 11:41:13 B74816C0 s client max. idle=120 sec, debug level=0
2012/08/18 11:41:13 B74816C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/08/18 11:41:13 B74816C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/18 11:41:13 B74816C0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2012/08/18 11:41:13 B74816C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/08/18 11:41:13 B74816C0 s signal handling initialized (type=sysv)
2012/08/18 11:41:13 B74816C0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/08/18 11:41:13 B74816C0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/08/18 11:41:13 B74816C0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/08/18 11:41:13 B74816C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/08/18 11:41:13 B74816C0 s monitor: disabled
2012/08/18 11:41:13 B74816C0 s camd33: disabled
2012/08/18 11:41:13 B74816C0 s camd35: disabled
2012/08/18 11:41:13 B74816C0 s cs378x: disabled
2012/08/18 11:41:13 B74816C0 s newcamd: initialized (fd=6, port=10000, crypted)
2012/08/18 11:41:13 B74816C0 s CAID: 0963
2012/08/18 11:41:13 B74816C0 s provid #0: 000000
2012/08/18 11:41:13 B74816C0 s radegast: disabled
2012/08/18 11:41:13 B74816C0 s http thread started
2012/08/18 11:41:13 B74816C0 s creating thread for device 0
2012/08/18 11:41:13 B74816C0 s creating thread for device 1
2012/08/18 11:41:13 B74816C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/18 11:41:13 B74816C0 s waiting for local card init
2012/08/18 11:41:13 B7427B70 r reader thread started (thread=B7427B70, label=smargo1, device=0, detect=cd, mhz=600, cardmhz=600)
2012/08/18 11:41:13 B6C26B70 r reader thread started (thread=B6C26B70, label=smargo2, device=1, detect=cd, mhz=357, cardmhz=357)
2012/08/18 11:41:13 B7433B70 h HTTP Server listening on port 8888
2012/08/18 11:41:13 B6C26B70 r Wrong reader index: 1
2012/08/18 11:41:13 B6C26B70 r Cannot open device: 1
2012/08/18 11:42:00 B7433B70 h Restart requested by WebIF from 192.168.0.2
2012/08/18 11:42:00 B7433B70 h restart oscam requested
2012/08/18 11:42:01 B7433B70 h HTTP Server: Shutdown requested.
2012/08/18 11:42:13 B6C26B70 r Wrong reader index: 1
2012/08/18 11:42:13 B6C26B70 r Cannot open device: 1

Its ok ive got there, thanks for the link seamouse, ill add some info to the tutorial, in case anyone else has same problem.

how do I know which is 0 and which is 1 though?

You could always register and download them yourself :)

updated 16.08.12 -

updated 16.08.12 -

no i mean installing noip to a linux server, im getting access denited

Quote from seamouse

you need to read the access webif from outside the network post mate

http://linuxsat-support.com/os…ebif-outside-network.html

im not trying to access externally... yet

Im trying to setup no-ip.com as per the tutoral, but im getting access denied.

Second issue, if using two ominkeys, how do you specify which card will be in which?

Quote from thejoker

Is it possible to hide things like the c line on the vu+ box running vix. As I know where you press ok twice it shows the server line.

Why would you want to?

you tried the force overwrite option?

opkg install --force-overwrite /tmp/filename.ipk

How have you got everything else running is multics if you cant connect your card?

You can run the hub in modem mode and use a different router if thats a better option, but the standard vm firmware does not have an option for dyndns or simular.

Ok, so ive gone back to Ubuntu, installed the server edition and I am able to access my server using an ssh session in putty.

How would I then enable access to the box via tp, or simular to be able to run the script to autoinstall CCCam and OScam?